GB- Push to Start , With SMART ENTRY - Toyota Yaris Forums

1NZYaris1 · 08-31-2010, 08:03 PM

Okay i have with Garm's approval
started a GROUP BUY on MI for the COST $250.US SHIPPED
Push to Start - Smart Entry RFID system

group Buy Thread is here
http://www.microimageonline.com/foru...mp-SMART-ENTRY-.

INFO THREAD IS HERE
http://www.microimageonline.com/foru...-Entry-for-279

You will also need to purchase this a
Fortin Key-Override-All. If you have Factory Power Locks and a Chipped Key http://ifar.ca/en/products/flash/key-override-all/

Thanks for looking

Kioshi · 08-31-2010, 08:15 PM

Ray, is there something going on for those of us who have already installed CTScott's PTS module w/ the PTS button and that would like to have the SMART Entry tied w/ it?

CTScott · 08-31-2010, 09:05 PM

Kioshi - To install this one you'd have to replace mine with it.

I am working on adding an RFID tag reader to mine to make it completely keyless. But, for a complete system that includes smart entry this seems to be a good deal. I was going to install one of these on mine, but I really like my remote starter and am going to add a hatch popper and this system doesn't support either of those.

Kioshi · 08-31-2010, 09:21 PM

Quote:

Originally Posted by CTScott

Kioshi - To install this one you'd have to replace mine with it.

I am working on adding an RFID tag reader to mine to make it completely keyless. But, for a complete system that includes smart entry this seems to be a good deal. I was going to install one of these on mine, but I really like my remote starter and am going to add a hatch popper and this system doesn't support either of those.

Will you be producing another RFID tag reader? I wouldn't mind going that route and having that added onto my car.

My ignition wires are so short from all the errors i went through with the alarm/module, I don't think i can fiddle around with removing and adding this one to it

CTScott · 08-31-2010, 09:35 PM

Quote:

Originally Posted by Kioshi

Will you be producing another RFID tag reader? I wouldn't mind going that route and having that added onto my car.

My ignition wires are so short from all the errors i went through with the alarm/module, I don't think i can fiddle around with removing and adding this one to it

Yes, my intention is to make the RFID reader an add-on for my existing module.

1NZYaris1 · 08-31-2010, 11:04 PM

Quote:

Originally Posted by CTScott

Yes, my intention is to make the RFID reader an add-on for my existing module.

When , before or after the the Yari Guage

any estimate on price .

eTiMaGo · 08-31-2010, 11:33 PM

btw I am using an earlier version of this kit for about 6 months now, it rocks. Not having to fumble for keys is just priceless!

CTScott · 09-01-2010, 08:19 AM

Quote:

Originally Posted by 1NZYaris1

When , before or after the the Yari Guage

any estimate on price .

Before. This is actually a much easier bit of development than the YarGauge. Price is looking to be $100 for the PTS module with the RFID reader and 4 RFID key tags (two that are literally the size and thickness of a credit card and two keyfob tags). It would also require a PTS switch, which can typically be purchased for ~$79.

Kioshi · 09-01-2010, 12:51 PM

I'm in...
could you use the 6-pin connector for when I purchase the module w/ the reader from you CTScott? I think thats how you wired up my PTS switch + module. :)

1NZYaris1 · 09-01-2010, 04:17 PM

Quote:

Originally Posted by CTScott

Before. This is actually a much easier bit of development than the YarGauge. Price is looking to be $100 for the PTS module with the RFID reader and 4 RFID key tags (two that are literally the size and thickness of a credit card and two keyfob tags). It would also require a PTS switch, which can typically be purchased for ~$79.

Will the modual read the Tach signal this time , lol.
i know i shouldn't stall the car , but i do lol

CTScott · 09-01-2010, 04:26 PM

Quote:

Originally Posted by 1NZYaris1

Will the modual read the Tach signal this time , lol.
i know i shouldn't stall the car , but i do lol

Yes. The voltage measuring method of deciding if it's running is just not accurate enough.

mrbond · 09-07-2010, 01:01 AM

holy cowwwwww this is awesome! When would the deadline be to pay?

alamocoastie · 09-07-2010, 09:58 PM

Will it work for someone without power locks? or will I need to purchase solenoids for that?

