Please post pics of your Yaris with aftermarket rims here

[TRD93]

Mr.Canton- whats the offset on your wheels? do they rub? looks great.

07blackvitz- thats a sick stance!

contraband831- love the 5zigens and your spoiler

[YarisSedan]

I have TRD SPORTIVO shock and spring and well the rim is 17" x 8" wide with 235/40/17 Sumitomo HTRZ tyres
& a pimped out PUP
http://www.yarisworld.com/forums/images/funkygarage/553/IMG_3422.jpg
http://www.yarisworld.com/forums/images/funkygarage/553/IMG_0111.jpg
http://www.yarisworld.com/forums/images/funkygarage/553/upload.jpg

man those rims look badass on your yaris. What brand are those

[yaris07hb]

Before and after shots of PnutKar. Wheels are from a Mini Cooper, 42mm offset using Gorilla E/T Conical lug nuts (BMW uses studs on the Cooper). Removed the Mini logo from the center caps with a heat gun. The Toyota logo from the hubcaps would not fit within the center caps so I left them blank. Tires are Michelin Harmony, stock 185/60R15. Contemplated 195 and 205 but cost, wear, and warranty are an issue. It is my humble opinion that these wheels look very good on the car - they complement the "roundy" look nicely. Now it needs some "squat".

[YotaYaris]

YEP, some squat is needed for sure. Nice simple rims!!

[ddongbap]

Before and after shots of PnutKar. Wheels are from a Mini Cooper, 42mm offset using Gorilla E/T Conical lug nuts (BMW uses studs on the Cooper). Removed the Mini logo from the center caps with a heat gun. The Toyota logo from the hubcaps would not fit within the center caps so I left them blank. Tires are Michelin Harmony, stock 185/60R15. Contemplated 195 and 205 but cost, wear, and warranty are an issue. It is my humble opinion that these wheels look very good on the car - they complement the "roundy" look nicely. Now it needs some "squat".

You mean, they use bolts. We use studs. They use bolts.

[yaris07hb]

Oops - yes. They bolts, we studs.

[CTScott]

Before and after shots of PnutKar. Wheels are from a Mini Cooper, 42mm offset using Gorilla E/T Conical lug nuts (BMW uses studs on the Cooper). Removed the Mini logo from the center caps with a heat gun. The Toyota logo from the hubcaps would not fit within the center caps so I left them blank. Tires are Michelin Harmony, stock 185/60R15. Contemplated 195 and 205 but cost, wear, and warranty are an issue. It is my humble opinion that these wheels look very good on the car - they complement the "roundy" look nicely. Now it needs some "squat".

I run a set of the same Mini rims as my Winter rims. Their lug bolts are larger diameter than our studs and the hub is 2mm wider. If you aren't running hubcentric rings (I couldn't find ones to fit), you should use lug nuts that make the wheels lugcentric. I am using lugcentric bulge conical lug nuts that I found at Jegs that have the correct taper and have a part below the taper that fills the space between our studs and the wheel:

http://www.jegs.com/images/photos/300/306/306-5395-5.jpg

http://www.jegs.com/i/Detroit+Wheels/306/5395-5/10002/-1

[kimona]

The car looks great with those mini wheels. IMO, any of the Mini wheels would compliment the car.

[yaris07hb]

I run a set of the same Mini rims as my Winter rims. Their lug bolts are larger diameter than our studs and the hub is 2mm wider. If you aren't running hubcentric rings (I couldn't find ones to fit), you should use lug nuts that make the wheels lugcentric. I am using lugcentric bulge conical lug nuts that I found at Jegs that have the correct taper and have a part below the taper that fills the space between our studs and the wheel:

http://www.jegs.com/images/photos/300/306/306-5395-5.jpg

http://www.jegs.com/i/Detroit+Wheels/306/5395-5/10002/-1

Yes, we don't want wobbly wheels do we? I used these lug nuts from Gorilla. They look similar to the Jegs nuts, but not as "bulgey". I like the Jegs better. I'll have to get some.

[yarisugi]

I need a set... Gorilla nakes them? I think our local shop might have Gorilla brand but not Jegs.
Top pic is Jegs and bottom is Gorilla?

[YotaYaris]

Huh?

[CTScott]

I need a set... Gorilla nakes them? I think our local shop might have Gorilla brand but not Jegs.
Top pic is Jegs and bottom is Gorilla?

Correct. Jegs is a supplier, the manufacturer of the Jegs ones is actually Detroit Wheels.

The flare being wider than the flats on the Jegs ones makes a better fit than the gorilla ones.

[yarisugi]

CTScott - so the link you provided is the correct size/length for the Yaris?

[CTScott]

CTScott - so the link you provided is the correct size/length for the Yaris?

Yes, that link is from my order to Jegs. They come in packs of 5, so 4 packs gives you 16 + 4 spares.

[yaris07hb]

New "bulgey" lug nuts from Jegs arrived today (thanks to CTScott for the tip). They've been installed and torqued to spec. The Gorilla's weren't going to fall off and there were no issues over the last several hundred miles, but I do feel better with these installed. A note to any others thinking of using these or similar wheels:

Unlike the Gorilla's, these lug nuts are 3/4" (19mm) hex - smaller than the stock Yaris lug nuts and therefore will not fit the factory lug wrench. I took an old lug nut from my original steelies and welded it to a sacrificial socket and tossed it in with my goody bag in the spare tire well.

I think a reminder is in order here - when changing to non-stock wheels always keep a set for your spare.

Pat

[CTScott]

New "bulgey" lug nuts from Jegs arrived today (thanks to CTScott for the tip). They've been installed and torqued to spec. The Gorilla's weren't going to fall off and there were no issues over the last several hundred miles, but I do feel better with these installed. A note to any others thinking of using these or similar wheels:

Unlike the Gorilla's, these lug nuts are 3/4" (19mm) hex - smaller than the stock Yaris lug nuts and therefore will not fit the factory lug wrench. I took an old lug nut from my original steelies and welded it to a sacrificial socket and tossed it in with my goody bag in the spare tire well.

I think a reminder is in order here - when changing to non-stock wheels always keep a set for your spare.

Pat

Good reminder. I carry an X style lug wrench that will handle the factory lug nuts as well as the Jegs ones, but I don't carry 4 factory lugs for the spare.

[jethrojallas]

had my yaris for a while thought u guys might wanna see it

the color is red carmine metallic

the size is 18 inch wheels with 215 35 zr18 falkens

thinking of getting it lowered and i got the system for free but changed out the subs with memphis audio

just needa get an amp and hook it all up

enjoy

[Kal-El]

I have TRD SPORTIVO shock and spring and well the rim is 17" x 8" wide with 235/40/17 Sumitomo HTRZ tyres
& a pimped out PUP
http://www.yarisworld.com/forums/images/funkygarage/553/upload.jpg

Wow, nice setup. Tell us what rims those are! :smile:

:thumbsup:

[YarisSedan]

I can finally post in this thread...

http://i689.photobucket.com/albums/vv257/jasonlabar/rim5.jpg
http://i689.photobucket.com/albums/vv257/jasonlabar/rim6.jpg
http://i689.photobucket.com/albums/vv257/jasonlabar/rim7.jpg

[Kal-El]

I can finally post in this thread...


Nice! :thumbsup: Are those 16's on stock suspension?

[YarisSedan]

Nice! :thumbsup: Are those 16's on stock suspension?

they are 15s on trds

[Kal-El]

they are 15s on trds

Really?? Those definitely look like 16's. For some reason they just look bigger than the stock wheel size. I'm sure the drop has something to do with the illusion.

Cool.

[YarisSedan]

Really?? Those definitely look like 16's. For some reason they just look bigger than the stock wheel size. I'm sure the drop has something to do with the illusion.

Cool.

