The Official Toyota Thailand Accessories Order Thread

[eTiMaGo]

We have many official accessories over here for the Yaris Liftback and Sedan, and I am more than willing to act as an agent for you guys so you can get all the cool stuff we have :biggrin:

Please be sure to read the following IMPORTANT INFORMATION first:

Compatibility

Interior: Our Yarii here are Right Hand Drive (RHD), while in the US, Canada and Europe they are Left Hand Drive (LHD). As a result some interior accessories like floormats may not fit properly in a LHD car.

Exterior: The difference between North American and Thai Liftback Yarii is the rear bumper. Due to stricter crash restictions, you have a deeper rear bumper, and as a result exterior accessories like rear mudguards or skirts will not fit. Sedans are not affected by this.

Paint: Exterior accessories are offered non-painted or pre-painted. I highly recommend you go for the non-painted items and get them painted there. Even if the paint codes match, there is no guarantee that the paints themselves will be identical. That being said, exterior accessories here are only offered in black and two shades of silver. The black should be a match to the LB's black in the US (color code 209), and the darker silver should be a match to the LB's Meteorite Metallic (color code 1F8). As I said, I cannot guarantee in any way that if you buy a pre-painted item, it will match your actual paint.

Shipping

To minimize shipping costs, we will do this along the group buy model. That is, I will take orders for a certain amount of time, and then all items will be joined in as few individual shipments as possible, as this reduces shipping costs. Then, for the members in North America, these packages will be sent to vodkalush, who will unpack your individual orders, and send them your way. For members in other areas, Europe, Australia, Central and South America, Middle East, I want to follow the same system, but because there are potentially less people, your shipping costs may be higher.

As we will not be able to calculate exact shipping costs per member until everything is shipped, I will take a 20% advance deposit from each order to out toward shipping. So, for example, if you buy a $100 item, I will bill you $120. Once your order has been reshipped, we will know exactly how much it has cost, and the remainder will be refunded to you. This way, I can work out the most cost-effective and fastest way to ship, based on this budget.

Ordering and Payment

To order, you can either send me a PM with what you'd like and your email address.

I'll then send you a Paypal invoice, and you can make the payment at your leisure, before the deadline.
If for some reason you cannot use Paypal (it's not supported in all countries), we can also use moneybookers.com , it's not as convenient but supports all countries.

I think this covers it all, sorry to be so long-winded, but it's better to lay out all the facts first :wink:

Now, onto the actual items:

http://www.etimago.com/yaris/accessories/yaris2.jpg
http://www.etimago.com/yaris/accessories/yaris3.jpg
http://www.etimago.com/yaris/accessories/yaris4.jpg

And for the sedan:

http://www.etimago.com/yaris/accessories/vios2.jpg

Many of the LB's interior accessories should also fit the sedan.

AFTERMARKET ACCESSORIES!

Good news! I have found a good supplier for aftermarket, non-Toyota accessories, such as:

LED side mirrors:
http://www.etimago.com/yaris/accessories/mirror1.jpg
http://www.etimago.com/yaris/accessories/mirror2.jpg
These are pre-painted, and can be had cheaper if we buy 10 sets or more.
$125 per pair (less than 10)
$110 per pair (10 or more)

Replica Modelista-style JDM LED lights:
http://www.yarisworld.com/forums/attachment.php?attachmentid=4617&d=1177463516
US$180 per pair

Black Tinted "Altezza" LED lights:
http://www.yarisworld.com/forums/attachment.php?attachmentid=4616&d=1177463516
US$190 per pair

Replica TRD gauge cover for the driver glovebox
http://www.etimago.com/yaris/accessories/gaugecluster.jpg
$85 (cover only)
$220 (with no-name gauges)

Replica Netz (lightning)Logos for front and back
http://www.etimago.com/yaris/accessories/logo-netz.gif
$35 (front)
$25 (back)

Replica Vitz and RS badges
http://www.etimago.com/yaris/accessories/vitzlogo.jpg
$15 (Vitz)
$35 (RS)

I think for this first round we'll set the ordering deadline to the end of the month (30th), and the payment deadline a week after that (7th of May). It should then take me about a week, maybe two, to get all the stuff, pack it properly, and ship it.

All right, let's get this thing started!

[uncleyaris]

I may not order but appreciate your efforts. I can only imagine the work and thought put into this. Vodka and yourself deserve a hugh ahead of time thanks, and I hope all the guys who were fishing around, will follow through for you!

[nebulight]

Do you think you can order the a-pillar that has the tweeter grill?

[eTiMaGo]

It's not available as a standard accessory, so I can't get it just yet. Maybe after this round of orders I'll have a bit more clout with the dealership and we'll be able to work something out with them.

[Nutzoids]

Rear View Mirror Turn Signal?

:evil:

[eTiMaGo]

same story, not an official accessory, still looking into a good price for good quality aftermarket ones :wink:

[Nutzoids]

Alright Last question... You might not know... but,

The size and Location of the Center Consol...

I drive a Manual Yaris with TWM Short Shifter... and I need my Center Consol to be at just the right level for me to put my Elbow on it and shift...

I know with the US factory "Arm rest" is way too high to shift...

What is the Center Consol like? Does it fit well?

:evil:

[eTiMaGo]

I used to have it on before I changed my seats. I'm not a very tall guy, but I found it to be too low to function effectively as an armrest, it's really just meant to be a storage compartment. :smile:

[Nutzoids]

Urgh...

Alright In that case I will take a Spolier... Colored... Black!

:evil:

[eTiMaGo]

all right :smile:

Shall I use your same paypal details as last time?

[Nutzoids]

Sounds Good to me...

The 1616 Address!

Thanks Thomas

:evil:

[Kaotic Lazagna]

hey Thomas, what about the spoiler for the sedan in the closest color to flint mica? and one more question, it shouldn't be too hard to install, right?

[eTiMaGo]

The closest color would be black, but it's really up to you if you want it to be mis-matched, or get it painted when you receive it.

Installation of the sedan spoiler will probably require you to drill some holes in your trunk, so it's not for the faint-hearted unless you get some help :wink:

[tk-421]

does that apply to the LB spoiler as well? I have a 5dr LB version, in case that makes any difference...

[eTiMaGo]

Yes, if you do not already have a mini spoiler there, you will need to make holes for the new one to attach.

[tk-421]

Ah well... :iono:

All good things should require some amount of effort.

I believe I am in for a nice Thai spoiler. Now I just want to be 100% sure on the color issue. I drive a MetMet Yaris, although I'm seriously considering getting a black wing, since I'm thinking it could look pretty sick with the smoked tails that I'm about to put in place of the stock ones, as well as the black 17's that will find their way into my car in a couple of months.

Suggestions, anybody?

Also, I'd like to know how much it would be for shipping to Mexico City, which I suspect should be quite a bit more than my friends above the border. :drinking:

[eTiMaGo]

Though I suppose you could epoxy or superglue the wing on if you're lazy and don't mind it falling off when you are driving :biggrin:

Meteorite metallic's paint code is a match to the medium silver we have here, but as I mentioned earlier, I can't guarantee the paint itself would be an exact match.

But, going with a black spoiler could be cool!

For the shipping, I'm pretty sure it would be cheaper to go through the US than me shipping straight to you. Of course, it would be best if you could find other people there to order stuff, then the shipping can be split.

