DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation - Page 10 - Toyota Yaris Forums

CrimsonEclipse · 03-16-2024, 12:14 AM

Finally finally FINALLY getting to the CC mod

Looking at the install guide, it seems to imply that my 2011 M/T doesn't need wiring installed. Looks like it already has a clutch switch installed, and it seems that all I need to do is install the stalk.

Does that sound right?

(would be great if I can do this for $35)

Gemak · 03-16-2024, 10:00 AM

I have AT and followed the guides in this thread and now I have CC. Go for it, just be careful with the air bag

CarpeDiem · 07-30-2024, 12:53 AM

Hey guys, I got the kit today and installed the CC in a 2008 Yaris (no cruise light)...fast forward and I can't seem to get it to work. Did some troubleshooting over all connections (Pins are fully seated), checked the ground and the connection at the ECM all seem fine. When checking the voltage at D3 pin1 I have 13.3V, hold down the on/off switch and still 13.3V (not going to 0V). Could it be possible that the offshore Amazon stalk is bad out of the box? Any thoughts?

Thanks in advance

Markwelch415 · 08-10-2024, 10:47 PM

Does anyone have a link for the instructions? I can't seem to get this one to work. Thanks! In very interested in doing this!

thetut · 08-11-2024, 07:58 PM

Read post #152

BLH · 08-12-2024, 07:16 AM

It is in post #162

Cris_co1221 · 10-13-2024, 07:17 PM

Quote:

Originally Posted by CarpeDiem

Hey guys, I got the kit today and installed the CC in a 2008 Yaris (no cruise light)...fast forward and I can't seem to get it to work. Did some troubleshooting over all connections (Pins are fully seated), checked the ground and the connection at the ECM all seem fine. When checking the voltage at D3 pin1 I have 13.3V, hold down the on/off switch and still 13.3V (not going to 0V). Could it be possible that the offshore Amazon stalk is bad out of the box? Any thoughts?

Thanks in advance

I am having the same issue, but a 2007 3dr manual. I have all oem parts but cc not working, and same voltage issue when depressing the on/off switch.

Cris_co1221 · 10-19-2024, 07:41 PM

Quote:

Originally Posted by Cris_co1221

I am having the same issue, but a 2007 3dr manual. I have all oem parts but cc not working, and same voltage issue when depressing the on/off switch.

My issue was pin #2 on d3 wasn’t fully inserted (ground wire), got that hooked up and am fine now.

scott10301 · 06-01-2025, 11:19 PM

Just did the install today and no luck. I have a 2007 with no indicator light and want to troubleshoot to see if I'm at least the switch to the ECM is working.

How do I troubleshoot this? I saw that some are mentioning that they're testing voltage while depressing the on/off switch. Are you removing the pin from the D3 connector and then using a multimeter to test? I'm not sure how else that would be done. I did pull the pin and checked and am getting 13.3 volts whether I press the on/off button or not.

scott10301 · 08-11-2025, 06:20 PM

Update - I found the issue. The splice connector under the hood was not set up properly. Set it up correctly and all is working well.

Bastnt · 10-27-2025, 03:04 PM

GIVING ADVICE TO AVOID A STUPID MISTAKE I MADE on my Toyota Yaris III (100 VVT-i Collection 5p, 2010–2015)

I spent a lot of time browsing forums to get the cruise control stalk to work on my car (the clutch switch and CC light on the instrument cluster were already in place).
The reason it wasn’t working was that I had wired it incorrectly in the steering wheel. At first, I plugged the stalk into the brown cable connector—it fit, but it was a bit smaller. Instead, I should have connected it where all the steering wheel cables meet (blue, brown, and yellow connectors). There was an empty slot there that perfectly matched the stalk connector.
For other Yaris models, you might need to install additional parts. Here’s a great step-by-step DIY guide:

https://www.toyotanation.com/attachm...iy-pdf.419080/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 08:50 AM
Cruise Control Available for 06/07 Yaris	TOYOTaejien	General Yaris / Vitz Discussion	8	08-27-2010 01:58 PM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 12:59 PM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 05:54 PM