I am running a 55 tire size while most people usually go with 50s with 15" rims that could be it too so the overall diameter of tire and rim combination is larger

[Kal-El]

I am running a 55 tire size while most people usually go with 50s with 15" rims that could be it too so the overall diameter of tire and rim combination is larger

Actually, the correct size is 60's. 55's work good though especially when lowered like yours.

[YarisSedan]

Actually, the correct size is 60's. 55's work good though especially when lowered like yours.

I know. Even with 55s though i rub going over bumps. If i had to do it over again i would have just went with 50s.

[MR. CANTON]

man those rims look badass on your yaris. What brand are those

they are SPORT MAX With Sumitomo HTRZ 235 40 17

[MR. CANTON]

Wow, nice setup. Tell us what rims those are! :smile:

:thumbsup:

SPORT MAX RIMS
SUMITOMO 235 40 17

[Kal-El]

SPORT MAX RIMS
SUMITOMO 235 40 17

Thanks :smile:

[Kal-El]

SPORT MAX RIMS
SUMITOMO 235 40 17

So wait a second, you have 235 wide tires?? Don't you get serious rubbing?
I don't recall ever seeing anyone with that width.

[jasonroxbury]

im sorta new to this site... got my Yaris on November 30th.I have much enjoyed this site for all of the good information, and ideas.. here is what ive done so far....sorry for the not so good pics... i went with the 17" wheels and the 205-40-17 tiers ... not bad for a total price of $650 (before installation)http://i911.photobucket.com/albums/ac320/jasonroxbury/rims/DSCN0770.jpg


http://i911.photobucket.com/albums/ac320/jasonroxbury/rims/DSCN0773.jpg
<a href="http://s911.photobucket.com/albums/ac320/jasonroxbury/rims/?action=view&current=DSCN0771.jpg" target="_blank"><img src="http://i911.photobucket.com/albums/ac320/jasonroxbury/rims/DSCN0771.jpg" border="0" alt="Photobucket"></a>

http://i911.photobucket.com/albums/ac320/jasonroxbury/rims/DSCN0774.jpg

[BaknBlak]

I like that 5 door:w00t:

Here's a new pic from summer. 107 degrees in Palm Springs. Still on Superiors, 17x7x39 with 205/40's on NF's.

[ctrj]

15x6.5 Konig Brite-Lite (+38). 12lbs.
195/55R15 Dunlop Direzza Star Specs

http://pics.montypics.com/rjhodges11/2010-01-12/1263359204_dscn2551.jpg

http://pics.montypics.com/rjhodges11/2010-01-12/1263359232_dscn2552.jpg

The wheels were purchased from Brian at Goodwin Racing.

[Kal-El]

^^^ Looks nice!

Hey, is your sedan lowered? Looks like it.

[YotaYaris]

Nice Konig BriteLites, I have those in red.

I think he is lowered with Tokico blues | Progress springs

[brutal910]

18' x7.5 wheel and tires 215/35/18

[kiwi]

Here's some pic's

[yarisugi]

Love that rollin' pic! What a beautiful day for taking pictures.

[cali yaris]

SSR Type F 16x7, +42mm offset.
TOYO Proxes R1R 205/50/16

http://www.microimageonline.com/images/garm/photoshootDEC2009/051.jpg

http://www.microimageonline.com/images/garm/photoshootDEC2009/058.jpg

[07blackvitz]

Lowered car more..and added penguin 10mm hub spacers in the rear XXR-501 15x8 Front and Rear +15 Tein basic coilvers with one locking ring removed...3.5deg Negative camber front and rear.
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz008.jpg?t=1264048147
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz009.jpg?t=1264048191
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz007.jpg?t=1264048261
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz010.jpg?t=1264048361

[bzinn 1]

^that is beautiful......nicely done,i am gona experament with soem camber blocks this summer,at most 3 degrees and then drop on coils,for shows only then back to ride height to DD the car......

[Wita09]

Konig Retrack 16 x 7 +40, 195 50 16

[coffiend]

Lowered car more..and added penguin 10mm hub spacers in the rear XXR-501 15x8 Front and Rear +15 Tein basic coilvers with one locking ring removed...3.5deg Negative camber front and rear.
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz008.jpg?t=1264048147
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz009.jpg?t=1264048191
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz007.jpg?t=1264048261
http://i770.photobucket.com/albums/xx348/07blackvitz/VItz010.jpg?t=1264048361

:thumbsup: more pics please :clap:

[xbalance]

cali yaris,
how well your R1R perform in the wet?

[coltal]

http://www.users.freenetname.co.uk/~colint/resize4.jpg
springs fitted friday,had to buy tte ones £173 (due to been let down by ebay clowns) and £76 fitted rmb darlington 30mm lowering
also performance box fitted from ebay.. havnt messed with that yet but happy with default setting more lower end torque and mpg.

http://www.users.freenetname.co.uk/~colint/resize5.jpg
wheels fitted saturday 205 40 17.. toyota centre caps even fit,,
iam well pleased with out come
http://www.users.freenetname.co.uk/~colint/resize6.jpg
still settling....:biggrin:
http://www.users.freenetname.co.uk/~colint/resize3.jpg
rear spoiler next

[BajanAlan]

Konig Again 4 16x7 4/100 +40 BK rims
and Federal 195/5016 SS-535 tyres

[cali yaris]

Compomotives 13x9
Hoosier A6 255/40/13

The front calipers hit the back of the wheel so I need a thin spacer (5mm should be fine).

http://www.microimageonline.com/images/garm/racingwheels/0608.jpg

http://www.microimageonline.com/images/garm/racingwheels/0609.jpg

http://www.microimageonline.com/images/garm/racingwheels/0610.jpg

http://www.microimageonline.com/images/garm/racingwheels/0612.jpg

http://www.microimageonline.com/images/garm/racingwheels/0613.jpg

http://www.microimageonline.com/images/garm/racingwheels/0614.jpg

http://www.microimageonline.com/images/garm/racingwheels/0615.jpg

http://www.microimageonline.com/images/garm/racingwheels/0618.jpg

http://www.microimageonline.com/images/garm/racingwheels/0620.jpg

[Thirty-Nine]

Race ready rubber!

[justjesus]

Im sorry Garm. I'm totally gonna protest your car at the next auto cross! ahhh haha
that's too much man! (I'll be in CST next time. Suspension completed today)
:)

[marlondog]

Those are some sick ass cxr wheels. Where can I get a 15'' set in bronze? That has to be the coolest wheel style of all time. I even like them better than the networks I'm about to buy.

[Kal-El]

At 76,000 miles, finally got a set... :smile:

From The Tire Rack

Kazera KZ-X wrapped with General Altimax HP

16X7 40mm offset -17.2 lbs...and 205/50/16. These 16's are the same overall weight as the stock 15's - (35 lbs with inflated tire).

Still on stock suspension. At this point, I plan on keeping it that way as I want to maintain practicality and a nice ride (and to save money). I know visually, it would only improve to drop it but I don't think it looks that bad.

[eht13]

Still on stock suspension. At this point, I plan on keeping it that way as I want to maintain practicality and a nice ride (and to save money). I know visually, it would only improve to drop it but I don't think it looks that bad.
This pretty much sums it up for me too; I've been going back and forth recently about whether to get lowering springs or not, but I probably won't... and I feel pretty much the same as you do. Your new wheels look great, by the way. I have the 15" five-spoke OEM alloys on my sedan.

