 |
 |
|
|
09-09-2018, 10:02 PM
|
#4 |
 Drives: 2009 Toyota Yaris Hatchback Join Date: Jun 2018
Location: SCIO NY
Posts: 4
|
The shield does not hit, the gouging marks are nowhere on the shield and wouldn't be on the pads as well if it were to hit. I drilled and tapped two bolts way back to hold it.
I'm unsure of how the wheel bearing could be too tight. The tolerances are pretty simple it only goes in so far into hun and into spindle... SO CONFUSING |
|
|
|
|
Threaded Mode