Intake air temperature circuit input high

[kevinj93]

Hopefully the details from the 2011 model are the same:-

Codes P0110, P0112 or P0113

The intake air temperature sensor is mounted in the mass air flow meter.
The wiring diagram shows it connected between pins 4 and 5 of connector B72 on the MAF, corresponding to pins 65 and 88 of connector B84 on the ECM.

The wire colours at the MAF should be pink for pin 4 and green for pin 5.

The resistance measured between these pins is dependent on air temperature, with higher resistance for lower temperatures. This could be around 1 - 2 ohms at 100 degrees F or 7000 to 10000 ohms at 32 degrees F.