[BluYrs]

Summer look: 15'' Enzo R (http://www.enzo-wheels.com/506_EN.0?webdid=98).

http://img408.imageshack.us/img408/1986/2561044628ab78e69a18o.jpg

Winter look: 15'' BSA 264 (http://www.bsawheels.com.au/users/ProductDetail.aspx?id=160).

http://img708.imageshack.us/img708/1747/24405842985ce4281ba4b.jpg

[Black Yaris]

No longer drive a Yaris, but here is one of my RAV4 with my new wheels
http://i78.photobucket.com/albums/j111/jthomas43613/DSC_6368edit.jpg

[BrittaMac]

http://i303.photobucket.com/albums/nn146/bjsnowberger/DSC01128.jpg

My Yaris on new 18x7.5" Limited 500 wheels with low profile Nanking tires. Not the greatest scenery...

[Gatoblanco]

http://www.yarisworld.com/forums/attachment.php?attachmentid=8605&stc=1&d=1224437869
17" Enkei

I like these rims. They look like you have made the car look better but they are way

Black/charcoal rims look old/dirty/junk. I really dont get the attraction. The overall aesthetic are not nice.

Yours a simple but look sporty. They match the car well imo.

[minired5stby]

[QUOTE=cali yaris;440726]Compomotives 13x9
Hoosier A6 255/40/13

The front calipers hit the back of the wheel so I need a thin spacer (5mm should be fine).

http://www.microimageonline.com/images/garm/racingwheels/0608.jpg

Damn Garm now it looks like a Sprint car. I guess I 'll see you a Toyota Speedway:biggrin:

[Siffleu]

anyone can do somes photoshop with theses wheels?
http://www.rotawheels.com/images/products/aftershock_1.jpg

[jpadua]

here's mine :)
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/vsp/IMG_1376.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/IMG_1511.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/IMG_1379.jpg

[minired5stby]

Damn what is that 19" ^

[marlondog]

15x7 Konig Networks. After 4 years of being out of production, JLB motorsports was able to convince their peeps that people wanted this wheel. If you like, you need to contact them.

[minired5stby]

How many pairs of rims do you have now. You're always switching them out every other month or so. ^

[marlondog]

Last set of wheels I buy for this car! I sold the Konig Heliums the day after I bought these.

[10DG22]

I have some 15/7/0 offset wheels think they would be flush with the fender?

[mario98c]

15x7 Konig Networks. After 4 years of being out of production, JLB motorsports was able to convince their peeps that people wanted this wheel. If you like, you need to contact them.
Which is the size of the tire?

[marlondog]

I have some 15/7/0 offset wheels think they would be flush with the fender?

I think those bad boys will be popping out and will be needing some camber love or some skinny tires.

[marlondog]

Which is the size of the tire?

195/55 tires.

[kimona]

I have some 15/7/0 offset wheels think they would be flush with the fender?

15x7, ET40-42, 205mm rubber is dead flush up front.

[dEE89]

SSR Type F 16x7, +42mm offset.
TOYO Proxes R1R 205/50/16

http://www.microimageonline.com/images/garm/photoshootDEC2009/051.jpg

http://www.microimageonline.com/images/garm/photoshootDEC2009/058.jpg


finally

a one i like

[dodgyharo]

I can't claim to be original but we all know which Yaris in Seattle I got my inspiration from ...

Latest pics to date:

http://users.tpg.com.au/adsl6ii7/yaris000002.jpg
http://users.tpg.com.au/adsl6ii7/yaris000004.jpg
http://users.tpg.com.au/adsl6ii7/yaris000007.jpg

Just have to address some rubbing issues, fit an exhaust and I should be happy for a while.

[ode]

My yaris on 18"

http://media6.dropshots.com/photos/110786/20100413/195252.jpg (http://www.dropshots.com/ode#date/2010-04-13/19:52:52)

And my girlfriends aygo on 16"

http://media8.dropshots.com/photos/110786/20090403/172457.jpg (http://www.dropshots.com/ode#date/2009-04-03/17:24:57)

[derickveliz2]

New shoes on the block!

.

[cali yaris]

those will look great... when they're ON the CAR... :biggrin:

[kimona]

Yup, ^those^ will look good! Didn't swap the TPMS over to the new wheels?

[derickveliz2]

Thanks, I'm looking forward to see them mounted, I spent lots of time thinking about them.

I'm going to try to do the Bypass

http://www.yarisworld.com/forums/showthread.php?t=11058

Thanks again

Derick.

[AdeJong 03]

lol put them on already

here are my work emotions. gonna do a legit photoshoot soon. ill post those pics when i get em

first 2 pics are with a 10mm spacer

last one is no spacer

im currently running 5mm all around-

the pg 10mm hub spacers have always been on though

http://i48.photobucket.com/albums/f240/AlbertTI/DSC02222.jpg

http://i48.photobucket.com/albums/f240/AlbertTI/DSC02225.jpg

http://i48.photobucket.com/albums/f240/AlbertTI/DSC04319.jpg

[47_MasoN_47]

Here's my Yaris on 16" Sport Edition CD wheels with Kumho Ecsta RSX tires.

http://i30.photobucket.com/albums/c305/m450n/Yaris/IMG00009-20100419-1246.jpg
http://i30.photobucket.com/albums/c305/m450n/Yaris/IMG00010-20100419-1246.jpg
http://i30.photobucket.com/albums/c305/m450n/Yaris/IMG00011-20100419-1246.jpg

[arunto]

MB Competition 15"x7" with Falken Azenis RT-615
http://img.photobucket.com/albums/v381/ARunto/yaris/DSC_2466.jpg

[fnkngrv]

Received my new shoes in the mail. DxR white 17x7's +38 offset 14.8lbs wrapping them in 205/40/17 Falken ze912's ...I am stoked! All I have is a crappy camera phone pics for now...

http://memimage.cardomain.com/ride_images/2/4523/1601/23805800034_large.jpg
http://memimage.cardomain.com/ride_images/2/4523/1601/23805800035_large.jpg
http://carphotos.cardomain.com/ride_images/2/4523/1601/23805800036_large.jpg
http://carphotos.cardomain.com/ride_images/2/4523/1601/23805800038_large.jpg
http://carphotos.cardomain.com/ride_images/2/4523/1601/23805800037_large.jpg

[JumpmanYaris]

SThanks, I'm looking forward to see them mounted, I spent lots of time thinking about them.

I'm going to try to do the Bypass

http://www.yarisworld.com/forums/showthread.php?t=11058

Thanks again

Derick.

them wheels look good, I have always liked the red sedan

[leinadeb]

Evo Regamaster limited edition and lightweight rims.. 16" rims with 45 offset

http://i1022.photobucket.com/albums/af344/leinadeb13/DSCF3234.jpg

http://i1022.photobucket.com/albums/af344/leinadeb13/DSCF3235.jpg

http://i1022.photobucket.com/albums/af344/leinadeb13/DSCF3238-2.jpg

[ariman]

205/55R15, Rota wheels 8" ET +30
D4D diesel

http://img687.imageshack.us/img687/4227/p43000073.png

[toy_toronto]

Had the SLR out and took some pics...

Enkei CDR9's wrapped with Parada Spec-2 (205/40ZR/17).

http://i911.photobucket.com/albums/ac316/mywebshare44/2010%20Toyota%20Yaris/enkei5.jpg

http://i911.photobucket.com/albums/ac316/mywebshare44/2010%20Toyota%20Yaris/enkei7.jpg

http://i911.photobucket.com/albums/ac316/mywebshare44/2010%20Toyota%20Yaris/enkei2.jpg

http://i911.photobucket.com/albums/ac316/mywebshare44/2010%20Toyota%20Yaris/enkei4.jpg

http://i911.photobucket.com/albums/ac316/mywebshare44/2010%20Toyota%20Yaris/enkei6.jpg


.

[fnkngrv]

Had the SLR out and took some pics...

Enkei CDR9's wrapped with Parada Spec-2 (205/40ZR/17).