03-16-2024, 12:14 AM	#163
CrimsonEclipse Drives: . Join Date: Mar 2019 Location: . Posts: 96	Finally finally FINALLY getting to the CC mod Looking at the install guide, it seems to imply that my 2011 M/T doesn't need wiring installed. Looks like it already has a clutch switch installed, and it seems that all I need to do is install the stalk. Does that sound right? (would be great if I can do this for $35)

03-16-2024, 10:00 AM	#164
Gemak Drives: 2014 Yaris,TRD sway bar, suspe Join Date: Jan 2018 Location: Orange County Ca Posts: 8	I have AT and followed the guides in this thread and now I have CC. Go for it, just be careful with the air bag

07-30-2024, 12:53 AM	#165
CarpeDiem I've made a post! Drives: 2008 Yaris Sedan Join Date: Jul 2024 Location: Whitehorse Posts: 1	Hey guys, I got the kit today and installed the CC in a 2008 Yaris (no cruise light)...fast forward and I can't seem to get it to work. Did some troubleshooting over all connections (Pins are fully seated), checked the ground and the connection at the ECM all seem fine. When checking the voltage at D3 pin1 I have 13.3V, hold down the on/off switch and still 13.3V (not going to 0V). Could it be possible that the offshore Amazon stalk is bad out of the box? Any thoughts? Thanks in advance

08-10-2024, 10:47 PM	#166
Markwelch415 Drives: 08 hatchback Join Date: May 2022 Location: Northern CA Posts: 2	Does anyone have a link for the instructions? I can't seem to get this one to work. Thanks! In very interested in doing this!

08-11-2024, 07:58 PM	#167
thetut Drives: 2007 4dr sedan Join Date: Jun 2009 Location: Montreal Posts: 110	Read post #152

08-12-2024, 07:16 AM	#168
BLH Drives: 2007 Yaris Sedan Join Date: Apr 2009 Location: CT Posts: 281	It is in post #162

06-01-2025, 11:19 PM	#171
scott10301 Drives: 2007 3dr Hatchback Join Date: May 2025 Location: Fremont, California Posts: 6	Just did the install today and no luck. I have a 2007 with no indicator light and want to troubleshoot to see if I'm at least the switch to the ECM is working. How do I troubleshoot this? I saw that some are mentioning that they're testing voltage while depressing the on/off switch. Are you removing the pin from the D3 connector and then using a multimeter to test? I'm not sure how else that would be done. I did pull the pin and checked and am getting 13.3 volts whether I press the on/off button or not.

08-11-2025, 06:20 PM	#172
scott10301 Drives: 2007 3dr Hatchback Join Date: May 2025 Location: Fremont, California Posts: 6	Update - I found the issue. The splice connector under the hood was not set up properly. Set it up correctly and all is working well.

10-27-2025, 03:04 PM	#173
Bastnt Drives: Toyota Yaris 3 100 VVT-i 2015 Join Date: Oct 2025 Location: France Posts: 2	GIVING ADVICE TO AVOID A STUPID MISTAKE I MADE on my Toyota Yaris III (100 VVT-i Collection 5p, 2010–2015) I spent a lot of time browsing forums to get the cruise control stalk to work on my car (the clutch switch and CC light on the instrument cluster were already in place). The reason it wasn’t working was that I had wired it incorrectly in the steering wheel. At first, I plugged the stalk into the brown cable connector—it fit, but it was a bit smaller. Instead, I should have connected it where all the steering wheel cables meet (blue, brown, and yellow connectors). There was an empty slot there that perfectly matched the stalk connector. For other Yaris models, you might need to install additional parts. Here’s a great step-by-step DIY guide: https://www.toyotanation.com/attachm...iy-pdf.419080/