[Kaotic Lazagna]

exactly how hard is drilling through the trunk? and would i need to paint the holes to prevent rusting?

[tk-421]

Though I suppose you could epoxy or superglue the wing on if you're lazy and don't mind it falling off when you are driving :biggrin:

Oh, the sarcasm! :bellyroll:


Meteorite metallic's paint code is a match to the medium silver we have here, but as I mentioned earlier, I can't guarantee the paint itself would be an exact match.
I guess I'll get it unpainted from you if I don't go for the black... Thx for the heads up!


But, going with a black spoiler could be cool!
Means a lot from a guy w/such a nice car... :respekt:Still, I'm still not sure about it. I guess I just don't want the smoked tails to stand out too much. The other option could be to just go with some faded dark gray vinyls or something...


For the shipping, I'm pretty sure it would be cheaper to go through the US than me shipping straight to you. Of course, it would be best if you could find other people there to order stuff, then the shipping can be split.Unfortunately (or maybe not), there's not a lot of people over here with the Yaris yet, so things like meets and such are out of the question for now. Don't worry, though... I'm kinda used to the shipping costs by now, and I'll be ready to shell out the $$$ when the time comes. Thx again!

[vodkalush]

Come-on people; place some orders :smile:

[Kaotic Lazagna]

Come-on people; place some orders :smile:

i want that sedan spoiler, just waiting for Etimago to send me info to place the order.

[eTiMaGo]

hahaha and here I was waiting for you to PM me your info :biggrin:

PM coming your way

[yarisuzr]

I made a list of items I wanted in the original post, could you pm me with a total price. I wanted the following items: # 3, 5 and 8 under interior accessories. Thanks

[Venom]

I want the sedan spoiler. I have a black sand yaris, so I assume the black would be a pretty good match?

[eTiMaGo]

if your paint code is 209, it should be a match. But like I mentioned at first, I can't guarantee the paint will be an exact match between our countries, but it should be close enough.

[Kaotic Lazagna]

paid ya Thomas. :thumbsup:

ignore my question about shipping, i re-read the first page.

[Kaotic Lazagna]

now, time to save more money to get that Thai spoiler painted.

[jaspie]

eTiMaGo.....

Give me a few months ~ Let me save up some money ~ Then I'll be buying ~

These are in US dollars right?

I'm not wanting to get the exteriors.....I want interiors.....

Like the cushion (I like it.....seriously....I do ~) and the front window visor/protector (I've been looking for one for ages)

But yea.....give me a few months to save up and I'll tell you exactly what I want and buy them at the same time ~

Thanks ~

Jaspie ~

[eTiMaGo]

Hey jaspie,

Sure, it should not make much a difference, it doesn't look like too many australians interested :iono:

Yes, prices are in in US dollars.

I got the window sunshade myself a couple of days ago, so much better now when I don't burn my hands on the steering wheel and gear knob on a sunny day! :biggrin:

[jaspie]

Hey jaspie,

Sure, it should not make much a difference, it doesn't look like too many australians interested :iono:

Yes, prices are in in US dollars.

I got the window sunshade myself a couple of days ago, so much better now when I don't burn my hands on the steering wheel and gear knob on a sunny day! :biggrin:

Ok.....just making sure.....so this doesn't "suddenly" stop and I miss out on buying ~

Yea....window sunshade is good for me.....since it's SUNNY nearly everday in Australia ~

Jaspie ~

[Venom]

OK, well I want the spoiler unpainted.

[Slummy]

I'm curious as to what #5 is in the Be Complete section is?

[eTiMaGo]

I'm curious as to what #5 is in the Be Complete section is?

It looks like some kind of a device that goes around the posts of your headrest, with a hook on which you can, well, hook things.

Only three days left till we close this round of ordering! Time to decide!

[KSIbucky]

i want the painted spoiler

[nick1983]

I want the foglights for the sedan.

[Unknown_Epiphany]

Unfortunately, I will have to sit this round out. I just got engaged and am trying to pay off the Yaris before I do anything to it. Thanks for all of the dedication and time you have shown eTiMaGo. I am sure many YW people agree with how dedictaed you have been.

[uncleyaris]

x 2

[Kaotic Lazagna]

oui, merci beaucoup Etimago.

[eTiMaGo]

Guys! (and gals!)

I just found today a good supplier of plenty of aftermarket and replica parts, I've added information to the bottom of the first post of this thread!

[hasher22]

Can u get that aftermarker altezza tail lights? Im really interested in the product though the website in some non-english txt.

The ones with the moon shaped lights to it..

http://www.autoplusshop.com/image.php?filename=00289_1&size=180

[eTiMaGo]

I have not found those ones for sale, but I'll be going back to that shop early next week, maybe they can help source them.

[tk-421]

Since you'll be looking for tails, could you also see if these could be available?
http://www.yarisworld.com/forums/attachment.php?attachmentid=4615&d=1177463516

[Violin]

Just to let you know, I PM'ed you about those LED mirror covers. If for some reason you don't get it, let me know so I can get in on this.

You're the man, man.

[eco]

etimago,Im guessing that somthing like the iluminated ignition would also fit the US sedan.I plan on buying a couple hundred dollars worth of stuff.

[uncleyaris]

Great find on the LED covers, is Bayou Blue available, or only colours local to your market?

[eTiMaGo]

Only local colors :frown:

But, I don't know if this shop gets them from their suppliers pre-painted, maybe I can get them to do a custom paint, I'll ask when I'm there again early next week.

Also, because I've added this stuff pretty late, I'll give another week for ordering and payment, for the benefit of those who don't spend their lives on this forum :biggrin:

[Nutzoids]

because I've added this stuff pretty late, I'll give another week for ordering and payment, for the benefit of those who don't spend their lives on this forum :biggrin:

Why would someone not spend their lives on this Forum?

:evil:

[eTiMaGo]

no idea... I heard a rumor they might have some weird thing called "a life", but that's really a novel concept to me...

[spkrman]

Why would someone not spend their lives on this Forum?

:evil:

wtf, there is more than this forum?

[uncleyaris]

[QUOTE=eTiMaGo;80222]Only local colors :frown:

But, I don't know if this shop gets them from their suppliers pre-painted, maybe I can get them to do a custom paint, I'll ask when I'm there again early next week.

Thanks, let me know. :w00t:

Again thanks for all your work.

[uncleyaris]

Just found a post about how to install and realize in SOL. I don't have they same type of mirrors like other hatches. Mine are black and are not matched to the cars colour. Serves me right for buying the CE model.

[eTiMaGo]

you mean your mirror cover is one big solid piece of plastic? that sucks... maybe you can buy the "normal" ones of your toyota dealer somehow?

[OxyG3nE]

uncleyaris i think i have the same thing as you ... so its not possible to get this miror cover? :(

[uncleyaris]

I think I spoke to soon. I took another look and the black plastic is simply the same as those that are painted, but just black plastic. I gonna go look a some yaris' on the lot by my house to confirm.

