GROUP BUY: 1NZ to 1ZZ TB spacer/adapter

[Maitre_Te_Te]

the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll

[tk-421]

Originally Posted by Maitre_Te_Te

the intake side of spacer (not throtel side) is smaller tan other side, Ok but this is the same diameter taht the original throtel? If this is the same diameter, the 1zz throtel body become a 1nz throtel body...??? Anybody can explain to me please? Im not good with physic! lollll

The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.

[Maitre_Te_Te]

Originally Posted by tk-421

The spacer has two holes: One with a regular 1NZ diameter hole in it, and the other one with a larger 1ZZ diameter. You need to attach it so the small hole is facing the manifold and the large hole is facing your 1ZZ throttle body.

Yes I know but if the hole is the same that original, what for use a larger thrtoel if you reduce de diameter. The 1zz throtel is juste to litel larger than the holl of intake manifold, so the spacer can be 2.2 ich to 2 ich, not 2.2 ich to 1.8 inch? I think :P

[Maitre_Te_Te]

The bolt is M6 X 1.00 (metric) and the Length is 75mm aprosimative (3 inch)

I search for to find a dealer

[Maitre_Te_Te]

I have install mine today. I have use the original gasket for intake to spacer, and for spacer to TB just a silicone. Bolt is M6 X 1.00 3 inch . Result, idle fix at 600 RPM and maby a litle diffrent at mid range but at cold start, engine go at 2900rpm.