BLITZ Compressor - Toyota Yaris Forums

Kenbow · 03-29-2006, 08:38 AM

BLITZ Compressor System was finally put on the market.

The price is 398.000 yen in Japanese yen.

NCP91 (Vitz RS) M/T&CVT is OK

Idjiit · 03-29-2006, 09:49 AM

The awesome thing about this system is you can control the level of boost you want. So if you want to save fuel for a long trip, dial it back. If you want to have a fun night at the dragstrip, crank it up. But at $3,500 it'll be on the end of my mod list. ;)

DJ_SpaRky · 03-29-2006, 01:34 PM

The GReddy S/C Kit has also been released, it comes with a eMange ECU Piggyback.

birdy · 03-29-2006, 04:02 PM

so basically 4k US

Idjiit · 03-29-2006, 04:05 PM

Quote:

Originally Posted by birdy

so basically 4k US

The Blitz Scion xA kit goes for $3,500 in the states, so I would imagine the Yaris kit (which may actually be identical) would be about the same.

blueajee · 03-29-2006, 08:39 PM

Wow, awesome!! I hope we can get it soon.

jcove · 03-29-2006, 08:42 PM

Quote:

Originally Posted by Idjiit

The awesome thing about this system is you can control the level of boost you want. So if you want to save fuel for a long trip, dial it back. If you want to have a fun night at the dragstrip, crank it up. But at $3,500 it'll be on the end of my mod list. ;)

Definately agree with you there. It'll be at the end of my list too. My only concern would be the strength of the engine. How long will it last? I guess if you have the cash to buy it you should beef up the engine first...? Just a thought.

Still this or the GReddy is my ultimate dream for this car. Not sure if I'll ever part with that much money though....I'm a bit of cheap skate at times. We'll see....

SmellyTofu · 03-29-2006, 10:26 PM

Is the Blitz S/C for NCP13 fit NCP91? or cannot fit because of ECU change?

Kenbow · 03-30-2006, 02:49 AM

Quote:

Originally Posted by SmellyTofu

Is the Blitz S/C for NCP13 fit NCP91? or cannot fit because of ECU change?

BLITZ S/C is for NCP91
It exists for CVT with for M/T in the lineup of S/C

Fuel control controls it with Sub PC

SmellyTofu · 03-30-2006, 06:37 AM

Do you have a link to the Blitz web site? I cannot find it on the Japanese site.

I just need to find out if the NCP13 Blitz S/C is able to fit to a NCP91.

DJ_SpaRky · 03-30-2006, 08:38 AM

Quote:

Originally Posted by Idjiit

The Blitz Scion xA kit goes for $3,500 in the states, so I would imagine the Yaris kit (which may actually be identical) would be about the same.

the kits are different. the ECUs are different.

Quote:

Originally Posted by Kenbow

BLITZ S/C is for NCP91
It exists for CVT with for M/T in the lineup of S/C

Fuel control controls it with Sub PC

Sub PC...like a SAFC or an eManage?

Kenbow · 03-30-2006, 09:18 AM

Quote:

Originally Posted by SmellyTofu

Do you have a link to the Blitz web site? I cannot find it on the Japanese site.

I just need to find out if the NCP13 Blitz S/C is able to fit to a NCP91.

The homepage of BLITZ is http://www.blitz.co.jp/

Kenbow · 03-30-2006, 09:23 AM

Quote:

Originally Posted by DJ_SpaRky

the kits are different. the ECUs are different.

Sub PC...like a SAFC or an eManage?

It is a fuel controller who connects it between ECU and the distribution line the main.

DJ_SpaRky · 03-30-2006, 12:11 PM

Quote:

Originally Posted by Kenbow

The homepage of BLITZ is http://www.blitz.co.jp/

go to this page then look for トヨタ　then ヴィッツ　it shows you some info but no part number

Kenbow · 03-30-2006, 01:24 PM

Quote:

Originally Posted by DJ_SpaRky

go to this page then look for トヨタ　then ヴィッツ　it shows you some info but no part number

Did you examine it from the retrieval?
It is wrong.

http://www.blitz.co.jp/new-product/c...sor-system.pdf
http://www.blitz.co.jp/new-product/new_products.htm
http://www.blitz.co.jp/new-product/2006/2006-0027.pdf
http://www.blitz.co.jp/new-product/2006/2006-0026.pdf

If it wants to see, it is the best in accurate Page of Japan to use the translation software.

SmellyTofu · 03-30-2006, 04:21 PM

Thanks. Exactly the information I was after.

DJ_SpaRky · 03-30-2006, 04:36 PM

Quote:

Originally Posted by Kenbow

Did you examine it from the retrieval?
It is wrong.

http://www.blitz.co.jp/new-product/c...sor-system.pdf
http://www.blitz.co.jp/new-product/new_products.htm
http://www.blitz.co.jp/new-product/2006/2006-0027.pdf
http://www.blitz.co.jp/new-product/2006/2006-0026.pdf

If it wants to see, it is the best in accurate Page of Japan to use the translation software.

thank you for the info, I was just felling around in the dark trying to find info.

03-29-2006, 08:38 AM	#1
Kenbow Vitzliste Page Master Drives: Vitz 1.5X Kai & ARISTO 300 Join Date: Mar 2006 Location: japan Posts: 58	BLITZ Compressor BLITZ Compressor System was finally put on the market. The price is 398.000 yen in Japanese yen. NCP91 (Vitz RS) M/T&CVT is OK __________________ Vitzliste Web Page Master Kenbow http://www.k4.dion.ne.jp/~vitz/

03-29-2006, 01:34 PM	#3
DJ_SpaRky Resident Scion Guy Drives: 2008 Mazda3 S Sport Join Date: Mar 2006 Location: Groveland, FL (Near Orlando) Posts: 285	The GReddy S/C Kit has also been released, it comes with a eMange ECU Piggyback. __________________ Code: DiabolicJourney_SpaRky

03-29-2006, 09:49 AM	#2
Idjiit 5 Stars, Bitches Drives: Prius, Silver Yaris Liftback Join Date: Mar 2006 Location: Holly Springs, NC Posts: 451	The awesome thing about this system is you can control the level of boost you want. So if you want to save fuel for a long trip, dial it back. If you want to have a fun night at the dragstrip, crank it up. But at $3,500 it'll be on the end of my mod list. ;)

03-29-2006, 04:02 PM	#4
birdy I stay G'd Up Drives: 02 wrx wagon Join Date: Jan 2006 Location: denton,tx Posts: 262	so basically 4k US

03-29-2006, 08:39 PM	#6
blueajee Drives: 07 Yaris RS Join Date: Mar 2006 Location: Toronto, Ont Posts: 3	Wow, awesome!! I hope we can get it soon.

03-29-2006, 10:26 PM	#8
SmellyTofu 好多人& Drives: . Join Date: Feb 2006 Location: Sydney Posts: 264	Is the Blitz S/C for NCP13 fit NCP91? or cannot fit because of ECU change?

03-30-2006, 06:37 AM	#10
SmellyTofu 好多人& Drives: . Join Date: Feb 2006 Location: Sydney Posts: 264	Do you have a link to the Blitz web site? I cannot find it on the Japanese site. I just need to find out if the NCP13 Blitz S/C is able to fit to a NCP91.

03-30-2006, 04:21 PM	#16
SmellyTofu 好多人& Drives: . Join Date: Feb 2006 Location: Sydney Posts: 264	Thanks. Exactly the information I was after.