[OxyG3nE]

i looked mine and there 2 clip to pop it out.. take a second to remove the black cover

[tk-421]

eTiMaGo: Getting ready to order... Just need to know a few things:
Have you seen any differences between the replica Modellista clear tails and the real deal as far as you can tell?
Could I get the LED side mirrors unpainted in case the paint codes don't match 100%? (I have MetMet color BTW)
How much would shipping to Mexico City for each of the following items cost?
Modellista tail lights
LED side mirrors
Rear bumper stepguard
Muffler cutter (stylish)
Manual pedal set Thanks again for doing this man... I promise to buy you as much tequila as you want if/when you come on over to my side of the pond. :drinking:

[uncleyaris]

i looked mine and there 2 clip to pop it out.. take a second to remove the black cover

thanks for the confirm.
:thumbsup:

[OxyG3nE]

turn the miror and you should see the clip inside of it :p

[uncleyaris]

eTiMaGo, can you find out if the LED mirrors , unpainted are just black plastic, cause I may take them that way. Thanks

[OxyG3nE]

i want the led mirror but i have no idea how to wire it...

[eTiMaGo]

The mirrors are only available painted, so you could always get the black painted ones?

As for wiring, it would just be a matter of fishing the wires down the front quarterpanel and splicing them with the side blinker's cabling, which is probably easier said than done. I'll get a pair myself, and will video the shop dude installing them :wink:

[eTiMaGo]

eTiMaGo: Getting ready to order... Just need to know a few things:
Have you seen any differences between the replica Modellista clear tails and the real deal as far as you can tell? - The silver side part is chrome on the replicas, but has more of a brushed look on the originals
Could I get the LED side mirrors unpainted in case the paint codes don't match 100%? (I have MetMet color BTW) - They only come painted, but as there's no direct contact between painted parts, any small difference should not be noticeable
How much would shipping to Mexico City for each of the following items cost?
Modellista tail lights
LED side mirrors
Rear bumper stepguard
Muffler cutter (stylish)
Manual pedal set
I'll still take a 20% deposit for the shipping, but since there's quite a few items which I think can fit in a modest-sized box, it should be more than enough to cover the actual shipping cost, so I'll refund you the difference.

Thanks again for doing this man... I promise to buy you as much tequila as you want if/when you come on over to my side of the pond. :drinking:

ooh la la tequila *dances*

[vodkalush]

What colors are availble for the LED mirrors?
just the following: Black, Dar Silver, Light Silver??

[eTiMaGo]

As well as blazing blue, white, red, basically all the local Yaris colors.

[vodkalush]

Sweetness.

Count me in for the LED covers :)

pming now

[tk-421]

Alright, I'm in. I guess I can live with more of a chrome-y look as far as the tails go... If not, I can always paint/trade/sell 'em over here... I just hope they look as close to these as possible (BTW: Mucho :respekt:to Violin (http://www.yarisworld.com/forums/funkygarage.php?do=garage&id=937) on his ride! You've got great taste, bro!):

http://www.yarisworld.com/forums/images/funkygarage/25/photo015%20Medium.jpg

But I digress. I've just PM'ed you with my details, eTiMaGo. :thumbup:

[tk-421]

One more question: Do the tail lights come with the molex connectors already, or is there some cable splicing involved?

[eTiMaGo]

some splicing/connector moving will most likely be required, even the stock wiring here is different from yours...

[tk-421]

some splicing/connector moving will most likely be required, even the stock wiring here is different from yours...

Actually, I have a 5 door (Vitz-like) version... We don't get the 3-door like in the US (you can check my garage for confirmation). Do you still think this will be a problem for us mexicanos? :help:

[OxyG3nE]

if the mirror cover fit this:
http://i107.photobucket.com/albums/m292/OxyG3nE/IMG_0914.jpg

i want one !!

[tk-421]

if the mirror cover fit this:
http://i107.photobucket.com/albums/m292/OxyG3nE/IMG_0914.jpg

i want one !!


I need to be sure of this as well, since I have the same fugly plastic covers at the moment...

[eTiMaGo]

it looks similar, but it you could show a picture with an angle from the bottom, to see how the two pieces come together?

[OxyG3nE]

http://i107.photobucket.com/albums/m292/OxyG3nE/IMG_0914.jpg

http://i107.photobucket.com/albums/m292/OxyG3nE/IMG_0915.jpg

http://i107.photobucket.com/albums/m292/OxyG3nE/IMG_0916.jpg

[eTiMaGo]

you guys are in luck, looks like a match :smile:

[blacksan]

Pheck, did I miss out on exhaust tip order?

[eTiMaGo]

I've extended the ordering by an extra week, so you can still get in on this!

PS your avatar made me crack up :laugh:

[R0ME0]

Sweet ness! Any updates on the TRD replica gauge cluster with more pics and how itmounts as well as more info on the "HKS" tach? Also does the Sakura Mirror covers come in Blazing Blue Metallic 8T0? If so put me down for a set! Thanks again Tim!

[eTiMaGo]

Tim? Who's that? Tim the enchanter? :biggrin:

No updates yet, first of the month, craziest workload day for me, plus I'm still recovering from a cold :frown: Tomorrow probably!

[vodkalush]

Tim? Who's that? Tim the enchanter? :biggrin:

.......

:laughabove: :laughabove: :laughabove: GAAAHHHH hahaha

[eTiMaGo]

world's best geek trap: quote some Monty Python and watch the reactions. :biggrin:

[vodkalush]

I just saw SpamAlot last week....

[tk-421]

I've extended the ordering by an extra week, so you can still get in on this!

Does that mean that you'll be extending payments for a week as well?

[eTiMaGo]

yes of course, until the 14th.

[R0ME0]

Tim? Who's that? Tim the enchanter? :biggrin:

No updates yet, first of the month, craziest workload day for me, plus I'm still recovering from a cold :frown: Tomorrow probably!

Oops my bad! I now officially dub you Tom the Enchanter! :biggrin:

[OxyG3nE]

hey etimago its possible to have the mirror cover pre painted blazing blue metallic 8T0 code is it more expensive? and i like also to know if its possible to ship with normal post not ups or fedex...

[Violin]

I think the only colors they come in are
1. Platinum Metallic ( 1DO )
2. Black Mica ( 209 )
3. Mercury Silver ( 1F8 )
4. Aqua Blue ( 8S9 )
5. Pacific Blue ( 8N8 )
6. Tropical Orange ( 4S3 )
7. Alpha Red ( 3PO )

[eTiMaGo]

Yeah the non-standard colors are going to be a problem, I've done some checking up on this, I'd basically have to buy 100 sets of each for them to custom paint them from the factory. So, I could get the shop where I'm buying them to paint them, as they also do some fiberglass bodywork, but once again, a lot of the "made in japan" Yarii's paint codes are just not available here, and I do not think the workshop would be able to make a good match if they don't have a reference.

So, I've made this little chart to help you identify the available colors, and what would be a closest match to your color:

http://www.etimago.com/yaris/accessories/mirrorcolorchart.gif

The paint codes in BOLD are an exact match, and I've put what would be the closest match for some other colors. The closest match colors may look good, they may look mis-matched, there's no way to know right now. If you have one of those mis-matched colors, you should try to get the closest one, and if it does not look good, I guess your best choice would be to have them re-painted locally.

Or, you could try for the black or light silver ones for a bit of contrast, but that's really up to you:

http://www.etimago.com/yaris/accessories/bayoublack.jpg

http://www.etimago.com/yaris/accessories/blazingsilver.jpg

As for shipping, basically what I will use will depend on the shipping budget I've collected (the 20% I am charging, basically). If that si enough to cover express shipping, then express shipping will be used, if not, I will need to use a slower, cheaper method.

