Remote Start DIY Wiring Guide 2006-2010 Yaris

[Nadial]

Originally Posted by CTScott

Parking light is not an input, it is an output, so your device will output +12V to pin 29 to flash the lights.

Hi guys,


First off, great forum, I have searched for a couple of days and found all the wires (even how to wire throught the firewall ) for my DIY alarm install on my 09 two door hatchback, or so I thought.

Surely this is a noob question, but I cannot get the parking lights to flash. My sp-101 manual depicts two (white) 12v flashing light outputs (7.5 amp x 2).

I have tried:

Connecting one white wire to pin 13, parking light (-), on the 13-pin plug by the headlight switch without success

Connecting one white wire to pin 29 (green wire), parking light (+), on 30-pin plug 4A in the dash fuse box without success.

I have tried alternating the two white wires in both positions as well.

It might bear mentioning the the the 12v power input is connected to the gray wire, pin 5, on the 8 pin plug by the ignition swith. Which is supposed to be constant 12v.

Thanks in advance