Tein S Tech with Tokico Blue or Tein Street Advance Z coilovers

[Type-Y]

Originally Posted by Compeer

You can buy adjustible sway bar links, I would buy a set of these and adjust them to same exact length as the tiens were. Also do a google search by length of your swar bar. +/= 5mm will still fit just cant be too far off or itl have incorrect angles.

something like these https://www.motionmotorsport.net/pro...y-bar-endlinks

I have the Tien flex Z coil overs so if they ever stuff out i will be in the same boat so if you find a standard link thats the right size post your part number otherwise the adjustibles will do.

Thanks for your suggestion, much appreciated. I can't find the specs on what lenghts there are on the motionmotorsports part.

Originally Posted by sh0rtlife

find a "good" hardware store and you can get the ball ends and rod and make your own for a fraction of the cost...been there done that on a handfull of cars where the new bar made to fit doesnt match up with the OE links and somethings gotta be fabbed

personaly i go for the "open ball"(spherical ends) type vs the "ball-joint" type as you then get a nut/bolt assy and you can collar or machine a bolt to fit your application with perfection..even spacering out should you need a lil clearance ...sometimes finding the rod can be tricky but mcmaster car has it if you cant find it localy

FWIW the balljoint type of rod ends in that link are identical to parts used on some treadmills and ive got a handfull of em LOL

LoL, I like the possibility of that budget friendly suggestion


After a bunch of searching, including reaching out to Tein (still waiting for them to get back to me). I found, a Tein adjustable sway bar link on ebay that should fit. My links are 12.5 inches bolt to bolt and this one should fit, since it has an adjustability range from 290-350mm :

https://www.ebay.com/itm/19486331105....c101110.m1982

Its kind of pricey, but should fit. I'll probably order this. Just waiting to hear back if these are sold as a pair or if the price is for a single unit, which woudl be F-ing nuts.

I also found it at Vivid Racing for a better price:

https://www.vividracing.com/tein-swa...155247546.html

[Compeer]

Originally Posted by Type-Y

Thanks for your suggestion, much appreciated. I can't find the specs on what lenghts there are on the motionmotorsports part.



LoL, I like the possibility of that budget friendly suggestion


After a bunch of searching, including reaching out to Tein (still waiting for them to get back to me). I found, a Tein adjustable sway bar link on ebay that should fit. My links are 12.5 inches bolt to bolt and this one should fit, since it has an adjustability range from 290-350mm :

https://www.ebay.com/itm/19486331105....c101110.m1982

Its kind of pricey, but should fit. I'll probably order this. Just waiting to hear back if these are sold as a pair or if the price is for a single unit, which woudl be F-ing nuts.

I also found it at Vivid Racing for a better price:

https://www.vividracing.com/tein-swa...155247546.html

I will measure the tein links when i pull my adjustible setup back off for my warrant of fitness check in next week or so and will post exact length you need.

[Type-Y]

I heard back from Tein and they sent me the part number.

SPS23-R5916

They are $26 each.

[Compeer]

Originally Posted by Type-Y

I heard back from Tein and they sent me the part number.

SPS23-R5916

They are $26 each.

My original Tein flex z links are marked 913 and are 300mm long, the original links that came with my trd shocks and springs are 360mm. The advance Z must be taller than the Flex z I own.

[IMG]https://i.gyazo.com/1fa121a03cdc24956781d57355e5a038.jpg[/IMG

I made another post to document the Link sizes, if you could measure the links when you get yours as well and post them there that would be awesome.

[Type-Y]

Its been a while. Still have the Yaris.

I ended up using the Tein adjustable links:

SPS23-R5916

These worked well, though they were more expensive.