[OxyG3nE]

okidoki thanks for all the info :) ill sleep on this and decide tomorow what i do :p

EDIT i just looked picture of the pacific blue and it wont match at all the Blazing blue metallic.. so i have no idea what to do.. black? no thanks i wanted mine colored :S but i dont know if i should wait to have like a body kit to get paint and make paint everything together..

[uncleyaris]

eTiMaGo, thanks for the pic of the Bayou Blue, After seeing I'll have to pass; just doesn't look right! I'll peek some more at the other goodies, and I appreciate your efforts to help us over here in US/CAN...

[eTiMaGo]

All right, no problem, it would probably be more worth it for you to get several pieces painted at once, so save up and buy that spoiler you've always wanted :biggrin:

[uncleyaris]

I agree, Those LED mirrors would have looked so good, I love the Bayou, but it can be a bitch in cases like this! Thanks again.

[eTiMaGo]

see? you should have picked a real man's color, like bright red! :laugh:

[uncleyaris]

ouch!!!!!!! they're all great colours, just like how the Bayou looks different depending on the light it gets

[laszlo]

will you take a money order for the trd cagepod thanks laszlo

[eTiMaGo]

if by Money Order you mean Paypal, then yes :wink:

[laszlo]

sorry dont have a pay pal i mean a bank money order.
thanks laszlo

[eTiMaGo]

Uh it's pretty difficult for me to cash those over here, I suppose you could go to your bank and ask them to do a telegraphic transfer to my bank account.

but seriously, you should look into opening a paypal account, it's an incredibly useful service.

[eTiMaGo]

for those of you who have not yet done so, only three days left to confirm your orders!

[Kaotic Lazagna]

keep on buying, people, that way the shipping charges will get lower.

[OxyG3nE]

if it was prepainted my color i would buy it :p

[uncleyaris]

if it was prepainted my color i would buy it :p

X 2:frown:

[paradigm]

I would buy a prepainted white spoiler in a heartbeat.

[R0ME0]

Thomas any update on the cluster on how it mounts and the possibly more pix? Also the price of the Tach?

[blacksan]

I am still trying to figure out if the single, or duel outlet exhaust tip would look better on my LB?

[eTiMaGo]

Thomas any update on the cluster on how it mounts and the possibly more pix? Also the price of the Tach?

I don't have any more pictures, but the cluster can be screwed in place, through the back of the driver side glove box door. As for the included tach and gauges, they're really some cheapie ones, I would not recommend them. I could not get a size of the gauge mounting holes but will confir once I pick up the goods from the shop.

I am still trying to figure out if the single, or duel outlet exhaust tip would look better on my LB?

Personally I'd say go with the single one, the dual tip just looks kinda out of place in my opinion. Look up Razr's ride in the YarisGarage, he has the dual tip ones, it should give you a better idea.

[blacksan]

Personally I'd say go with the single one, the dual tip just looks kinda out of place in my opinion. Look up Razr's ride in the YarisGarage, he has the dual tip ones, it should give you a better idea.

The single tip it is. Ok, straight, or tapper?

BTW, I was still want one of the small white stickers. Are they ready?

[eTiMaGo]

It's a straight muffler tip :)

As for a sticker, no problem, it can be added to the order, I have the single-color ones in stock

[blacksan]

It's a straight muffler tip :)

As for a sticker, no problem, it can be added to the order, I have the single-color ones in stock

PM on the way.

#1 straight muffler tip, please.
#1 small white sticker, please.

Adrian aka blacksan

[uncleyaris]

I am still trying to figure out if the single, or duel outlet exhaust tip would look better on my LB?

Get the tail Lights JDM reps !!!!!!!:thumbsup:

[eTiMaGo]

last 24 hours to place orders, guys!

[hasher22]

Payment Sent....YAY

[Nutzoids]

Paid and Paid...

:evil:

[eTiMaGo]

impressive... most impressive...

:biggrin:

[blacksan]

What kind of hassle is it to get all that stuff past customs in Thailand?

[eTiMaGo]

customs IN thailand should not be a problem. Customs once it arrives in the US will be a different story, but my buddy vodkalush will be taking care of that, there should not be any problems.

[R0ME0]

One last question is about the pedals for the Liftback. Will it be an issue to fit on our LHD cars? And are they full replacements or are they just covers?

[eTiMaGo]

One last question is about the pedals for the Liftback. Will it be an issue to fit on our LHD cars? And are they full replacements or are they just covers?

from the pictures I have seen, they are exactly the same. I believe they are just clip on covers, though

[tk-421]

customs IN thailand should not be a problem. Customs once it arrives in the US will be a different story, but my buddy vodkalush will be taking care of that, there should not be any problems.

What about the lonely mexican dude?
Is there any paperwork that I should be worrying about? :confused:

[eTiMaGo]

What about the lonely mexican dude?
Is there any paperwork that I should be worrying about? :confused:

There shouldn't be... I'll be sending an official invoice with your package, with the cost of the goods undervalued of course, so you should just need to pay whatever taxes are added to the delivery guy.

[eTiMaGo]

oh and remember guys, today is the deadline for placing your orders, but you still have till the 15th to make the payment.

If you want to order and have not yet received a Paypal invoice from me, you need to PM me your email address!

[turboyaris]

hey etimago i sent you a pm about the kit and no side skirts, would that cut shipping alot? thanks for the help, let me know i can scrap the money together as soon as you need it if it happens to go past the deadline, or whatever.

[R0ME0]

Thomas just sent you my order! Please change my mirror covers to black please. Thanks!

[eTiMaGo]

hey etimago i sent you a pm about the kit and no side skirts, would that cut shipping alot? thanks for the help, let me know i can scrap the money together as soon as you need it if it happens to go past the deadline, or whatever.

I didn't get back to you on this yet, but because of the size of the lips and skirts, I don't think i'll be able to include it with this shipment, it would have to be sent separately no matter what :frown:

[turboyaris]

i gotcha well in your free time if you could check a shipping quote for me however by air or sea whatever, and see if there is a big difference with or without the side skirts.

[eTiMaGo]

aye aye sir... :wink:

[eijikikimaru]

Does anyone know if the exhaust for the sedan is just a tip?

If so would that also fit on the Liftback w/o welding and stuff?

[eTiMaGo]

I don't see why it would not fit on the liftback, the tips are attached by screws. Although, I am not 100% sure, but I think the sedan tip has "VIOS" engraved on the top (The Yaris one says TOYOTA)

[tk-421]

http://i206.photobucket.com/albums/bb182/bionic_seahorse/receipt.gif

[eTiMaGo]

just waiting on payment from one more person, you know who you are :wink:

[Blenjar]

Im thinking fast..hold on!!!

-- Blen

[blacksan]

Im thinking fast..hold on!!!

-- Blen

Pay da man, or wake up with a rusty muffler in yer bed, kapesh!:biggrin:

[Blenjar]

hahaha wait nm...i dont like to rush on spending money..

Good news is if I buy anthing I can pick it up myself in rochester..if that is where vodka lives...

**im not hte one hes waiting to pay**
grrr damn spoiler...i wish I had a sedan...just for that spoiler..

-- Blen

[Blenjar]

ahhh fuk it...

Hey I'll hit u up. get on msn real quick.

