|
03-09-2009, 03:17 PM | #19 | |
Quote:
ID# 0D031 is for vehicles with vin starting with a number (american built) im guessing our cars do not like TB"s from american built cars.....
__________________
EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD...... Last edited by BLAZINBLUEVITZ; 03-09-2009 at 04:50 PM. |
||
03-09-2009, 04:38 PM | #20 |
SIPNDEW
|
on both cars the throttle bodies came from japan. there is no american built TB on either car. the chassis may be built here in the us but the parts may not be. i opened up my corolla tb and my yaris tb and both are made by denso japan.
|
03-09-2009, 04:45 PM | #21 |
Nov 2006
Drives: Vitz S1600 Join Date: Apr 2007
Location: --
Posts: 93
|
car is running great with the new tb set up, no cels what so ever at this point
__________________
Cold Air Induction|Blitz SUS POWER Air Cleaner System|2.4L 2AZ-FE Throttle Body|Blitz Compressor System|Full Light weight pulley kit|GReddy Ti-C exhaust System|Blitz Throttle Controller|T/B Coolant Bypass + Gasket Trimmed|Weight deduction|Exhaust Manifold|Center pipe|PCV Bypassed |
03-09-2009, 04:48 PM | #22 |
REALLY, toyota parts catalog lists 2 different TB's for corolla/matrix based on vin numbers. my findings were already posted.......
__________________
EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD...... |
|
03-09-2009, 04:51 PM | #23 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Where do you see your gains? Low end? Top end?
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
03-09-2009, 05:06 PM | #24 |
SIPNDEW
|
ok so you found 2 part numbers..good job. my yaris throttle body pn is different than the 08s, was my car made in the usa? i dont think so. denso japan is made in japan.
|
03-09-2009, 05:12 PM | #25 |
im sorry MR KNOW IT ALL. i guess you can't comprehend what i wrote and i refuse to explain it to you. unsubscribed......
__________________
EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD...... |
|
03-09-2009, 05:38 PM | #26 |
Super Newbie
Drives: 2007 Yaris Liftback White Join Date: Jul 2007
Location: 626, Southern California
Posts: 180
|
#22030-0D030
Mine must be uber special ;) |
03-09-2009, 05:41 PM | #27 |
SIPNDEW
|
please feel free to explain it to me, ill listen. you said american made throttle body. the throttle body on that car is not made in america. the chassis and body panels are, but electrical and most engine components are still made in japan. go look at the sticker on a new camry or corolla and it says the percentages and what was made where. if they dont have that sticker on it, then ask them and they will go get it
|
03-09-2009, 06:42 PM | #28 |
Super Moderator
|
Gains are reported to be in the mid- to high-end of the spectrum. I still have to install it to see for myself.
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
|
03-09-2009, 09:10 PM | #29 |
I used to have 1700 posts
|
wait wait wait.
people with the 1zz tb were getting cel's? i never got one. i did get some oscilation but only in temperatures below freezing. could u swap the chips from the yaris 1nz to a scion tc tb? because i noticed a greater gain in power and response using the tc TB except i got thee CEL from it. |
03-09-2009, 09:55 PM | #30 |
Whooppee - you just got lucky. The rest of us had major CELs issues. Mine came on no matter what I did.
The gains seen with mine was major pickup mid to high end. The car really jumped @ 40 mph and continued excelerating from that point on, much stronger than stock. Drilling out these rivets is a pain, but I'm working on it. I see you also used a allen key bolt so you keep the bolthead size to a minimum. There's one spot of the six that is super close fitting for an 'other than rivet' attachment.
__________________
AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB |
|
03-09-2009, 10:06 PM | #31 |
I used to have 1700 posts
|
i'd rather b lucky than good.
im thinking about taking apart my tc throttle body. it sounds like something is loose inside of it. could something b broken inside of it? the 1nz throttle body sounds solid when u shake it, no noises or feelings of movement from the inside |
03-10-2009, 01:38 AM | #32 |
★weeaboo★
|
Well, I'll see if I have any CELs when I receive my TB next week. Won't bother with the chip swap at first and see what happens.
|
03-11-2009, 04:17 PM | #33 |
Okay. I just performed this excellent DIY with my 2 TBs. Everything looks, feels and sounds awesome. I'll report back if I get a CEL or not. This is an excellent mod for the money.
__________________
AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB |
|
03-11-2009, 04:28 PM | #34 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
how much do these go for and where can i get one from
|
03-11-2009, 04:46 PM | #35 |
See post #19, this thread.
__________________
AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB |
|
03-11-2009, 04:59 PM | #36 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
Thanks just bought one from the same guy
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1.8L Engine Swap, Possible? | Yaris T-Sport | Performance Modifications | 4 | 05-06-2007 06:57 PM |
swap for 2zz-ge???? | yarisTOONR82 | Performance Modifications | 12 | 03-23-2007 07:15 PM |