Lookin real slick...you are in the same boat as me...need at the very least a mild drop...:thumbsup:

[derickveliz2]

:iono::iono::iono::iono:
:cry:



I just put my new wheels after all that work I did installing the spacers in the rear, now I think I'm going to remove them for this wheel set, because I get some rubbing in the back )o:

I took this picture at noon under the bright sun, not very good for a good picture, but just wanted to share.

http://i634.photobucket.com/albums/uu61/derickveliz/DSC_9494.jpg



The good thing is the difference in weight:

OEM wheels about 37 lbs:

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/DSC_9490-1.jpg


NEW O.Z. wheel about 32 lbs:

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/DSC_9491-1.jpg

[Kal-El]

^^^ Looking really good! Black wheels on red is a good match.

:thumbsup:

[derickveliz2]

^^^ Looking really good! Black wheels on red is a good match.

:thumbsup:

Thanks,

I'm going to have to go back to OEM because I couldn't take the spacer off, I need professional help. :cry:

D.

[33OH]

What's the offset on those OZ's Derick? I'd pull/roll the fenders and live with a little rub, they look great!

[derickveliz2]

What's the offset on those OZ's Derick? I'd pull/roll the fenders and live with a little rub, they look great!

Thanks,
they are 37mm (O.Z. Ultraleggera 16x7) and with the 10mm spacer they do rub. they hit right at the edge of the fender (metal part) kind of at 12 o'clock to 3 o'clock. Do you pull/roll with any special tools? or just with your bare hands (with gloves).

I really like them but the way they where rubbing my damage the tire pretty bad, I put the OEM in the back, OMG my car looks so silly.

Thanks again

Derick

[33OH]

forums.nasioc.com/forums/showthread.php?t=1777067

[33OH]

You also may want to talk to Garm about camber bolts.

[derickveliz2]

forums.nasioc.com/forums/showthread.php?t=1777067

Thanks! (o:

that and the camber bolts look like will make it!


Derick :thumbup:

[brutal910]

18x71/2 -tires cooper 215/35/18 not sure what wheel brand is bought the car like that ,ibeleive 1 1/2 inch drop springs.

[brutal910]

does anyone know what type of wheels these are? 18x7 1/2

[cali yaris]

Work Meister S1 15x9
TOYO R-888 235/45/15

better pics to come, I hadn't finished installing the flares when I took these.

http://www.microimageonline.com/images/products/cosmetic/fenderflares/0921.jpg

http://www.microimageonline.com/images/products/cosmetic/fenderflares/0922.jpg

http://www.microimageonline.com/images/products/cosmetic/fenderflares/0923.jpg

http://img.photobucket.com/albums/v411/HAWAIIANBUILT/2010/032%20TORC%2005%2008%2010/IMG_0369.jpg

[Russelt3hPirate]

i've never seen a 235 pinch on a 9 before.

what offset/disk are you running on the S12P's?

[cali yaris]

the R888's are a really fat tire. I believe we calculated it to be about a +15mm.

[Russelt3hPirate]

did you do the A or the O disk? It looks like at least 90mm of lip so I don't think you did the R

[Russelt3hPirate]

the R888's are a really fat tire. I believe we calculated it to be about a +15mm.

can you PM me the info on the flares, how much work was required, availability, pricing etc?

I think these would be perfect for a 13x8 +20mm with the 225/45/13's and the PG rear hub spacers.

thanks

[Rain]

I still hate Mike for having the ones I like LOL

[derickveliz2]

.

OHH I'm so happy! the rubbing it's gone!

I installed my new O.Z. Ultraleggera 16x7, 37mm offset, with 195/50/16 rubber! they are awesome, and about 7 pounds lighter than the OEM with snow tires I use. I also added a 10mm spacer in the back.

BUT... I was having rubbing issues on the rear axis. And thanks to people here in Yaris Wold, I got many possible solutions:

1. Take out 10mm spacers (for some reason there are stuck) and I really didn't want to do this.

2. Roll the fenders

3. Add a Camber Kit

4. Add a RING-TYPE COIL SPRING STABILIZER


So I started with number (4)- Spring Stabilizers, I installed them last night, put one OZ and went for a ride!

NO RUBBING, ok I went back home and put the other OZ and test them this morning on my way to work.

NO RUBBING!!!

The rear suspension got a little harder (not as soft) but feels really good! Lift UP the rear about 1/2 inch bringing the car to almost level with the front suspension the NF210s really make the car look like if I had something very heavy in my trunk, and now my car handles so much BETTER! like Loren told me about the Spring Stabilizers:

"Just jack up the car and squeeze on in on each rear spring. Will raise the ride height a little, and by removing an active coil from the spring, also raise the spring rate."

I'm still going to do the Camber Kit (there is no rubbing with full tank and my self but I bet once I add weight the tires will hit the fenders again) so this may help, I'm going to load my car and test it before adding camber. Roll the fenders as well! and if everything works well under LOAD I'm going to try to keep the spacer because looks so GOOD.



:thumbup: :thumbup: :thumbup: Thank you YarisWold!!! :thumbup: :thumbup: :thumbup:


http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/DSC_9578.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/DSC_9579.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/DSC_9587.jpg
Derick.
:thumbsup:

[StragglerX]

08' Sedan S, 5 spd w/ 205/50/16 Yoko S.Drive on 16" Drag DR9s w/ 40 offst. Clearance on full turns were tight but no rubbing on full loads and over humps. GPS reading same as speedo or no noticeable difference. Stock 15s weighs 31.8 lbs (w/ 38k miles), new wheel/tire w/o TPMS weighs 41.2 lbs. Rides nice, awesome grip. Did a 40 on a 20 turn like nothin! A 1" drop will complete this project.

[nazier]

Also post what type of rims you have (size, brand, style, etc), and which tires you have (size, brand, etc). This will help all us who are contemplating wheels and tires as to which size and style we might like to go with. Thanx.

got a 17" bersaglio covered with 205/40/zr17 firenza

[landrym28]

Hey StragglerX, love those rims. I've always been a fan of the black rim with the red stripe!

[StragglerX]

thanx landrym28, had a hard time deciding between high gloss finish and flat black. picked the flat coz i thought glossy is a bit too flashy like chromes. flat shows dirt easily though and harder to clean. what do u think of my clearance? should i just leave it alone or drop? what lowering spring should i get if i decide to drop? i'm thinkin a 1" to 1 1/2" drop should even it all around.

[jpadua]

18x7.5 Sato5 Wheels +40 offset
215/35/18 Firenza ST-08
Tein S.Tech with Spring Cushions on the rear
Just recently removed 5mm spacer on the rears now I have no rubbing what so ever. I do have some occasional rubbing when making turns on high speeds, very minimal though

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/may%2015%202010/IMG_2566.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/may%2015%202010/IMG_2564.jpg

[SLIK4]

^very nice. goin for the VIP style?

[minired5stby]

18x7.5 Sato5 Wheels +40 offset
215/35/18 Firenza ST-08
Tein S.Tech with Spring Cushions on the rear
Just recently removed 5mm spacer on the rears now I have no rubbing what so ever. I do have some occasional rubbing when making turns on high speeds, very minimal though

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/may%2015%202010/IMG_2566.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/may%2015%202010/IMG_2564.jpg

Looking good man any plans for the interior or engine bay?

[Palmer812]

Finally after waiting 6 weeks for wheels. Konig Lightspeed 15x6.5 +38 10.8 lbs. Falken ZE-502 205/50/15 lowered on Tigertecs. no rubbing at all.
33955

33956[/ATTACH

[ATTACH]33958

[marlondog]

Nice wheels! Are those tires rubbing in the front?

[Palmer812]

Thanks. No rubbing. The tires are new and only had 10 miles on them when I took the pictures.

[xiii]

Is that a stock Toyota body kit? or is it after market?