I want RS spoiler for Yaris. unpainted tho unless you think the black can really match the 209.

What's ur email again for paypal?
I still dont have my yarisworld sticker :'(
n is it all going to vodka? i can pick mine up =D
I hope I get free installation from vodka <3

-- Blen

[blacksan]

hahaha wait nm...i dont like to rush on spending money..

Good news is if I buy anthing I can pick it up myself in rochester..if that is where vodka lives...

**im not hte one hes waiting to pay**
grrr damn spoiler...i wish I had a sedan...just for that spoiler..

-- Blen

I hate spending money too, but then I realize that i have only one shot at this life thing which eases my pain. What good is it (money) when I am so old that not peeing in my pants is a good day? :biggrin:

[Blenjar]

Okay okay..

Black RS Spoiler (HB)
I'll fax u up etimago. 150 + 20% rite?
sum1 correct me if im wrong.

-- Blen

[tk-421]

What good is it (money) when I am so old that not peeing in my pants is a good day? :biggrin:

Dude, now you can pee in your pants and have a good day at the same time! :thumbup:


http://www.theincontinencestore.com/members/999468/uploaded/Protect_UW_refast_bag.jpg

[blacksan]

Dude, now you can pee in your pants and have a good day at the same time!


http://www.theincontinencestore.com/members/999468/uploaded/Protect_UW_refast_bag.jpg

I do that now, It just takes a little quality bourbon to lose my inhibitions!:thumbsup:

[Blenjar]

I dunno, fax me up buddy

Blenjarebay@gmail.com

-- Blen

[Blenjar]

**Yawns...if its 2 late..its k...im just get rally spoiler or sumthin

boo me
*goes to bed*

-- Blen

[eTiMaGo]

better late than never, if you can get the payment sent before the 15th, then no problem!

[Blenjar]

Okay I sent payment <3
Hey what about my yaris sticker...did you send it yet?
nd how long will shipment be?
ALso can I pick it up at vodka?

-- Blen

[eTiMaGo]

yup, got the payment...
Sticker's been sent too, about a week ago now. it ought to be there real soon now.
We'll have to check with vodkalush if that's OK with him :wink:

[Blenjar]

Roger that. thx

Cause rochester is like wat? a hr from me?
Shipping it to me is worthless waste of time...
And he will install it for me ;)
Drilling involve in spoiler, right?

-- Blen

[ROCKLAND TOYOTA]

besides the yarisworld sticker what else can you get your hands on???? trd,tom's,????? can you take some pictures if possible.....

[ceres]

Roger that. thx

Cause rochester is like wat? a hr from me?
Shipping it to me is worthless waste of time...
And he will install it for me ;)
Drilling involve in spoiler, right?

-- Blen

Depending where you are in CT, Rochester is likely at least a 5 hr drive. It's 3 1/2 hrs from Albany to Rochester.

[Blenjar]

Thx for bringing that u;...its actually 6 hrs drive but hey...

its summer time and I haven't really taken any trips and might be able to see a buddy in syracuse or w/e town...so here I come rochester...

-- Blen

[Blenjar]

I got my yaris sticker btw..came in today..

-- Blen

[vodkalush]

hahaha, kick ass man. Let me know a date and time... so i can be sure to be sober...:drinking:

[Blenjar]

lmao

-- Blen

[eTiMaGo]

All right guys, it's time to officially close this round.
What will happen now, I will withdraw the total for these orders from my paypal account, and once I receive it (3-4 days), I'll head right over to the Toyota dealership and the accessories shop (they want the money up front...), and place the orders, which should hopefully be this Friday.

From then, it should take about 5 days for them to get all the stuff, so I ought to have it all in hand by Wednesday 23rd. Give me a few days to get everything packed up and it should be shipped out of Bangkok on Friday 25th at the latest.

I'll know the exact shipping costs later when I have all the boxes to measure and weigh, but there should be enough in the shipping budget to use one of DHL's slower shipping methods, so we may be looking at 2 weeks shipping time until it all gets to vodkalush, but I'll confirm that later. Then, he'll just have to unpack my boxes and saunter over to the post office to re-ship them :wink:

And, as of this day, we start round 2 of orders, I'm hoping we can do one round per month, what do you all think?

[Kaotic Lazagna]

thanks etimago!

[uncleyaris]

sounds great, finding those tails was great to bad I already bought from a sponsor. Any other goodies you can get? I'll be checking. Maybe I can be the future with a Canadian order?

[eTiMaGo]

well I'll be looking to see what other cool stuff I can find :smile:

[hasher22]

Are u able to find a red Grounding kit + a Voltage Stabilizer over there?? Must be red! :( australia has nothing.....i tried looking in about 10 diff places....

arrrrg

[eTiMaGo]

Uh I think so, I've seen blue ones and green ones, I'll check on red too :wink:

[tca4]

Hey Eimago are there does the burnout kit fits our yaris?? and would you be able to source it? this one im talking about
>>http://www.vittautowheel.com/YARIS/Burnout/DSCF0204.jpg

But i saw on the offical Burnout site, they only came up with a lip kit for it, so does this mean the Vitt burnout kit is only for thailand?

[eTiMaGo]

Actually, from what I understood of burnout's website, they have either a lower lip for the RS front bumper, or the full front bumper replacement like that black car. The ones that VITT sells looks to be a replica... So I could get them cheap, but shipping will be a b*tch...

As for fitting it onto a USDM Yaris, it may or may not work. Due to the thicker impact protection bar thingies in the bumper, you may need to grind down or cut away some inner parts of the new bumper, I know this was the case with the members here who put in the C-ONE bumpers, and if you look into the first issue of Siphon magazine, they also mentioned that in one article.

So, if anyone wants to be a guinea pig and does not mind pretty high freight charges, I could look into this, and other replica body parts available here.

[R0ME0]

Thomas,

What kinda exhaust is this? Really lovin it!

http://www.vittautowheel.com/YARIS-LINEUP/Y-BURNOUT/DSCF8767.jpg

[blacksan]

Thomas,

What kinda exhaust is this? Really lovin it!

http://www.vittautowheel.com/YARIS-LINEUP/Y-BURNOUT/DSCF8767.jpg

I stumbled across the Japanese (Toyota Domestic) accessories web page last night and it had a couple of factory exhaust for the Yaris that looked like that.

[tca4]

I wodner how much the shipping will costs but too bad i have already a Japanese bumper but i like the burnout bumper a lot more Etimago how much do you think it will cost to ship here (Canada V4E 3C1) including the replcia bumper

[ROCKLAND TOYOTA]

i asked before but maybe you didn't see. CAN YOU GET TRD EMBLEMS/STICKERS?????

[eTiMaGo]

I wodner how much the shipping will costs but too bad i have already a Japanese bumper but i like the burnout bumper a lot more Etimago how much do you think it will cost to ship here (Canada V4E 3C1) including the replcia bumper

I'm still figuring this out, it won't be cheap, and it won't be fast, but it should be feasible.

i asked before but maybe you didn't see. CAN YOU GET TRD EMBLEMS/STICKERS?????

I can get real or replica ones, sure :smile:

Thomas,

What kinda exhaust is this? Really lovin it!



I'm not sure, I've seen it before, but I can't quite find confirmation now :tongue:

[ROCKLAND TOYOTA]

do you need part numbers or pictures to be sure.......

