Which HID to get: Bi-Xenon or Hi/Lo Beam?

[thebarber]

Originally Posted by marcus

hi/low....in canada we need day time running lights so i figure ..during the day keep it on high beam which will shut off the fogs..then set it it low at night plus fogs hid..= brightness.. good luck!

just disable the drls...if you dont have factory fogs, just pull the drl module, thats what i did

[33OH]

Originally Posted by thebarber

just disable the drls...if you dont have factory fogs, just pull the drl module, thats what i did

Same here. Takes 5 minutes.

[marcus]

well i would but i have fogs and i got hids on them...cant lose that..plus i dont want hid running during daytime....

Originally Posted by thebarber

just disable the drls...if you dont have factory fogs, just pull the drl module, thats what i did

[thebarber]

Originally Posted by marcus

well i would but i have fogs and i got hids on them...cant lose that..plus i dont want hid running during daytime....

so you have an RS? then just cut the power wire to the DRL's (i did that on my XRS) and install a switch for them...

[RSboyz]

Originally Posted by marcus

well i would but i have fogs and i got hids on them...cant lose that..plus i dont want hid running during daytime....

so you must disable DRL with either bi-xenon or hi/lo beam HID installed on car? when i get my HID, im thinking of switching the DRL to my fog lights. is that possible? im probably gonna go to a shop and get everything done, not sure how much it would cost. any idea?

[marcus]

Originally Posted by RSboyz

so you must disable DRL with either bi-xenon or hi/lo beam HID installed on car? when i get my HID, im thinking of switching the DRL to my fog lights. is that possible? im probably gonna go to a shop and get everything done, not sure how much it would cost. any idea?

you can switch wire fr drl to low beam just remember not to flash ur high beam cos i think if shuts off the fogs when you do that..rule #one you cannot have hid going on and off due to the ignite..

[RSboyz]

Originally Posted by marcus

you can switch wire fr drl to low beam just remember not to flash ur high beam cos i think if shuts off the fogs when you do that..rule #one you cannot have hid going on and off due to the ignite..

im currently running PIAA extreme white halogen right now and i think it does an adequate job, but i think because my parking light is still the stock halogen bulb, so it makes the PIAA not as bright. Thinking of changing the parking light to LED since there are so many restrictions with HID.