[mario.b]

http://img.auto.cz/moje.auto.cz/img/galleries/4befba56efbb5/4bfebbc1cbec1.jpg
http://img.auto.cz/moje.auto.cz/img/galleries/4befba56efbb5/4bfebbf50b4ff.jpg
http://img.auto.cz/moje.auto.cz/img/galleries/4befba56efbb5/4bfebbc97da78.jpg

my new DOTZ 6,5x15" FREERIDE Peak .

[mario98c]

Konig Heliums 15x6.5 195/55/15 and 2 inch drop.
http://img689.imageshack.us/img689/5807/dsc00518jv.jpg

[3stars_n_a_sun]

@mario98c: what springs are you using? or are you on coilovers?

[derickveliz2]

.
Very nice! I really like the "Lip" effect.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/may%2015%202010/IMG_2566.jpg

[mario98c]

@mario98c: what springs are you using? or are you on coilovers?

The car have Ag kit lowering Springs.

[PerfectoII]

08' Sedan S, 5 spd w/ 205/50/16 Yoko S.Drive on 16" Drag DR9s w/ 40 offst. Clearance on full turns were tight but no rubbing on full loads and over humps. GPS reading same as speedo or no noticeable difference. Stock 15s weighs 31.8 lbs (w/ 38k miles), new wheel/tire w/o TPMS weighs 41.2 lbs. Rides nice, awesome grip. Did a 40 on a 20 turn like nothin! A 1" drop will complete this project.

Very nice!!! Been looking at the very same Drags as my next set...I like the look...although...I'll be going 17"...

[OTA'sTOY]

RAZE R24 17x7 +40 GOLD NEXEN N5000 205/40r17

http://i793.photobucket.com/albums/yy217/masaokame55/side2.jpg

[suprajoey]

My Little Egg'ie.
Just installed the wing, and the new wheels.:thumbsup:

Wheels are XXR 006, 17x7
Falken 912 tires, 205/40/17

http://i33.photobucket.com/albums/d73/lildemon_06/047-1.jpg

http://i33.photobucket.com/albums/d73/lildemon_06/045-1.jpg

http://i33.photobucket.com/albums/d73/lildemon_06/043-4.jpg

[PerfectoII]

Nice "Falken" tires!!! ;)

[marlondog]

My Little Egg'ie.
Just installed the wing, and the new wheels.:thumbsup:

Wheels are XXR 006, 17x7
Falken 912 tires, 205/40/17

http://i33.photobucket.com/albums/d73/lildemon_06/047-1.jpg

http://i33.photobucket.com/albums/d73/lildemon_06/045-1.jpg

http://i33.photobucket.com/albums/d73/lildemon_06/043-4.jpg

Those wheels are fuccen hot!

[YotaYaris]

now drop it : )

[JumpmanYaris]

Wheels that I own so far

[suprajoey]

Nice "Falken" tires!!! ;)

Thank You.:thumbsup:


Those wheels are fuccen hot!

Thanks So Much, Much Appreciate it...!!:thumbup:


now drop it : )



:laugh:That is exactly my next modm it looks like a truck to me when i see it,:laugh: I think im going to go with some Eibach, with about 1inch drop all around...!!:iono:

[toy_toronto]

:laugh:That is exactly my next modm it looks like a truck to me when i see it,:laugh: I think im going to go with some Eibach, with about 1inch drop all around...!!:iono:

Then I suggest that you peruse this thread to get some ideas! :thumbsup:

-> Mild Drop (http://www.yarisworld.com/forums/showthread.php?t=27708)


.

[YotaYaris]

I dropped mine with Eibach's, and yes it is about a 1" drop. I am still on stock struts/shocks.

[suprajoey]

I dropped mine with Eibach's, and yes it is about a 1" drop. I am still on stock struts/shocks.

Pic's please...!!:thumbup:

-Also thanks for the website. great bunch of information...!!:thumbsup:

[YotaYaris]

Let me wash it up, and I will take some pics this weekend for ya.

[mupy]

Wheels that I own so far

WOW, that is so hot!!
How much you drop your car?

[07blackvitz]

Check out my new wheel Set up thanks to my Buddy Kyle for making them work...15x10 negative 30offset in the front 15x10 negative 25offset in the rear with 4deg camber front and rear Diamond racing wheels. on stretched Toyo tires and rolled and pulled fenders slight rubbing on turns but works. Who said you cant get crazy fitament.
http://i770.photobucket.com/albums/xx348/07blackvitz/yariflush2.jpg
http://i770.photobucket.com/albums/xx348/07blackvitz/Yariflush.jpg
http://i770.photobucket.com/albums/xx348/07blackvitz/yariflush3-1.jpg

[coheed]

Thats effin hot. What size tires?

[eTiMaGo]

lol that's beyond ridiculous :p

btw you got your rear tire on the wrong way around, you want those center threads to point forward so as to evacuate water out the sides...

[07blackvitz]

Yeah i know i got pop them off and put them on the right way LOL me and my buddy kyle in such a hurry to put them on and make em work...

[07blackvitz]

Plus the tires were worn on the insides previously from the other owner so i had to flip them to get some better wear....gotta get new tires for it soon anyway.

[07blackvitz]

This is a pic of my previous set up 15x8 0 offset XXR 513's....rolling to cars and coffee.on 195/45/r15 tires with 3 deg negative camber front and rear..

http://i770.photobucket.com/albums/xx348/07blackvitz/carsandcoffee.jpg

[suprajoey]

Let me wash it up, and I will take some pics this weekend for ya.

Thanks...!!:thumbsup:

[YotaYaris]

just washed it tonight, pics coming in the AM...........

[YotaYaris]

and of course my pics wont load

[YotaYaris]

STANCE : 15" Konig wheels on stock tires, Eibach Pro-Kit on stock shocks

[thebarber]

http://i22.photobucket.com/albums/b339/dabarber/yaris/rpf1/DSCF1808.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/rpf1/DSCF1806.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/rpf1/DSCF1809.jpg

[07blackvitz]

lol that's beyond ridiculous :p

btw you got your rear tire on the wrong way around, you want those center threads to point forward so as to evacuate water out the sides...

It is pretty ridiculous i was just running these for a day just to prove a point that you can run crazy fitament on are cars with a little work here and there....they actually came off my buddy Kyles car me and him were both curious if it would work this is his car,where i got the wheels from,if i really wanted to run them i would probably do flares like Garm did.
http://i770.photobucket.com/albums/xx348/07blackvitz/kylesmiata.jpg
http://i770.photobucket.com/albums/xx348/07blackvitz/miata2.jpg

[JayTee09]

Can finally post on here

Axis OG OldSchool 15x8 25 offset AOE springs stock shocks. rear fenders touch the tires anytime some one sits in the back or I hit a big enough incline/bump. dont like how the tires turned out.(little to wide and tall) but w/e trial and error are the best teachers :P

http://i111.photobucket.com/albums/n123/jaytee263/YARIS/36655_10150210257140018_658640017_1.jpg

[suprajoey]

STANCE : 15" Konig wheels on stock tires, Eibach Pro-Kit on stock shocks


:coolpics:
Sweet, Dude thats a Super Kool combination, nice drop, nice wheels and Awsome car...!!:thumbsup::thumbup::thumbsup::w00t:

-BTW, i purchased some TRD springs, and will be arriving next week, cant wait to install them myself, should be a blast, :burnrubber: and finally see the car lowered.:eyebulge:

[exsrt/smart]

This is a pic of my previous set up 15x8 0 offset XXR 513's....rolling to cars and coffee.on 195/45/r15 tires with 3 deg negative camber front and rear..

http://i770.photobucket.com/albums/xx348/07blackvitz/carsandcoffee.jpg

New to the forum as of today. Will likely trade in my Smart for a Yaris this week. Can you tell me about these rims please - sorry if you've done this countless times already. Thanks!

[Tylermayer]

new 17 Motegi

[wiliker]

Rota RB 15x7 30 offset.

