|
05-20-2009, 05:59 PM | #1 |
Drag Dr-5 Rim Project
Ok I didnt know where to post this... so Im Posting this Here.... I curently have 17in Drag Dr-5 Rims.. I know They are out dated. so im bringing them todate by polishing they to a miror shine here is what i have so far The first is what i got so far the 2nd is before and the 3rd is in progress...
so tell me what you think
__________________
Last edited by ImportRacer88; 05-20-2009 at 06:02 PM. Reason: updated |
|
05-20-2009, 06:03 PM | #2 | |
Start another Oil Thread!
|
you'll want to use 00 steel wool, then a powerball mini :)
looks good so far!
__________________
Quote:
|
|
05-20-2009, 06:43 PM | #3 |
wat to even it out and polish it i was gunna start hand wet sanding startin at 1000 grit going up to 2000 grit then use a buffing compound to polish
__________________
|
|
05-20-2009, 06:44 PM | #4 | |
Start another Oil Thread!
|
make sure and use a sanding block
__________________
Quote:
|
|
05-20-2009, 07:49 PM | #5 |
Super Moderator
Drives: 2014 White VITZ Join Date: May 2007
Location: Huntington Bch, CA
Posts: 4,938
|
Nice going. Keep us posted on your progress.
|
05-20-2009, 09:15 PM | #6 |
They look good. Post pictures when you are done and have them in the car.
|
|
05-20-2009, 10:17 PM | #7 |
Ive been workin on this for like a week now the shiny one is the only one i got that far. the one with the grinder on it is the 2nd one i started this is hard work and costly too.
__________________
|
|
05-20-2009, 10:41 PM | #8 |
Drives: 2008 yaris, stripped, red Join Date: Jan 2009
Location: SE Texas
Posts: 977
|
i used sandblast to get rid of coating, ball with 3m high cut polishing compound, then a 3m high polish compound on my boyd coddingtons....
all with a flitz ball |
05-26-2009, 05:37 PM | #9 |
Im using the turtlewax rubing compound and i tried the 00 stut it look Steel wool but it makes it look like shittocky mushrooms. so im using my angle grinder with medium and fine pads and then the compound and it looks good.... good enuff for me for right now when i get back to pa where im moving back to i will do more to them
__________________
|
|
05-27-2009, 04:18 AM | #10 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Are you just going to do the spokes and the outer rim? Keep us posted.
|
05-27-2009, 10:04 PM | #11 |
just the spokes ant the thin outer part
__________________
|
|
05-28-2009, 09:07 AM | #12 |
Drives: '08 Yaris Join Date: Oct 2008
Location: Dover, Ohio
Posts: 7,606
|
Where you moving to in PA?
|
05-28-2009, 06:15 PM | #13 |
its called meshoppen 26 mins north of scranton on route 6
FYI the rim project is off i sold the rims and tires just to survive the week and than i should be up in pa by the 7th
__________________
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tire noob question..what's the widest tire size can run on stock 15"s? | detroiter | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 22 | 12-06-2011 09:44 AM |
New Project AE86...! | CASTREX | Photo-Video-Media Gallery | 29 | 02-01-2009 03:09 AM |
delayed turbo project... | joey1320 | Forced Induction Forum | 8 | 09-26-2007 11:18 PM |
Project Yaris. | RodimusPrime | General Yaris / Vitz Discussion | 8 | 07-02-2007 12:19 AM |
Rim sizing - what size to get for OE equivalent? | jay | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 12 | 11-20-2006 03:25 PM |