[eTiMaGo]

do you need part numbers or pictures to be sure.......

I'll find out what's available, take some pictures, and post them here with pricing :smile:

[Jerkratt]

i would like some trd emblems/decales

[eddiegarton]

Does the full decorative skirt fit the sedan? If yes, can it be painted pacific blue metallic?

[eTiMaGo]

Does the full decorative skirt fit the sedan? If yes, can it be painted pacific blue metallic?

I strongly doubt it will fit... And I cannot get it painted that color over here :frown:

[eTiMaGo]

Also, things are getting a bit delayed, the withdrawal from my Paypal account has not yet reached my bank account, it's been over a week, so it should come in the next couple of days... :frown:

[Kaotic Lazagna]

it's all good Thomas. no rush.

[eTiMaGo]

All right kids, withdrawal came in this morning, so it's shopping time! Just gotta clear up some work and I'm off to the ATM, then the dealership :biggrin:

[Blenjar]

hurry!!! OMFG I SMELL MY SPOILER!

can u send some thailand porn movies with my pkg?

-- Blen

[eTiMaGo]

hurry!!! OMFG I SMELL MY SPOILER!

can u send some thailand porn movies with my pkg?

-- Blen

Porn's illegal here! And it's one of the only illegal things that are really enforced... Strange, isn't it?

[Black Yaris]

Porn's illegal here! And it's one of the only illegal things that are really enforced... Strange, isn't it?

then send him 10 pound of dope :thumbsup:

[Black Yaris]

Hey I am finally alound to get a spoilier as well... wish I could have gotten it on your GB Thomas, but the wife stalled too long... so I am going to have to get it from critical88 on ebay and spend a lil more.... I will tell her that is what happens when you wait!

[eTiMaGo]

Hey this isn't a one-time thing, I'm more than willing to do more group buys!!!

[tk-421]

Great news! Hope to see pics soon!

[Black Yaris]

well from this we will better know shipping rates....

[Kaotic Lazagna]

heh, shopping spree for Thomas.

[eTiMaGo]

Mini Update, everything is ordered at the Toyota dealership, should take no more than a week to be all ready. The sales girl I dealt with was quite surprised that there were so many Yaris owners in other countries :biggrin: She was kinda cute too :wub:

As for the aftermarket stuff, didn't get to go, it's pretty far away, it was raining quite heavily so that means mega traffic jams, and I just didn't have the time today. So most likely tomorrow!

[blacksan]

Mini Update, everything is ordered at the Toyota dealership, should take no more than a week to be all ready. The sales girl I dealt with was quite surprised that there were so many Yaris owners in other countries :biggrin: She was kinda cute too :wub:

As for the aftermarket stuff, didn't get to go, it's pretty far away, it was raining quite heavily so that means mega traffic jams, and I just didn't have the time today. So most likely tomorrow!

Woooot! Now, when you package the sales girl make shore and punch some holes in the box for air.:biggrin:

[Nutzoids]

You know... This might sound bad but...
What does a cute Thailand chick look like?

I don't think I have ever met someone from Thailand... In person that is!

Who's got a picture for me!

:evil:

[eTiMaGo]

hey hey now that's one accessory that should go in my car :smile:

[eTiMaGo]

You know... This might sound bad but...
What does a cute Thailand chick look like?

I don't think I have ever met someone from Thailand... In person that is!

Who's got a picture for me!

:evil:

Erm there's all kinds of looks of Thai people, it's quite a diverse country in that respect! I'll ask her if she can pose with your spoiler :biggrin:

[Nutzoids]

Erm there's all kinds of looks of Thai people, it's quite a diverse country in that respect! I'll ask her if she can pose with your spoiler :biggrin:

My man:clap: Now that's service:bow: With a smile!:biggrin:

:evil:

[Jerkratt]

Hey I am finally alound to get a spoilier as well... wish I could have gotten it on your GB Thomas, but the wife stalled too long... so I am going to have to get it from critical88 on ebay and spend a lil more.... I will tell her that is what happens when you wait!

i bought a VVT-I emblem off him and still have not recived it.....

[Black Yaris]

i bought a VVT-I emblem off him and still have not recived it.....

I have bought from him b4, and so have some others from here... just drop him a mail and ask him what is up.... it does seem smaller packages take a bit longer from over seas cause they "get lost" since they are so small... I think the badge I ordered took a month, but I figured that from anywhere in Asia

[Shroomster]

Black Tinted "Altezza" LED lights:
http://www.yarisworld.com/forums/attachment.php?attachmentid=4616&d=1177463516
US$190 per pair


Replica Netz (lightning)Logos for front and back
http://www.etimago.com/yaris/accessories/logo-netz.gif
$35 (front)
$25 (back)


$35 (RS)



1st. are these replica l.e.d tails compatible with the wiring for the U.S? (plug them in and go?)

and what, if any of this, can you get the real instead of replicas and what is the price for the real, O.e.m?

[hasher22]

OOOOOOOOOOO hows the 1st batch of orders going!!???? i waaant my netz rear logooooo :) :) :) pew pew

[eTiMaGo]

1st. are these replica l.e.d tails compatible with the wiring for the U.S? (plug them in and go?)

and what, if any of this, can you get the real instead of replicas and what is the price for the real, O.e.m?

The wiring is different between USDM and our models, so most likely some rewiring will be needed.

As for the original JDM RS tails, I can get those too, but more expsnive than other sponsors here are offering, so it's not really worth it for you guys!

Anyway, should have all the stuff around the middle of next week :smile:

[ChinoCharles]

Ordered a set of Modellista knockoffs. They're going to look awesome smoked. Thanks Thomas, you're a saint!

[eTiMaGo]

Saint Thomas, only believed what he saw with his own eyes, right? Then I'll have to fly over to Ohio to check the awesomeness of those smoked tails, won't I? :laugh:

[ChinoCharles]

If you ever do come to America, bring that pocket rocket with you. I want to see it. Should fit in a suitcase. Oh, and prepare to drink. :drinking:

[eTiMaGo]

I'm so tempted to take a month off and go across the US and Canada, YW member to YW member :biggrin: That would be one heck of a road trip!

[Violin]

You could help us install our parts!

I'll even throw in a few Brooklyn Lagers.

[ChinoCharles]

Do it Thomas!

[Shroomster]

Ordered a set of Modellista knockoffs. They're going to look awesome smoked. Thanks Thomas, you're a saint!

p/m me when you get them or post on here a D.I.Y on the wiring PLEASE!!!!!!

[tacsnier]

ok i Know it says the mud guard and the decorative skirt MAY not fit the US/Canada Yaris... cannot confirm this wether this fits of American Yaris or not?

[uncleyaris]

p/m me when you get them or post on here a D.I.Y on the wiring PLEASE!!!!!!

With no connector, it'll be a spice and dice. Shrink wrap required. I can't wait to see it also. Chino you are following in the the steps of violin, now Two in NA to have these tails. It should be an easy install.:w00t:

[uncleyaris]

Thomas, has there been any thought of a second round? Any new things?

[Shroomster]

With no connector, it'll be a spice and dice. Shrink wrap required. I can't wait to see it also. Chino you are following in the the steps of violin, now Two in NA to have these tails. It should be an easy install.:w00t:

one would hope you could just take the two connectors and pop the wire ends out and match them up thats what i'm hoping for, thats why i want to see a diy if it's possible... that way there will be no cutting required...

