Manual Transmission Bellhousing and Axle Dimesions - Toyota Yaris Forums

Zedicus · 06-30-2020, 05:06 PM

i have a spare 1NZ and i am in the midwest. you can have it if you are close enough to make the trip. the head is in good shape but the block would need 1 size over pistons put in it. includes new water pump, coils, maybe a stock exhaust manifold if i can find it. it is pretty complete.

as for the tranny. the C50, and C59 are easyish to get in the states. remember that with minor mods the C6x and C150 should all go on also.

06-30-2020, 05:06 PM	#5
Zedicus Drives: scion xb Join Date: Apr 2020 Location: SW KS Posts: 30	i have a spare 1NZ and i am in the midwest. you can have it if you are close enough to make the trip. the head is in good shape but the block would need 1 size over pistons put in it. includes new water pump, coils, maybe a stock exhaust manifold if i can find it. it is pretty complete. as for the tranny. the C50, and C59 are easyish to get in the states. remember that with minor mods the C6x and C150 should all go on also.