DIY: OEM JDM HID Headlight Conversion

[govtec]

Originally Posted by DeeBee

Hi all,

I know this is an old thread but I just found it recently and ordered a set of JDM HID headlights for my ride.

I was hoping to get clarification on the wire orientation to connect from the H4 to the HID connectors.

Black is quoted as 12V, Hi Beam, and in some cases, Ground.
Could you please help me out with the correct orientation.

Thanks in advance,
DeeBee

What I did was basically followed the orientation of the 4 prong pins that enviri showed in the videos. If you do that you should be fine and just trace it back to the plugs in the headlight to confirm the orientation.