[ChinoCharles]

I could go buy any generic molex connector with enough spaces in it for the amount of wires going to each tail light. Of course, I generally think molex connectors are a PITA and I will probably chump out and do it wire by wire. Rest assured however I go about it I'll write a DIY and take my time, because this is the fourth and final time I'm playing with these f'n tail lights!

With these lights and the new badges that are coming in a week or two, I promise you you've never seen a Yaris quite like what mine will look like in a bit. Stay tuned. :cool:

[eTiMaGo]

Thomas, has there been any thought of a second round? Any new things?

Still working things out for new stuff, I really want to be able to supply body kits, wait and see...

Looking into replicas of:
Burnout KD VII
Ings+1
C-ONE
RS front and rear bumpers

And original kits:
Arto/TRD widebody kit
TRD lip kits for sedan

They would be unpainted, but there is a solution to match color codes in the US/Canada and elsewhere. Basically, if the paint shop has a sample of your paint, they can recreate it. The best way to do this would be for you to mail me the little round tow hook cover from your front bumpers, and they can work from there.

But, the problem with shipping large, painted items is the risk of scratching while in transit, so I still would not recommend it.

Also, please keep in mind the bodykits are replicas, in other words, they will be a heck of a lot cheaper than the original JDM parts. We will get them from one of the best rated workshops here, so fit and finish should not be a problem. But, I don't have any more details to share at the moment, shipping is still a huge variable that we are working on. :wink:

Anyway if anyone else still wants stuff that's already up in this thread, lemme know!

[eTiMaGo]

ok i Know it says the mud guard and the decorative skirt MAY not fit the US/Canada Yaris... cannot confirm this wether this fits of American Yaris or not?

From what I've seen of members in the US importing lip kits, the mud guards should fit, but the skirts will not, your bumpers are a lot deeper, so it won't match...

[R0ME0]

Any updates Thomas? Everything been shipped out?

[bigsky2]

If it helps any, I deal with the shipping industry on a daily basis. FCL, LCL, Break bulk, Ocean/Air.

I've a good relationship with a few steamship lines and freight forwarders (the company I work for is considered a NVOCC, rates are competitive).

[eTiMaGo]

Still waiting on the stuff, was supposed to get the aftermarket stuff yesterday, but they only got everything in stock late in the evening, so I'll be going in a couple of hours, I have an errand to run in the same area of town anyway :smile:

As for the Toyota stuff, they should be giving me a call today too, to update me of the status, it should also be ready to pick up today, or tomorrow.

[blacksan]

Woot, Viva La France!:biggrin:

[uncleyaris]

I could go buy any generic molex connector with enough spaces in it for the amount of wires going to each tail light. Of course, I generally think molex connectors are a PITA and I will probably chump out and do it wire by wire. Rest assured however I go about it I'll write a DIY and take my time, because this is the fourth and final time I'm playing with these f'n tail lights!

With these lights and the new badges that are coming in a week or two, I promise you you've never seen a Yaris quite like what mine will look like in a bit. Stay tuned. :cool:

:eyebulge: , you never cease to amaze! Can't wait.

[uncleyaris]

Still working things out for new stuff, I really want to be able to supply body kits, wait and see...

:thumbsup:

[eTiMaGo]

What's all this then? :wink:

Gonna take more detailed pics later, kinda in a rush now, but it all looks gooooood!

[tk-421]

:thumbup::thumbup::thumbup:
can't wait to see this!

[eijikikimaru]

What's all this then? :wink:

Gonna take more detailed pics later, kinda in a rush now, but it all looks gooooood!

I need to go change my underwear... you just made me wet myself with glee

[Kaotic Lazagna]

sweet. can't wait to see those pics.

[eTiMaGo]

All right, here's a bit of an update!

To get started, the replica TRD gauge cluster:

http://www.etimago.com/yaris/accessories/actual/gaugecluster.jpg

Firstly, the sizes of the holes for the gauges are:

Center hole: 9cm (a little more than 3.5")
Side holes: 5cm (2")

Secondly, the paint job on these is really not so good, very easily scratched. I would suggest buyers to put on an extra coat of good quality matt black paint.

Next, the replica RS Modellista taillights:

http://www.etimago.com/yaris/accessories/actual/rsmodellista.jpg

They look very nice in person, as mentioned before, the side area is more of a chrome look than the original's satin finish. There's also a picture of the connector attached to it, I am not sure how the USDM Yarii taillights are connected, but it should not be too difficult to match the wires and splice as appropriate :smile:

The "Altezza" smoked LED lights:

http://www.etimago.com/yaris/accessories/actual/altezzaLEDsmoked.jpg

Look surprisingly amazing in person... The cover is actually a bit darker than the picture shows, it would be very stealth when mounted in the car.
Here's the back of it, the plug is once again different from the modellista ones:

http://www.etimago.com/yaris/accessories/actual/altezzaback.jpg

And, of course, the LED side mirrors!

http://www.etimago.com/yaris/accessories/actual/mirror1.jpg
http://www.etimago.com/yaris/accessories/actual/mirror2.jpg

One interesting thing is that these not only have orange lights for the blinkers, there are also white LEDs that can be wired into your illumination circuit, so that they come on when you turn on the headlights!
Here's the back with the three wires (ground, white lights, orange lights):

http://www.etimago.com/yaris/accessories/actual/mirror3.jpg

I'll get my set installed ASAP and take pictures or even a video, it should not require any special skills or tools except maybe a soldering iron...

Lastly, the rear Netz emblem, it's in a sealed bag so I don't wanna open it without hasher22's permission :wink:

http://www.etimago.com/yaris/accessories/actual/netzrear.jpg

So, here we are, one step closer to getting this done!!!
The Toyota stuff will be ready to pick up on Monday, so we can finally ship next week!

Also, I will be away for the next few days, going on a quick business trip, but will be back Sunday, so don't worry if I'm a bit slow in responding to any questions here!

[tk-421]

Wow... looking at those smoked tails almost makes me think twice about my rear Modellista(ish) lights! I'm still thinking about possibly smoking these, so the chrome shouldn't look too chromey. I think they'll look great either way.

I'm super-stoked with the side mirrors! Nice to have the option to choose LED colors.

Now I really can't wait for the Toyota parts... :headbang:

More of these :coolpics: would be really appreciated, please... You know you want to! :biggrin:

[Violin]

I see my mirror covers!

[tk-421]

I see my mirror covers!
Yo Violin: Do you notice a huge difference between the replica Modellistas and the real deal based on the pic?

[ChinoCharles]

MY TAIL LIGHTS ARE SO SEXY!

[Kaotic Lazagna]

niiiiiice. now for the Toyota accessories to come in.

[hasher22]

oh snap.....whoooo yay my rear badge is in .. woop woop woop....

u can open it ;)

[Violin]

Yo Violin: Do you notice a huge difference between the replica Modellistas and the real deal based on the pic?

Aside from the chrome, not really.

[eijikikimaru]

I hope the shippment will get here in time for me to install them for the So.Cal Yaris meet @ the El Toro air base.

I'm so excited, I just can't hide it... so distracted I can't do my job~ weeee!!!

[Kaotic Lazagna]

anything new, Thomas?

[ism3t]

"thomas", that trd gauge thing, any pics of it installed?

