2004 Yaris verso pre-wired for cruise control

[nvukcevi]

option 1. worked as a charm. thanks a lot !!!!

CC is a aftermarket waeco ms-50
http://www.my-caravanning.com/en/pro...gler/MS-50/397
http://de.waeco.com/tmp/MS-50_EB_10S_02.pdf

i did is as following:

find a place for it under the hood, cut the brake vacuum line and connect to it


dissasembley the console
http://www.fitaudio.com/?View=entry&EntryID=45

connected +12V and ign 12V on the radio connector


tacho jack for speed sensor


always check the connection since i dont believe these clips, better way would be to solder it, but this does the work


there is a LED on the controler unit that flashes depeding on type of signal and if
the LED flashes more than once per secound, the black wire loops on
the electronic module have to be cut. This will change the impulse
count from 1,250 impulses/kph to 8,000 impulses/kph. this was needed so i cuted the black wire. didnt take picture but i found one on the web


connecting the cable to throttle


thats about it, one dayi will try to connect the cc remote to the original radio remote on the steeringwheel since im not using it.

once more thanks to scott for saving me a bunch of work with that speed sensor wire so i didnt had to install waeco magnetic speed sensors on the gearbox