Custom Axleback - Pics and vid.

[posaunemeister]

Here's a pic of my axleback: 2 1/4" Dynomax Super Turbo Muffler (I was too impatient to wait for a 2" DSTM, so I purchased one from a local Advance Auto Parts store for $50. It's not the lighter, single-wall $20+ dollar version. I hacked off the muffler with a reciprocating saw (w/ a metal blade) and drove it to the muffler shop where the tech welded on a pipe configuration that would allow such a large muffler to fit under my car. And then I took it off and painted the entire axleback with a high heat, high gloss black paint. I love the end result.

[darkMINI]

Originally Posted by posaunemeister

Here's a pic of my axleback: 2 1/4" Dynomax Super Turbo Muffler (I was too impatient to wait for a 2" DSTM, so I purchased one from a local Advance Auto Parts store for $50. It's not the lighter, single-wall $20+ dollar version. I hacked off the muffler with a reciprocating saw (w/ a metal blade) and drove it to the muffler shop where the tech welded on a pipe configuration that would allow such a large muffler to fit under my car. And then I took it off and painted the entire axleback with a high heat, high gloss black paint. I love the end result.

I used the little $25 Dynomax muffler and installed a Harley baffle to tone it down nicely. The baffle also adds a little back-pressure that may be lost in the high-flow muffler. Not sure if it matters much in that respect.