[JayTee09]

http://i111.photobucket.com/albums/n123/jaytee263/YARIS/DSCN0249.jpg
http://i111.photobucket.com/albums/n123/jaytee263/YARIS/DSCN0250.jpg
http://i111.photobucket.com/albums/n123/jaytee263/YARIS/DSCN0251.jpg
better pics

[thebarber]

http://i22.photobucket.com/albums/b339/dabarber/yaris/rpf1/DSCF1822.jpg

http://i22.photobucket.com/albums/b339/dabarber/yaris/rpf1/DSCF1818.jpg

[MIGUELLOUREIRO]

Here is Mine, xtreme x1 rims with 185/60/R15 tyres, later im switching these to some 195/50/R15

[Gman61]

Lowered 1.7", 16x7 XXR 513 mags with 205/45/16 rubber

[marcus]

Lowered 1.7", 16x7 XXR 513 mags with 205/45/16 rubber

nice rims setup any rubbing on the back? What to offset and r u using spacers on the back

[darkMINI]

My HB with Acura fat fives and 195/60/15 Potenza's. Now to get it lower.

[microbe__]

Hi guys,

Ive been following this topic since i bought my 2007 Yaris Diesel. Now my dream comes to real in the end.

Here is my new shoes with 205 x 45 x 17. I ve no idea about the offset.

[custom Lftback]

^nice rims microbe!

[firemachine69]

You need some nice center caps there, barber. :wink:

[bigdave87]

My Older Rims
http://www.dragons-blood.co.uk/wheels.JPG

Standard Rims On My New SR Yaris
http://www.dragons-blood.co.uk/yaris wheels.jpg

[microbe__]

Thanks for the coments.

There is also center caps with toyota emblem available here for after market rims but it would look too much fake :iono:

I chose 205 x 45 x 17 instead of 205 x 40 x 17 so as to fill the gap a bit more. There is no rub at all but i am not sure what will happen if i install 30 mm Eibach springs.

if there is any such configuration without any rubbing please post.

My fiance will kill me if i buy a useless spring 2 months before the marriage :wub:

[Kaotic Lazagna]

New rims for my ride:

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR1.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0087.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0088.jpg

[RacerFreakXXX]

what are the specs on those wheels?

[Kimmy]

Original color for the drags & the car was not lowered or had tint
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs444.snc3/25474_383638608549_762008549_3715445_3918551_n.jpg

When it was on steelies lowered on tanabe springs & tinted
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs464.ash1/25474_383638613549_762008549_3715446_1847916_n.jpg

Got bored of the original chrome look on the drags, painted them pink
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs464.ash1/25474_383638423549_762008549_3715438_7239346_n.jpg

Got bored of the pink and decided to go with gold, & added a c-one wing.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs581.snc3/30666_407616668549_762008549_4285815_6745895_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs561.snc3/30666_407616748549_762008549_4285824_671747_n.jpg

Shes getting there little by little...:biggrin:

[goliath1812]

konig helium 15's

[darkMINI]

The gold Drags look awesome Kimmy

[fmicle]

http://ear0dw.blu.livefilestore.com/y1pZJXywaJVu6ObYjSl1WYGq4l-nJCNq3TpXW6kF_gmAuVR9DfZw3X_ByB8PLPawXnpZWZ9w1thow I3ue1hfo0yI-lOGpsFdFqS/IMG_2308.jpg?psid=1

[yaris4062007]

http://ear0dw.blu.livefilestore.com/y1pZJXywaJVu6ObYjSl1WYGq4l-nJCNq3TpXW6kF_gmAuVR9DfZw3X_ByB8PLPawXnpZWZ9w1thow I3ue1hfo0yI-lOGpsFdFqS/IMG_2308.jpg?psid=1

nice car, what size tire do u have it on. what brand tire.
thanx

[kdctuning]

My 2007 Yaris Hatch with TR Motorsport C1 in 15x7 with Dunlop Direzza Z1 star

http://i811.photobucket.com/albums/zz34/yarisblue/Yaris%20suspension/CIMG1301.jpg

[Kimmy]

The gold Drags look awesome Kimmy

thanks :)

[JumpmanYaris]

The gold Drags look awesome Kimmy

+1

[mick.wheelz]

http://uploader.mickwheelz.net/di-14127949985216.jpg

needs better pictures, but they are 16x7 +38 Work Emotion CR-kai copies.

[jdm-yaris]

my 4 door yaris S with 15inch sportmax 002 gunmetal tire size 195/50/r15
:))) two pics in 1!!!

[Yarice]

my 4 door yaris S with 15inch sportmax 002 gunmetal tire size 195/50/r15
:))) two pics in 1!!!

I was thinking of getting the 15x8 +15 xxr 501, How bad do you rub at 0 offset?

[marcus]

very bad...

[derickveliz2]

.

This is an update:

I added a Camber kit, that Garm sent me some time ago, he suggested -1.5 degrees and he quoted... "You are going to love it"

He was right! in person the car looks much better but also handles a LOT BETTER too. I do recommend this mod, I LOVE IT. Thanks Garm!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/09780aec.jpg

.
:thumbsup:


.

[brendan]

http://i829.photobucket.com/albums/zz214/waynadearlove/Photo0203.jpg

what do you guys think?

[daddz07]

Tein S-tech Springs with Stock shocks combination.
Hi to all!!

I am quite new to this forum and i bought my car since 07/08. I am kind of late to be a member. Anyway, I have an inquiry about suspension which is i know it is been a question by many already. I really want to make sure before i proceed.

What can you say about using The Tein S-tech lowering springs with the stock shocks?? Right now, i dont have the budget to buy the shocks yet but, I already have the springs. Although, i bought the springs used roughly 2 years old one of the members here?

1) Is the springs to soft or to bumpy if i use the stock shocks with this springs?
2) Does tein S-tech springs sag a lot??
3) Are the stock shocks a good combination for the TST springs? or a must that i buy a new shocks?
4) do they last? becauseby the time i bought the shocks, teh springs is no longer good?
5)what can you advise will be the best shocks that i can buy that is really good to the budget for a bum like me which of course can deliver long lasting performance.

Appreciate all your feedback in advance guys!!

[RangerBEH]

Here's mine... Konig Further 15"

6271

Hoping to lower her by winter time.

these look great. I have the same color with a body kit and tinted windows those rims would tie it together nicely. where did you find them and was the price reasonable.

[toy_toronto]

what do you guys think?

like the rims... i'd like the look even better if you drop the car :biggrin:

http://i911.photobucket.com/albums/ac316/mywebshare44/temp/4220368a.jpg

[TheEgo]

i´m from Guatemala, C.A lol this my Yaris or Echo in other country´s...

dunlop direzza´s dz101 195/50R15
tein Stech lower Springs.
etc.

http://i147.photobucket.com/albums/r309/TheEgoL3/P1080309Small.jpg
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/lowering/IMG_0044Small.jpg
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/lowering/P1080429Small.jpg
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/IMG_0253Small.jpg

here with 17" riax rims.
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/P1000445LargeSmall.jpg
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/P100071ddd0LargeSmall.jpg
http://i147.photobucket.com/albums/r309/TheEgoL3/1NZ-FE%20TS-Sedan/IMG_3258editedSmall.jpg

[derickveliz2]

i´m from Guatemala, C.A lol this my Yaris or Echo in other country´s...


Welcome TheEgo "Paisano" I'm from Guatemala too!

But I've been in the US since 1998.
puro chapin

.:thumbsup:

.

[brendan]

:burnrubber:like the rims... i'd like the look even better if you drop the car :biggrin:

http://i911.photobucket.com/albums/ac316/mywebshare44/temp/4220368a.jpg

mmmm . . . thanks but the drop . . . looks nice but i do not think my father would think the same lol , anyway thanks :thumbup:

[TheEgo]

Welcome TheEgo "Paisano" I'm from Guatemala too!

