|
11-20-2012, 01:56 PM | #1 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
Megan Coilover Install and Tips
Hey all,
hopefully this will be beneficial to those out there wanting to install these coilovers. The directions from Megan are a joke..Please note I take no responsibility for this install and don't claim to be a professional.. This is not a step by step diy, just simply showing you how the megans are assembled.
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 11-20-2012 at 02:28 PM. |
11-20-2012, 01:59 PM | #2 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#1- This is the most useful tool in my box, it's a craftsman offset box wrench, 17mm on one side and 19 on the other..This will save you alot of time on having to remove the windshield wiper assembly, simply bypass all the drama..
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 11-20-2012 at 02:35 PM. |
11-20-2012, 02:01 PM | #3 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#2- I got these from ebay, they support the car without messing up the pinch welds, was sick of using hockey pucks, worth every penny.
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:02 PM | #4 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
I have created a DIY and Garm made a tip thread on MI
It is not super in depth but should be a lot more helpful http://www.microimageonline.com/foru...ion-amp-Brakes http://www.microimageonline.com/foru...er-Install-DIY |
11-20-2012, 02:07 PM | #5 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#3-There are already plenty of other useful threads on how to take the struts out, I am assuming you have already done this..The following photos show how to assemble the megans..I found that the strut bearing does not fit in the megan supplied red piece, so I just put over it, I ended up using ALL of the OEM pieces..
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:10 PM | #6 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#4- When you reinstall the front on any mcpherson car you MUST LOAD THE SUSPENSION before you tighten the bolts. You can see that before tightenting the 19mm bolts the suspension is loaded
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 11-20-2012 at 04:10 PM. |
11-20-2012, 02:12 PM | #7 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#5- Here is a comparison of the Toyota OEM camber bolt on top vs the stock on the bottom..These are so awesome and superior in every way to the ingalls spc type
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:14 PM | #8 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#6--Front is done and moving to the back..Like others have mentioned the rear Megan spring is simply not low enough, I will be removing the spring perches.. Before
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 11-21-2012 at 10:48 AM. |
11-20-2012, 02:17 PM | #9 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
#7--And after! No more Megan spring perches and MUCH lower..I lowered the shock by 1" securing the spring in place.. I have no finger gap and the top of the tire is slightly tucked now
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 Last edited by DeathBeard; 11-21-2012 at 10:49 AM. |
11-20-2012, 02:19 PM | #10 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
Enjoy your coilovers
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:20 PM | #11 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
I just drove it around the block and the springs have settled rear tires are fully tucked..and my rear end scrapes like a mofo on my driveway
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:27 PM | #12 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
Nice you got way lower than I could on the sedan. Great write up, way better than mine lol
|
11-20-2012, 02:43 PM | #13 |
やりすぎだ~
|
|
11-20-2012, 02:45 PM | #14 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
as in the top is Toyota oem camber bolt and the bottom is toyota oem standard bolt
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 02:59 PM | #15 |
やりすぎだ~
|
Thanks! Weird, I'd thought the bottom would be the better one since it looks more robust.
|
11-20-2012, 03:44 PM | #16 |
Drives: 2010 Yaris S Join Date: Apr 2010
Location: Los Angeles, CA
Posts: 574
|
it has to be skinnier to acheive negative camber
__________________
"In his heart a man plans his course, but the Lord determines his steps." Proverbs 16:9 |
11-20-2012, 05:05 PM | #17 |
Form>Function
Drives: 07 Flint Sedan Join Date: Dec 2009
Location: Tampa
Posts: 4,018
|
The size difference creates the camber I believe because it angles the spindle.
I had no idea Toyota made camber bolts. I have ingalls. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Firefox/Chrome Tips for Better YW Browsing | tk-421 | Off-topic / Other Cars / Everything else Discussions | 13 | 11-26-2021 07:42 AM |
))) Tein Super Compact coilover install tips ((( | aucorium | DIY / Maintenance / Service | 4 | 10-25-2011 12:42 AM |
Install Tips | shambala9er | Cosmetic Modifications (Exterior/Interior) | 1 | 06-10-2009 10:01 PM |
Install Help Please! | beeheartsyou | In Car Entertainment + Electronics (audio / video / alarm) | 4 | 03-02-2009 11:29 AM |
Remote start Valet 561r install | AlexNet0 | DIY / Maintenance / Service | 17 | 12-29-2008 11:00 PM |