It's not a Yaris but it's a Toyota (Scion IQ)...

[jm350]

Hi everyone !!

You knew me with this car....


Now i have this....
Scion IQ 2012.


And i have this project...


So, i bought 2 rolls of carbone fiber wrap vinyl...


And i started my project....

Phase 1 (the hood) of the carbone fiber project is now completed successful !!!

First step, clean the hood and pull out the top moulding clips for a better finish.


Step 2, put some reference points for cutting the extra vinyl i don't need.


Step 3, just check if everythings is ok before starting the installation.


Step 4, ........the final result !!!




Phase two....

I made the eye lids for the headlamps, following the patern of the hood.




And i tinted the rear/back windows with 5% limo film...
(At the moment when i take the picture, the back glass was not done. Only both sides).


phase 3.....

I completed those body sections between the doors and the rear windows.
Because of the rain starting, i couldn't do the doors pillars, i'll do it next time.




phase 4....

The hatch !!

First i have to takeout everything (handle, wiper, dealer sticker, name plates), and clean it perfectly.


And put the CF....


And put back almost everything, and it's done !!


I had extra time before the rain comes (again), so i put some chrome lines on the front grills.



Next weekend i will continue the project and new pictures will follow !!