But I've been in the US since 1998.
puro chapin

.:thumbsup:

.

gracias, ya me sentia raro hablando en otro idioma...

que precioso yaris tienes.. saludos

[fnkngrv]

Latest pic of my ride, 17" DxR R-20 17x7 +38 offset wrapped in 205/60 Falken ZE912s:

http://pic90.picturetrail.com:80/VOL2333/11522219/23431012/390875640.jpg

[evoxgsr]

http://i4.photobucket.com/albums/y111/balataspin/1a8c0cb2.jpg

My fiancee's 09 yaris s. Lowered on Eibach pro kit, 16 x 7 +40 konig feathers wrapped in nitto neo gen 205/50. Super minor rub on driver side front on large dips going over 60mph. Sorry for sun with shadow combo on the picture.

[chrisj]

Here's mine with 17x7.5 +40.

[JayTee09]

smaller tires and better pics

http://i111.photobucket.com/albums/n123/jaytee263/YARIS/34907_10150219428550018_658640017_13062627_6364882 _n.jpg
http://i111.photobucket.com/albums/n123/jaytee263/YARIS/34907_10150219428560018_658640017_13062629_2375691 _n.jpg
http://i111.photobucket.com/albums/n123/jaytee263/YARIS/untitled.jpg

[yarisugi]

@evoxgsr - damn, that one is looking reeeeeel nice!

[MaLuQuEiRa]

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs214.ash2/47689_1360161658151_1654839820_1005330_2144754_n.j pg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs388.snc4/45072_1360161938158_1654839820_1005331_707176_n.jp g

MAK XLR ICE BLACK
205/45 R17

[fender_boi]

R3 branded Rimz (15 inches)
Yokohama Tires

http://www.yarisworld.com/forums/picture.php?albumid=500&pictureid=2993

http://www.yarisworld.com/forums/picture.php?albumid=500&pictureid=2987

http://www.yarisworld.com/forums/picture.php?albumid=500&pictureid=2983

[06_hbyaris]

Here ya go
http://i225.photobucket.com/albums/dd11/baovn/IMG_1651.jpg
http://i225.photobucket.com/albums/dd11/baovn/IMG_1650.jpg

yes the car need a wash

[Micro]

Motegi Racing 16" Wheels with 205/45/16 Tires

http://i4.photobucket.com/albums/y108/Drew360/abb185de.jpg

http://i4.photobucket.com/albums/y108/Drew360/630b2762-1.jpg

[Kal-El]

Motegi Racing 16" Wheels with 205/45/16 Tires

http://i4.photobucket.com/albums/y108/Drew360/abb185de.jpg


Nice wheels but those eyelids are very much illegal. Hope you don't use your car at night. They cover half the lights beam.

[Micro]

yea they are illegal... so is my exhaust and intake etc... i drive at night all the time... there is no noticeable difference at all.... the road in front of me is still lit up great and the high beams still work... no downside in my opinion:biggrin:

thanks for your concern though lol

[toy_toronto]

very nice micro. could u give us some more info on your eyelids? (material, etc.)

thanks -toy

.

[Kal-El]

yea they are illegal... so is my exhaust and intake etc... i drive at night all the time... there is no noticeable difference at all.... the road in front of me is still lit up great and the high beams still work... no downside in my opinion:biggrin:

thanks for your concern though lol

Doesn't Cali do vehicle state inspections?

[fmicle]

Doesn't Cali do vehicle state inspections?

Nope, we have smog every other year after your car is 5 years old. Strictly speaking, no modifications to intake and exhaust are allowed. Unless those modifications are certified by CARB (they get an EO [Executive Order] - a sticker which makes them legal). But there are no other technical inspections.

If you mod your car badly and you want to make it street legal, you could go to a smog ref and they would do a full inspection and decide. I was thinking about looking into it, but gave up on the idea. I'm thinking about getting a different car instead of dealing with the hassle (nice excuse, huh?) :smile:

[Micro]

very nice micro. could u give us some more info on your eyelids? (material, etc.)

thanks -toy

.

sorry it took me so long to reply... well the eyelids were an experiment of mine trying different shapes and coverage areas to find the balance of looking great and not affecting the headlights performance.

i wont go into detail on measurements and everything (unless you want it) but basically they are simply 4 coats of paint... the first coat needs to be white (for a good reflective surface for the light to bounce off of back into the reflectors) then three coats of your average flat black paint... or whatever color you are going for :biggrin:

thanks for the compliment toy:thumbsup:

[padre1964]

poor mans aftermarket rims :wink:

beauty rings $60
dust caps $10
gloss black paint $4
red valve caps $3
total $77

http://farm5.static.flickr.com/4153/4982720471_d51e582bc4_z.jpg (http://www.flickr.com/photos/photosbypadre/4982720471/)

http://farm5.static.flickr.com/4130/4982718883_0456172eee_z.jpg (http://www.flickr.com/photos/photosbypadre/4982718883/)

[toy_toronto]

poor mans aftermarket rims :wink:

beauty rings $60
dust caps $10
gloss black paint $4
red valve caps $3
total $77

looks very nice!

where can u get them rings? I bet they'd look even better if you lowered the car.

i've been tinking of doing the same and wondered how it would look when i go back to my all-season tires before this coming winter...

-toy

.

[padre1964]

15" Stainless Steel Wheel Beauty Trim Rings 1 3/4" Deep found on ebay

[33OH]

16 x 7.5 Kosei K1's +43 - gloss black with key lime branding, wrapped with 195/50/16 Falken ZE-329's. DF210's (lowered .5" in front) with 12mm hub spacers installed.

http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0261.jpg
http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0254.jpg
http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0248.jpg
http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0239.jpg
http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0237.jpg
http://img.photobucket.com/albums/v80/poisonherlungs/IMAG0234.jpg

[custom Lftback]

LOVE the rims Ryan. the lime accents really pop out. i have to get me some hub spacers, asap lol

[33OH]

Thanks Blaine! Yeah - I love the hub spacers, really sets the look for the whole car. :w00t:

[Vitz Rs Modellista]

My 2010 JDM Vitz RS Modellista with

- Volk Racing RE30 By Rays Engineering
Front wheels: 16" x 7" ET 45 with 2010 Yokohama Earth-1 Tyre (205/45 ZR 16)
Rear wheels: 16" x 7" ET 33 with 2010 Yokohama Earth-1 Tyre (205/45 ZR 16)
- Rays Wheel Nuts

I know that some will say "the car needs to be lowered" but I am not sure I want to compromise my usability of carrying 4 people around Bangkok with a lot of pot holes and horrible road surface.

Further modification are posted in my introduction thread listed below

best

Tony


http://www.yarisworld.com/forums/showthread.php?t=30467

[Freddie0288]

heres mine:

Advan SA3R 15x6.5 +32 w/ 205/50 Toyo Proxes4. Dropped on TEIN S-Tech springs. 5mm spacer in the rear.

http://i23.photobucket.com/albums/b378/ScoobyKeith205/IMG_1318.jpg

Lookin' Good!
:smile:

[KCALB SIRAY]

Monarch Nilo's
16x7 front +20, 3" lip
16x8 rear +20, 5" lip

[fnkngrv]

^ love the look...those would look hot with my car's color as well.

[Oggis]

My Yaris with R15 Made in China wheels :smile:
http://img801.imageshack.us/img801/1708/dsc0011x.jpg (http://img801.imageshack.us/i/dsc0011x.jpg/)


http://img163.imageshack.us/img163/8537/dsc0036pn.jpg (http://img163.imageshack.us/i/dsc0036pn.jpg/)

[docB]

I had these around. The rims are 14" diameter. Yes, BBS w/ 185/60R-14 and the others are 205/55R-14 Dot R compounds. Glad for the TPMS defeat posting.
doc

[B-Rock21]

Hey all,

This is my Yarii with 15" Speedline Champions (custom Bronze paint) with 205/50R15 Falken Ziex-512 Tires dropped with SSC Lowering Springs.

