New here and just got a 2009 Yaris!

[bronsin]

Remove the fake plastic valve cover and grab the metal valve cover underneath it. Try to give it a good shake. If it moves new Mounts are in order.

With the engine running you can also Revit up and down and see if the engine moves a lot.

Good luck and I wish I had my old 2009 three door hatchback I gave my son!

[Yarison Ford]

Originally Posted by bronsin

Remove the fake plastic valve cover and grab the metal valve cover underneath it. Try to give it a good shake. If it moves new Mounts are in order.

With the engine running you can also Revit up and down and see if the engine moves a lot.

Good luck and I wish I had my old 2009 three door hatchback I gave my son!

Did as you advised and it’s all good! Thanks for that. Now onto bleeding the clutch I might have my mechanic do it I’m not sure how hard it is or accessible. I’m probably going to have him do the brake pads as well. I’m new to working on Yaris but I do have experience working on older Toyota trucks.