DDM HID kits $35 - Toyota Yaris Forums

2006fronty · 11-10-2009, 03:46 AM

I found these HID kits on my Tundra forum and figured I would let you guys know about this smoking deal. People seem to be having good luck with their kits. I'm about to pick up a couple sets for my Tundra and the Yaris.

http://www.ddmtuning.com/products/Ra...it-102-85.html

Nexus1155 · 11-10-2009, 03:57 AM

Very cool, i may just have to pick a set or 3 up!

AznGouki · 11-10-2009, 05:47 AM

Yeah saw these on my bmw forums. Let me know how these go. Been debating for a while if I should go ddm or stick with prolumens.

taKuto · 11-10-2009, 11:15 AM

the same stuff with a different sticker, go for ddm. they all come from a factory in china regardless of what the labels say. If you're convinced it's made elsewhere, it's just using the same schematics and components built at a different location. what you pay for is the warranty, nothing more.

Nexus1155 · 11-10-2009, 01:08 PM

i have stuff from china too, its just circuitry, there really isn't anything of quality control can screws up other than the bulbs themselves being bad.

Anyways, i say these are worth the shot, even the warranty sweetens the deal!

cali yaris · 11-10-2009, 01:34 PM

From the DDM site:

H4 hi/lo (+$25.00).

+ shipping, which was $10.50 to me = $70.45

I doubt it's a true bi-xenon hi/lo with a reflector, couldn't find a specific product description.

There are differences in ballasts, wiring, harnesses and bulbs. They do NOT all come from the same factory, that is ridiculous. I have samples from at least three Chinese factories, and I chose the best quality to carry in my store.

severous01 · 11-10-2009, 08:33 PM

i'd like to get mine from a german factory...hella/phillips/bmw/mercedes if i had my choices.

oh, and lemme tell you something about 'same thing just different parts'...so wha'ts the differnece from IBM and mac? nothing...same internals right? what about toshiba vs compaq? same thing again right??? wrong. it's called quality of parts used. the higher end manufacturers will always use higher grade parts with a much higher end product...that's why they're more expensive.

go ahead and use the cheap bolts on you're 28 psi boosted engine...hell, throw some nos in there for good measure....i'll stick with my ARP bolts and see who's lasts longest

AznGouki · 11-22-2009, 05:32 AM

If it works then it works, that's that. A warranty to back up a failed item means you will get something guaranteed to work. Even things of high quality control will fail but the chances are lower. As I see it, there's nothing to lose. Kit is cheap and has a lifetime warranty so if it fails, let them know and they should send you a new one.

YarisSedan · 11-22-2009, 01:28 PM

The shop next to mine uses a lot of those. They had issues on some bimmers they installed them on like you would turn the headlights on and only one side owuld work. Turn it off and back on and other side would work..

I mean a HID kit for about the same price it would cost you for a good set of bulbs theres always got to be a catch. Cheap and good are typically not used in the same sentence except for this sentence for explination purposes =)

supmet · 11-23-2009, 05:10 PM

Quote:

Originally Posted by Nexus1155

its just circuitry, there really isn't anything of quality control can screws up other than the bulbs themselves being bad.

This is the most untrue statement I've ever read.

edit: and if the over-moderator who deleted my original post could PM me that would be suuuuper.

2006fronty · 12-11-2009, 09:43 PM

they"re $29.95 now lol

http://www.ddmtuning.com/index.php?p...=102&parent=85

cali yaris · 12-12-2009, 01:41 AM

^ plus the shipping and H4 cost, which you keep not adding in.

did anyone find out if they are true bi-xenon, or xenon+halogen?

MiniTRD · 12-12-2009, 02:21 AM

from the picture, they are neither (no high beam)

you can tell because there are only two leads - you need a third in any setup

jamal1984 · 12-12-2009, 09:16 AM

lifetime warranty? common guys, who still fall for this trick?

YAR1S · 12-12-2009, 09:44 AM

Stick with what everyone else is getting from garm. For something as important as headlights, I want good quality.

cali yaris · 12-12-2009, 12:33 PM

^ that's very kind, thank you. It IS good to see what's out there in the marketplace, but I think comparing these HID's to mine is not apples to apples in terms of function and quality.

cruz-gsr · 12-12-2009, 01:41 PM

all i can say is get it from garm, i got my sets from him and they work perfect.

ozmdd · 12-12-2009, 02:00 PM

Have to agree that just because they look similar, they aren't necessarily. I have a set of Xenon Vision bixenons, which was one of the more reputable brands ( I thought), but they do not have "equal" high beam patterns, and the color is slightly different between the bulbs, so that convinces me there is a reason to pay more for known quality.