Let me know what you guys think.

[sleey0]

^

If your wheels were bigger with shorter tires it would look sweet!

[maxxman420]

:smoking:Got em the first day i got my car back from a crash

[33OH]

Hey Freddie, I don't suppose you're also "Keith Tinari" are you?
At least give him credit for showing a picture of his car (http://www.yarisworld.com/forums/showthread.php?t=19721).

I think he was attempting to quote, hence the 'looking good!' line at the bottom.

[custom Lftback]

:smoking:Got em the first day i got my car back from a crash

nice! those are the one's i'm getting!

[hazzy]

http://i815.photobucket.com/albums/zz80/haz0153/DSC_0469.jpg

16x7 Rota Torques ET40 wrapped in Yokohama A Drive R1's 205/45/16
(Steel Gray)

[marlondog]

Hey all,

This is my Yarii with 15" Speedline Champions (custom Bronze paint) with 205/50R15 Falken Ziex-512 Tires dropped with SSC Lowering Springs.

Let me know what you guys think.

That's a nice color for the wheels. What brand and name for the paint, if you don't mind me asking.

[teawrecks]

My Yaris with R15 Made in China wheels :smile:
http://img801.imageshack.us/img801/1708/dsc0011x.jpg (http://img801.imageshack.us/i/dsc0011x.jpg/)


http://img163.imageshack.us/img163/8537/dsc0036pn.jpg (http://img163.imageshack.us/i/dsc0036pn.jpg/)

i like these pictures a lot..

[33OH]

Hey all,

This is my Yarii with 15" Speedline Champions (custom Bronze paint) with 205/50R15 Falken Ziex-512 Tires dropped with SSC Lowering Springs.

Let me know what you guys think.

Very nice choice, looks awesome. :clap:

[B-Rock21]

That's a nice color for the wheels. What brand and name for the paint, if you don't mind me asking.

Thanks for the compliments guys.

It's a Dupli-Colour wheel coating paint: HWP105 - Bronze

http://www.levineautoparts.com/dupwheelpain.html

[Oggis]

i like these pictures a lot..

Thanks :wink:

[bengbark]

Orange replicas bought here on YW, 15x7, 38 offset with TRD sportivo setup, stock goodyear tires (185/60R15) Mounted at Discount Tire...thoughts?

[why?]

looks good.

[Wisher23]

Motegi 7 spoke. 17x7. +40 offset. Tire size is 215/45/17.
http://i119.photobucket.com/albums/o158/wisher23/shot_1286576936867.jpg

[LA Yaris]

15" on stock tires

[evo165]

Latest update of my current wheel... Ray's Volk Racing CE28N 14" with Yokohama A-drive 185/65/14... :smile:

[Yar Is Word]

Forza 302 with red lip 15" x 6.5" Offset 38mm?
Hankook Optimo H727 185 x 60 x 15

[Tylermayer]

Forza 302 with red lip 15" x 6.5" Offset 38mm?
Hankook Optimo H727 185 x 60 x 15

to much tire need bigger rims but thats just me :))

[Yar Is Word]

The dealer showed me the Hankook book for that size tire. A 6.5" wide wheel was acceptible. That is the same size tire that was on the stock 5.5" steelies.

[Iggy888]

Enkei - RPF1 15x7 wheels (Offset: 41mm)
General Tire - UHP Summer tires 195/55 R15
TRD USA - Spring Kit

http://i1198.photobucket.com/albums/aa449/iggy888/DSC_0686.jpg

[Joel7302]

These are 17" Enkei wheels with 205/40/17 Yoko'shttp://www.yarisworld.com/forums/picture.php?albumid=554&pictureid=3383

[tmac61]

--BORBET CF 15x7 ET35
--Stock tires

http://i54.tinypic.com/1zn5t10.jpg

http://i56.tinypic.com/5vohsn.jpg

http://i53.tinypic.com/fwhj6r.jpg

[jmt282]

does anyone know the max lowering height after putting 17x7s on the 4dr ?

[kingbobby83]

MB Motoring 15x7 Viper wheels

Crappy cell pic...

http://img832.imageshack.us/img832/1156/newwheels.png (http://img832.imageshack.us/i/newwheels.png/)

Here is a little bit of a better pic...

http://img51.imageshack.us/img51/2354/dscn0591ny.jpg (http://img51.imageshack.us/i/dscn0591ny.jpg/)

http://img831.imageshack.us/img831/3861/dscn0593h.jpg (http://img831.imageshack.us/i/dscn0593h.jpg/)

[toad]

couple pics of the new wheels installed. enkei fd-05 15x7 +38 on yokohama avid touring-s 195/60/15. no rubbing, but i'm not lowered(i'll probably wait until spring because last winter i was plowing snow with my liftback on df210s).

close-up
http://i887.photobucket.com/albums/ac71/magnum_p_i/car1110007.jpg

side-view
http://i887.photobucket.com/albums/ac71/magnum_p_i/car1110006.jpg

[kimona]

^Those Enkei's look good wrapped in 195/60's.^

[toad]

^thanks! i wanted something 'meaty' that would fill the wheelwells without having to lower and not rub. also, i think the design of the wheels make them look bigger than they actually are(only 15s).

[.Kevin.]

Can I come in the club house fellas?

[benthiesing]

17s

[diegom261]

If i go with 225/35/18 which suspension do you recomend for a 2 door yaris 2008.

thanks, i just got the car and just registered here.

Thanks.

Twitter @DiegoM261

[.Kevin.]

17s not heavy on the yaris? You don't feel like you are sluggish in speed?

[RANDUMB]

After 2 years of putting it off I finally got new rims/tires.

I went with the MSW Type 11 rims (17x7, 37mm offset) and Yokohama ENVigor tires(205/45).

http://johnhirsch.me/downloads/misc/2010-12-05_12-37-32_248%20(1).jpg
http://johnhirsch.me/downloads/misc/msw_type11_mblk_1000.jpg

[33OH]

^ Love those.

[OTB]

Car is on Micro Image springs with 205/50R15 by the way.

Team Dynamics Pro Race 1.2 15x7 +40ET Anthracite:
http://i71.photobucket.com/albums/i134/casual540/Yaris/IMG_0744.jpg


TR Motorsports C1 15x7 +42ET Grey:
http://i71.photobucket.com/albums/i134/casual540/Yaris/IMG_0741.jpg

[solarVitz]

Ronal Teddy Bears 14x6 +38 offset...

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs786.ash1/167665_186982177979649_100000036052864_689424_1577 09_n.jpg

[MUSKOKA800]

Picked these up used and battered. But they're much prettier than the OEM 15" Alloys and sharpen the handling considerably. :thumbup:

[lanemeyer14]

Ronal Teddy Bears 14x6 +38 offset...

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs786.ash1/167665_186982177979649_100000036052864_689424_1577 09_n.jpg

Good stuff! Love the teddy bears

[YAR1S]

ahhhh! loving the teddys

[Manley81bass]

Wheels: Motegi SP10's 15X7 +42
Tires: BFG 185/60 15

[danielcassar]

my alloy wheels ;)

[CrzyCrg]

here we go...
lenso lightweight s2 17" with michelin 205/40's....

[yrisport]

Ive got those on mine, but with a 4inch drop :)

[CAyaris]

Stock springs no drop. 17" Motegi Racing Rims R7. 4x100. 215/40/17 tires.

http://i149.photobucket.com/albums/s54/s10bmx/NIGHTLIGHTRIMS.jpg