Sportmaxx 513's! - Toyota Yaris Forums

mr_miles · 12-17-2011, 01:46 AM

going to go look at a set of Sportmaxx 513's with a 0 offset either tomorrow or Sunday. Going to be trading him the stockers and hopefully a DSI for them, lol. Praying I don't need a spacer. hopefully i'll have some new pictures up soon with some new shoes! I think they're going to look super good.

Has a link.
http://portland.craigslist.org/clc/pts/2752688696.html

wildmongoose26 · 12-17-2011, 02:10 AM

Whats the wheel width?
If its an 8+0 then you will NOT need a spacer of any kind.
Will need a pull, roll and camber on front and rear if you want to go any kind of low. Exp with that size tire.

mr_miles · 12-17-2011, 03:43 AM

they are 16x8. i'm all stock right now, so i wont have to worry about fenders. When I get the KIDO's from garm i'll worry about pulling fenders then. I expected that to be needed. might be fiberglassin' some flares instead, though. already have the general shape done in expanding foam, lol.

marlondog · 12-17-2011, 02:33 PM

I'd say save your cash, and wait for a set of wheels that will be more practical. Nothing worse than a set of wheels that won't fit without heavy modification. Fenders pulled(money), fenders rolled(money)negitave camber(money),and a gang of rubbing(a pain in da arse) is not worth the trouble. Better off getting some wheels that fit(16x7 35-45 offset) or get some flares and not have to worry about camber. Do whatcha like, but I'm just saying...

wildmongoose26 · 12-17-2011, 05:07 PM

16x8+0 is serious bodywork in the rear.
Thats what i'm running in the rear. Have 3 degrees camber, pulled and rolled fenders and they actually did a mini widebody on the rear to make it fit and i still rub on some dips.

I really need to get a picture next to a stock fendered yaris for comparison. It is 1.75" wider then factory. Part of the problem is since its not IRS the wheels do not camber in more when you hit a bump. so you have to have clearance straight up from where your at.

mr_miles · 12-18-2011, 02:19 PM

i was prepared for that, good news is i have access to a fender roller :D
Bad news is the guy bailed on me. went all the way out there to meet him and he didn't show. Kind of upsetting, lol.

wildmongoose26 · 12-18-2011, 05:03 PM

Trust me. YOu need more then a roller. Also kinda depends on what body style you have and how many doors. If your a 4 door your in for a world of fun! IF its a 2 door your still in for a world of fun, just a little less fun.

mr_miles · 12-18-2011, 08:10 PM

I have a two door. I know i'd need more than just a roller, but I'm up for a challenge. the wheels i wish i had, i found in 15x9 in the rear, - 15. So wont be getting those. the front at 15x8 -5 would fit a little better, lol.

it would look awfully sexy, though.

wildmongoose26 · 12-18-2011, 10:05 PM

What wheels is it you wish you had?

bzinn 1 · 12-19-2011, 12:55 AM

I say wait for better wheels.....16x8 on those is heavy for our car.....plus those will need rolled and rounded out fenders,camber,and right drop to look good....

The fronts gonna be a bit wide looking if you ask me,kinda poke out too much in front looks weird,backs you can do it to an extent and get away with it...but fronts will look weird.....maybe a 15 offset in front would look better.

mr_miles · 12-19-2011, 04:07 AM

lol, i've always wanted Rota Aleica's. I'm not really sure what i'm going to get now, the guy who had the buddy club QF (11 pounds each) forged never responds to my texts, the sportmaxx kid bailed, and the Aleica's are never in the right size, and they're heavy... i found 15x9 +10. thats pushin' it. if they were 15x8's i'd probably do it. i still might just say screw it and buy them. Make it work. I would have to finish the flares at that point. Wheels aren't that high on my list right now anyways, taxes aren't here and they wouldn't get fitted till spring. hell, i'd roll the aleicas in a +30 offset, they would tuck in pretty close then.

1.5 · 12-20-2011, 10:16 PM

Wow you are gonna need some crazy camber. You know these wheels brand new on ebay are like 450 bucks

http://www.ebay.com/itm/XXR-513-16-1...item4ab1ee0d97

mr_miles · 12-20-2011, 10:26 PM

indeed. the guy text me this morning, guess the other guy decided not to buy them. debating looking and test fitting, and offering him less with them on my car lol.

1.5 · 12-21-2011, 09:19 AM

Nice negotiation tactics.

mr_miles · 12-21-2011, 01:53 PM

Lol. He never told me where he worked. got as far as what exit to take off the hwy, that was it. Think he forgot that i need the rest. Or even an address, gps does wonderful things with addresses.

1.5 · 01-02-2012, 11:21 AM

why dont you go witha 15 in that size would be easier to fit.