11-10-2009, 05:47 AM	#3
AznGouki Metsu Drives: NCP91 ; E36 Join Date: Oct 2008 Location: Calgary Posts: 154	Yeah saw these on my bmw forums. Let me know how these go. Been debating for a while if I should go ddm or stick with prolumens. __________________

11-10-2009, 11:15 AM	#4
taKuto rice rocket Drives: 05 Echo Join Date: Feb 2007 Location: Toronto Posts: 163	the same stuff with a different sticker, go for ddm. they all come from a factory in china regardless of what the labels say. If you're convinced it's made elsewhere, it's just using the same schematics and components built at a different location. what you pay for is the warranty, nothing more. __________________

11-10-2009, 01:34 PM	#6
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	From the DDM site: H4 hi/lo (+$25.00). + shipping, which was $10.50 to me = $70.45 I doubt it's a true bi-xenon hi/lo with a reflector, couldn't find a specific product description. There are differences in ballasts, wiring, harnesses and bulbs. They do NOT all come from the same factory, that is ridiculous. I have samples from at least three Chinese factories, and I chose the best quality to carry in my store. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under microimage seller ID and customers can still make requests for anything specific. Last edited by cali yaris; 11-10-2009 at 01:49 PM.*

11-22-2009, 05:32 AM	#8
AznGouki Metsu Drives: NCP91 ; E36 Join Date: Oct 2008 Location: Calgary Posts: 154	If it works then it works, that's that. A warranty to back up a failed item means you will get something guaranteed to work. Even things of high quality control will fail but the chances are lower. As I see it, there's nothing to lose. Kit is cheap and has a lifetime warranty so if it fails, let them know and they should send you a new one. __________________

11-22-2009, 01:28 PM	#9
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	The shop next to mine uses a lot of those. They had issues on some bimmers they installed them on like you would turn the headlights on and only one side owuld work. Turn it off and back on and other side would work.. I mean a HID kit for about the same price it would cost you for a good set of bulbs theres always got to be a catch. Cheap and good are typically not used in the same sentence except for this sentence for explination purposes =) __________________ http://www.cardomain.com/ride/3210549

11-10-2009, 03:57 AM	#2
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	Very cool, i may just have to pick a set or 3 up!

11-10-2009, 01:08 PM	#5
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	i have stuff from china too, its just circuitry, there really isn't anything of quality control can screws up other than the bulbs themselves being bad. Anyways, i say these are worth the shot, even the warranty sweetens the deal!

11-10-2009, 08:33 PM	#7
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	i'd like to get mine from a german factory...hella/phillips/bmw/mercedes if i had my choices. oh, and lemme tell you something about 'same thing just different parts'...so wha'ts the differnece from IBM and mac? nothing...same internals right? what about toshiba vs compaq? same thing again right??? wrong. it's called quality of parts used. the higher end manufacturers will always use higher grade parts with a much higher end product...that's why they're more expensive. go ahead and use the cheap bolts on you're 28 psi boosted engine...hell, throw some nos in there for good measure....i'll stick with my ARP bolts and see who's lasts longest

12-11-2009, 09:43 PM	#11
2006fronty Drives: 2010 Mazda3 iTouring Join Date: Jun 2007 Location: San Bernardino Posts: 234	they"re $29.95 now lol http://www.ddmtuning.com/index.php?p...=102&parent=85 __________________

12-12-2009, 01:41 AM	#12
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ plus the shipping and H4 cost, which you keep not adding in. did anyone find out if they are true bi-xenon, or xenon+halogen? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-12-2009, 02:21 AM	#13
MiniTRD it's the MiniTRD View User's Garage Drives: 2009 Polar White 3dr Yaris S Join Date: Jul 2009 Location: Sacramento, California Posts: 126	from the picture, they are neither (no high beam) you can tell because there are only two leads - you need a third in any setup __________________ Clark 2009 Polar White 3dr Type S it's the miniTRD http://www.norcalcarstyle.com/minitrd/

12-12-2009, 09:16 AM	#14
jamal1984 The Beautification of Car View User's Garage Drives: Toyota Yaris S Join Date: Aug 2006 Location: Georgia, USA Posts: 967	lifetime warranty? common guys, who still fall for this trick?

12-12-2009, 12:33 PM	#16
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ that's very kind, thank you. It IS good to see what's out there in the marketplace, but I think comparing these HID's to mine is not apples to apples in terms of function and quality. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-12-2009, 01:41 PM	#17
cruz-gsr View User's Garage Drives: 08 Yaris Lift Back Join Date: Nov 2008 Location: Ashland Mass Posts: 512	all i can say is get it from garm, i got my sets from him and they work perfect. __________________

12-12-2009, 02:00 PM	#18
ozmdd Reluctantly Crouched... Drives: 2008 Yaris HB M/T Join Date: Oct 2008 Location: DFW, TX Posts: 867	Have to agree that just because they look similar, they aren't necessarily. I have a set of Xenon Vision bixenons, which was one of the more reputable brands ( I thought), but they do not have "equal" high beam patterns, and the color is slightly different between the bulbs, so that convinces me there is a reason to pay more for known quality.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HID kits - $115 shipped!	cali yaris	Sponsors Classifieds Area	18	07-25-2012 09:16 PM
FS Onyx HID Kits	JM Auto Racing	Items for Sale by private party	5	07-23-2009 12:08 AM
FS: Onyx HID KITS	JM Auto Racing	Items for Sale by private party	29	06-04-2009 03:55 PM
HID Blowout F1Spec Kits!	365Motorwerks	Sponsors Classifieds Area	30	04-05-2007 12:38 AM