2zR swap worth it?

[myfirstyota]

Originally Posted by DarkShadowFox

, you need the XD cv axels, brakes, hubs, line hookups.2 Tail light gaskets 15....:

The hubs are NOT required when keeping the xd transmission and axles. The xd axles are larger on the trans side yes but they slide right into the 4 lug Yaris hubs. This also applies for the rear hubs. Xd, Yaris and Yaris SE disk brake axles all share the same size hubs.only difference is the lug count.

[DarkShadowFox]

Originally Posted by myfirstyota

The hubs are NOT required when keeping the xd transmission and axles. The xd axles are larger on the trans side yes but they slide right into the 4 lug Yaris hubs. This also applies for the rear hubs. Xd, Yaris and Yaris SE disk brake axles all share the same size hubs.only difference is the lug count.

why wouldnt you swap to 5x100 more wheel options 4x100 is garbage when it comes to wheels. the difference in strength is minimal and you get bigger brakes and you can even add corolla brakes if you want which are massive and powerful.

[tmontague]

Originally Posted by DarkShadowFox

why wouldnt you swap to 5x100 more wheel options 4x100 is garbage when it comes to wheels. the difference in strength is minimal and you get bigger brakes and you can even add corolla brakes if you want which are massive and powerful.

There is a ton of great aftermarket wheels offered in 4x100 unless you want to go to an all show and no go 17" + wheel.

Corolla brakes are not needed unless you want the bling factor which it hardly benefits. It upsets the brake bias unless you are going to the trouble of dealing with an aftermarket brake cylinder and/or proportioning vakve and brake booster. All that is needed is proper brake pads to deal with the temp range you operate in. This will give you more brake than you ever need and much more than a corolla brake.