1NZYaris1 · 09-07-2010, 11:52 PM

Quote:

Originally Posted by alamocoastie

Will it work for someone without power locks? or will I need to purchase solenoids for that?

Uhhhm , yes you need power locks for this to be keyless entry

Mr Bond

mrbondholy cowwwwww this is awesome! When would the deadline be to pay?

mrbondholy cowwwwww this is awesome! When would the deadline be to pay? holy cowwwwww this is awesome! When would the deadline be to pay?

PM me if you want

zaheerb · 09-09-2010, 02:20 PM

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

Kioshi · 09-09-2010, 06:44 PM

Quote:

Originally Posted by zaheerb

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

Hello there,

If you want to buy the Push Start Module w/ the Push Start Button without having the SmartKey system...you need to contac CTScott on this forum for the module.

If you go on ebay, and search for Push to Start button...you wil find Avalon, Camry, Lexus buttons. Any buttons from those models will work on your Vitz.

1NZYaris1 · 09-11-2010, 04:47 PM

Quote:

Originally Posted by zaheerb

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

Or i can sell you mine for $90.US Shipped 100% complete with Button

*tk-421* · 09-11-2010, 11:07 PM

I wish I had the money for this!

08-31-2010, 11:33 PM	#7
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	btw I am using an earlier version of this kit for about 6 months now, it rocks. Not having to fumble for keys is just priceless! __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

09-07-2010, 01:01 AM	#12
mrbond View User's Garage Drives: 2008 meteorite hatchback Join Date: Nov 2008 Location: Illinois Posts: 960	holy cowwwwww this is awesome! When would the deadline be to pay? __________________ - HOOOEY! That's one tahny little cawr! What the heck kinda toy is that? - A Toyota Yaris - A whut Yaris?

09-09-2010, 02:20 PM	#15
zaheerb Drives: Toyota Vitz 2008 Join Date: Sep 2010 Location: Islamabad Posts: 5	Interested in buying the complete Push Start Module Hi all, Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

09-11-2010, 11:07 PM	#18
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	I wish I had the money for this! __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Northeast DIY Remote Start / Keyless Entry Workshop - Sunday, October 26	CTScott	General Yaris / Vitz Discussion	51	11-10-2012 01:32 PM
FS: Push to Start Trim Piece	CTScott	Items for Sale by private party	36	05-28-2010 12:42 PM
Push Button Start	Stoln	Europe (continental)	20	05-24-2010 07:56 AM
push start vs electric start?	yaris2010RS	General Yaris / Vitz Discussion	18	04-07-2010 02:20 PM
Toyota Smart Start	Blue Yaris	General Yaris / Vitz Discussion	0	04-02-2010 07:48 AM

08-31-2010, 08:15 PM	#2
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	Ray, is there something going on for those of us who have already installed CTScott's PTS module w/ the PTS button and that would like to have the SMART Entry tied w/ it?

08-31-2010, 09:05 PM	#3
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Kioshi - To install this one you'd have to replace mine with it. I am working on adding an RFID tag reader to mine to make it completely keyless. But, for a complete system that includes smart entry this seems to be a good deal. I was going to install one of these on mine, but I really like my remote starter and am going to add a hatch popper and this system doesn't support either of those.

09-01-2010, 12:51 PM	#9
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	I'm in... could you use the 6-pin connector for when I purchase the module w/ the reader from you CTScott? I think thats how you wired up my PTS switch + module. :)

09-07-2010, 09:58 PM	#13
alamocoastie Drives: 2008 Red LB Join Date: Nov 2008 Location: NY Posts: 15	Will it work for someone without power locks? or will I need to purchase solenoids for that?