[eTiMaGo]

Nothing new today, guys, sorry, but I have way too high a workload this week, barely enough time to spend here :tongue:

But I did manage to find 45 minutes to go down to the Toyota dealership and pick up a few things.......

http://www.yarisworld.com/forums/attachment.php?attachmentid=5460&stc=1&d=1180959160

I'm glad the LB has so much room inside :biggrin:

My car's *so* cool, it has *5* spoilers :laugh:

But seriously, folks, looks like I won't be getting much sleep tonight, gonna have to take better pictures, then pack up all those goodies for ya!

[redyaris]

When is the next group buy????

[eTiMaGo]

I didn't want to open anything that was sealed, but here's a preview of the various Toyota stuff...
As you will see each item is well packaged and comes with clear instructions in english (and Thai, if you want a bit more of a challenge :biggrin:)

Yaris Sporty Muffler

http://www.etimago.com/yaris/accessories/actual/yarismuffler1.JPG
http://www.etimago.com/yaris/accessories/actual/yarismuffler2.JPG
http://www.etimago.com/yaris/accessories/actual/yarismuffler3.JPG

Vios Muffler

http://www.etimago.com/yaris/accessories/actual/viosmuffler1.JPG
http://www.etimago.com/yaris/accessories/actual/viosmuffler2.JPG

Both of these will be very easy to put on, just align them and tighten those two screws using an appropriate hex wrench.

Manual Pedals

http://www.etimago.com/yaris/accessories/actual/mtpedals.JPG

These are clip-on, you just need to pull out the old rubber ones and replace with these. The accelerator pedal is a little trickier as there is also a pin holding it in place, you will need a hammer and some kind of a punch to knock it out. The pedals are made of aluminium and those black circles are rubber pads.

Soft Luggage Tray

http://www.etimago.com/yaris/accessories/actual/softluggage1.JPG
http://www.etimago.com/yaris/accessories/actual/softluggage2.JPG

I must say this is very nice, it's a kind of thick rubberized cloth with a silvered embossed logo, and the edges are raised to prevent the spread of any spilled liquid.

Manual Gear Knob

http://www.etimago.com/yaris/accessories/actual/mtknob.JPG

Made of pleather and painted metal, just screw out the old knob, and screw this one back in.

Center Console

http://www.etimago.com/yaris/accessories/actual/centerconsole.JPG

Perhaps better known as the JDM center console, it's a handy place to keep CDs, and there's a fold out drink holder at the back. All mounting brackets and screws included, installation should not be too challenging.

Ignition Key Light

http://www.etimago.com/yaris/accessories/actual/ignitionlight.JPG

This is pretty fancy, looks to be just a plug-and-play installation, electrics-wise.

Panel Box

http://www.etimago.com/yaris/accessories/actual/panelbox.JPG

Basically just a set of doors for those pockets on either side of the AC controls. More or less snap-in installation.

Rear Bumper Step Guard

http://www.etimago.com/yaris/accessories/actual/rearstepguard.JPG

Hard to take a picture of this one, but it's basically a sticky-backed piece, the instructions help in aligning it properly.

Yaris Spoiler

http://www.etimago.com/yaris/accessories/actual/yarisspoiler1.JPG
http://www.etimago.com/yaris/accessories/actual/yarisspoiler2.JPG

Perhaps the most eagerly awaited item! It's packed pretty tight in the box so I didn't really want to pull it out, but it comes with a template to align it properly.

Vios (sedan) Spoiler

http://www.etimago.com/yaris/accessories/actual/viosspoiler.JPG

Now this one will be a pretty involved installation, there's a lot more parts than I expected, braces and such, and of course the wiring for the built-in stop light.

And, to look over all this stuff and make sure no pesky rebels try to steal it all in the middle of the night...

http://www.etimago.com/yaris/accessories/actual/guard.JPG

Yes, I'm a big fat geek.

[Doc Zaius]

:drool: :bow:

[Kaotic Lazagna]

hehe, get some sleep, you don't want to break those spoilers in half :tongue: :wink: . but yeah, take care of your work first, then get to the parts. is my spoiler the one that's more "involved"?

[eTiMaGo]

nah I think I'm gonna pull an all-nighter today, it's been a long time I haven't done that... Then tomorrow I won't have so much to do, and I can get this stuff shipped out :smile:

[Kaotic Lazagna]

what are the braces for? oh, and i was thinking of splicing third light on the spoiler to the one i already have (behind the window), so that only the one from the spoiler turns on (i think it'll look tacky with both third lights on at the same time).

[Kaotic Lazagna]

nah I think I'm gonna pull an all-nighter today, it's been a long time I haven't done that... Then tomorrow I won't have so much to do, and I can get this stuff shipped out :smile:

sweet! so i should wait a month for the spoiler to arrive?

[eTiMaGo]

sweet! so i should wait a month for the spoiler to arrive?

I'm not sure, I'll have to measure and weigh the stuff when it's all ready, and see how I can work with the shipping charges, it *may* be possible to use a faster shipping method.

[tk-421]

http://www.etimago.com/yaris/accessories/actual/guard.JPG


Rebel scum! They better not mess with my boxes! :evil:

[JosephDoc]

Wow.. A lot of toys here!
Hmm, I need to do a shopping list.

[eTiMaGo]

One thing I need to mention, I will need to raise the prices a little on the official Toyota stuff, I really wanted to make minimal profit off them, but didn't count on paypal's exchange rate being so crappy, so I actually lost a couple of bucks on this round, oops.. No big deal though, I'll post up the updated prices a bit later, it's not going to be a big change.

[tk-421]

Thomas, please let me know if/when you receive my PM about shipping. Thanks bud! :respekt:

[ROCKLAND TOYOTA]

you got a price on that lighted ignition or better yet a part number from toyota.....

[brickhardmeat]

making me want thai accessories.

[blacksan]

Dam, I can't wait for my purdy exhaust tip. If I would have known that those doors for the concol (spl?) where snap on I would have ordered them too. So, next order is going to include them as well.:thumbsup:

Thank's A bunch for your work "T-Man".:clap:

[Blenjar]

yaya its my liftback spoila!
Hey kaotic, r u excited to get ur spoiler? im more excited about u getting ur things tahn u r...i like that spoiler!

-- Blen

[glxBoSS]

I guess I completely missed out on this batch.. Please PM me on the next batch incase I miss this thread again.

[Blenjar]

wwhere u been???

-- Blen

[Nutzoids]

Yes, I'm a big fat geek.

Thomas you think your a geek?

Star Wars Weekend at Disney this week (yesterday)

I am soooooo happy right now!

:evil:

[blacksan]

Hard Ass Philly Geek, Yo Adrian! :biggrin:

[tk-421]

Thomas you think your a geek?

Star Wars Weekend at Disney this week (yesterday)

I am soooooo happy right now!

:evil:

I'm one jealous stormtrooper... :bow:

[glxBoSS]

wwhere u been???

-- Blen

Waaaay too much spent surfing the web for Yaris parts.....and nothing to show for.:iono:

[ism3t]

"thomas", that trd gauge thing, any pics of it installed?

bump?

[eTiMaGo]

bump?

No, I cannot find any pictures of it installed, only the original TRD one...

[Shroomster]

ok let me ask one more noob question, are the Netz logos just replicas or is there a real Lightning bolt emblem for the front and back made by toyota?