12-17-2011, 01:46 AM	#1
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	Sportmaxx 513's! going to go look at a set of Sportmaxx 513's with a 0 offset either tomorrow or Sunday. Going to be trading him the stockers and hopefully a DSI for them, lol. Praying I don't need a spacer. hopefully i'll have some new pictures up soon with some new shoes! I think they're going to look super good. Has a link. http://portland.craigslist.org/clc/pts/2752688696.html

12-20-2011, 10:16 PM	#12
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Wow you are gonna need some crazy camber. You know these wheels brand new on ebay are like 450 bucks http://www.ebay.com/itm/XXR-513-16-1...item4ab1ee0d97 __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

12-21-2011, 09:19 AM	#14
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Nice negotiation tactics. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

01-02-2012, 11:21 AM	#16
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	why dont you go witha 15 in that size would be easier to fit. __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
XXR 513's 16x7 +15	Saggio	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	55	07-11-2011 11:41 PM
FT - 15x8 XXR 513's Blk/Red for 15" Steelies & tires & $400 (NY/NJ/PA)	Type X	Items for Sale by private party	8	08-27-2009 09:51 PM
FS: 16x7 XXR 513's	Saggio	Items for Sale by private party	22	04-03-2009 11:03 AM

12-17-2011, 02:10 AM	#2
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Whats the wheel width? If its an 8+0 then you will NOT need a spacer of any kind. Will need a pull, roll and camber on front and rear if you want to go any kind of low. Exp with that size tire.

12-17-2011, 03:43 AM	#3
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	they are 16x8. i'm all stock right now, so i wont have to worry about fenders. When I get the KIDO's from garm i'll worry about pulling fenders then. I expected that to be needed. might be fiberglassin' some flares instead, though. already have the general shape done in expanding foam, lol.

12-17-2011, 02:33 PM	#4
marlondog Shut your fricken suck!!! View User's Garage Drives: 07' liftback Join Date: Mar 2007 Location: Lost Angeles Posts: 755	I'd say save your cash, and wait for a set of wheels that will be more practical. Nothing worse than a set of wheels that won't fit without heavy modification. Fenders pulled(money), fenders rolled(money)negitave camber(money),and a gang of rubbing(a pain in da arse) is not worth the trouble. Better off getting some wheels that fit(16x7 35-45 offset) or get some flares and not have to worry about camber. Do whatcha like, but I'm just saying...

12-17-2011, 05:07 PM	#5
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	16x8+0 is serious bodywork in the rear. Thats what i'm running in the rear. Have 3 degrees camber, pulled and rolled fenders and they actually did a mini widebody on the rear to make it fit and i still rub on some dips. I really need to get a picture next to a stock fendered yaris for comparison. It is 1.75" wider then factory. Part of the problem is since its not IRS the wheels do not camber in more when you hit a bump. so you have to have clearance straight up from where your at.

12-18-2011, 02:19 PM	#6
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	i was prepared for that, good news is i have access to a fender roller :D Bad news is the guy bailed on me. went all the way out there to meet him and he didn't show. Kind of upsetting, lol.

12-18-2011, 05:03 PM	#7
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Trust me. YOu need more then a roller. Also kinda depends on what body style you have and how many doors. If your a 4 door your in for a world of fun! IF its a 2 door your still in for a world of fun, just a little less fun.

12-18-2011, 08:10 PM	#8
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	I have a two door. I know i'd need more than just a roller, but I'm up for a challenge. the wheels i wish i had, i found in 15x9 in the rear, - 15. So wont be getting those. the front at 15x8 -5 would fit a little better, lol. it would look awfully sexy, though.

12-18-2011, 10:05 PM	#9
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	What wheels is it you wish you had?

12-19-2011, 12:55 AM	#10
bzinn 1 Drives: 2008 Yaris HB Join Date: Oct 2008 Location: University Place,WA Posts: 828	I say wait for better wheels.....16x8 on those is heavy for our car.....plus those will need rolled and rounded out fenders,camber,and right drop to look good.... The fronts gonna be a bit wide looking if you ask me,kinda poke out too much in front looks weird,backs you can do it to an extent and get away with it...but fronts will look weird.....maybe a 15 offset in front would look better.

12-19-2011, 04:07 AM	#11
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	lol, i've always wanted Rota Aleica's. I'm not really sure what i'm going to get now, the guy who had the buddy club QF (11 pounds each) forged never responds to my texts, the sportmaxx kid bailed, and the Aleica's are never in the right size, and they're heavy... i found 15x9 +10. thats pushin' it. if they were 15x8's i'd probably do it. i still might just say screw it and buy them. Make it work. I would have to finish the flares at that point. Wheels aren't that high on my list right now anyways, taxes aren't here and they wouldn't get fitted till spring. hell, i'd roll the aleicas in a +30 offset, they would tuck in pretty close then.

12-20-2011, 10:26 PM	#13
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	indeed. the guy text me this morning, guess the other guy decided not to buy them. debating looking and test fitting, and offering him less with them on my car lol.

12-21-2011, 01:53 PM	#15
mr_miles Drives: 2013 Yaris Join Date: Oct 2011 Location: Portland, OR Posts: 914	Lol. He never told me where he worked. got as far as what exit to take off the hwy, that was it. Think he forgot that i need the rest. Or even an address, gps does wonderful things with addresses.