DIY - Headlights off with the Ignition Switch - Toyota Yaris Forums

Pbauscher01 · 11-03-2018, 09:42 PM

I would first like to thank you for this tutorial and offer an alternative as well. I bought the base for the relay as well and avoided splicing any wiring. I simply jumped pins 6-7 with a short length of wire and made all other connections by simply cutting and stripping the cars wires and connecting to the proper terminals. I did still use the tap connector for signal from the ignition though.
I have included a link for purchasing the relay and base from Amazon: uxcell DC 12V Coil Power Relay 10A DPDT LY2NJ with PTF08A Socket Base https://www.amazon.com/dp/B00XBGHB0C..._C5J3Bb9SQHDD4

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0	goku87	DIY / Maintenance / Service	127	02-19-2023 08:01 PM
DIY (08' USDM LB): Interior Light Color Change	revnull	DIY / Maintenance / Service	37	05-21-2016 01:59 PM
DIY: Yaris LB Halo Led Projector Headlights	goku87	DIY / Maintenance / Service	37	11-15-2013 07:23 AM
need pinout of ignition switch	mikenacarato	In Car Entertainment + Electronics (audio / video / alarm)	8	12-25-2008 11:20 AM
Ignition switch heats up	kurokoma-kun	General Yaris / Vitz Discussion	11	06-19-2007 03:53 PM

11-03-2018, 09:42 PM	#39
Pbauscher01 I've made a post! Drives: 2009 Toyota Yaris S Sedan Join Date: Nov 2018 Location: Upstate NY Posts: 1	I would first like to thank you for this tutorial and offer an alternative as well. I bought the base for the relay as well and avoided splicing any wiring. I simply jumped pins 6-7 with a short length of wire and made all other connections by simply cutting and stripping the cars wires and connecting to the proper terminals. I did still use the tap connector for signal from the ignition though. I have included a link for purchasing the relay and base from Amazon: uxcell DC 12V Coil Power Relay 10A DPDT LY2NJ with PTF08A Socket Base https://www.amazon.com/dp/B00XBGHB0C..._C5J3Bb9SQHDD4