![]() |
|
|
|
#21 |
|
Super Moderator
Drives: 2014 White VITZ Join Date: May 2007
Location: Huntington Bch, CA
Posts: 4,938
|
If you run 16x7's and don't lower the car, then 205/50'16's should be just fine up front with any offset from +38mm to +45mm.
If you lower the car, then you'll have to adjust the offset and/or the tire width/height. I notice a lot of the Japanese guys run staggerd offsets on their Vitz: They typically run 7's with ET+42mm to +45mm up front and ET+35mm to +38mm in the rear. Of course, you can't rotate tires with staggered offsets, but that doesn't seem to be a consideration when you're trying to get the wheels/tires to clear properly and to look just right all 'round. Unfortunately, unlike wheels in Japan, we don't have many available here in the States with multiple offsets, although I have found a few at Tirerack. |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS Brand New Stock rims w/ Tires | FlintS | Items for Sale by private party | 10 | 09-24-2007 09:22 PM |
| FS: 17'' Motegi MR7 Rims and Khumo Tires | Sabretooth | Items for Sale by private party | 11 | 07-02-2007 03:55 PM |
| Need help when ordering my tires and rims | thomasward00 | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 04-26-2007 10:40 PM |
| FS: 07 yaris RS stock rims n tires | thegame11 | Items for Sale by private party | 5 | 04-15-2007 02:25 PM |
| hufeisen rims | JustYYaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 01-17-2007 04:16 PM |