Quote:
Originally Posted by economatic
Perhaps I wasn't clear in my original question. The write-up I found said there is only a black wire coming out of pin 8 of the D3 harness. In my sedan there are 3 wires coming out of the D3 harness--1 black, 1 light brown, and 1 pink and if I remember correctly the black wire was coming out of a different pin (I think pin#5 of an 8 pin harness). Also, I couldn't test the horn because the airbag and horn switch are missing thanks to the thieves. 
I just want to confirm that this is indeed the right wire so I can call the installation finished. Pretty irritated with the mess of my car these thieves made... |
That really stinks!
The horn should be pin 8 of D3 on the Sedan as well as the LB.
Conn D3.jpg
10-19-2009, 03:23 PM
Similar Threads
Threaded Mode