DIY - 1.8L 1ZZ-FE TB Connector Chip Swap - Toyota Yaris Forums

*tk-421* · 05-05-2010, 10:42 PM

Thanks for posting this info again.

What's the best way to replace a stripped idle screw? It was pretty worn when I bought the TB, and I ended up stripping it completely after a while. I don't think I can drill it (without hurting the TB) since it's pretty much level with the enclosure already.

I'm pretty much used to the high startup idle @ ~2.5K, but it goes down after 20 seconds or so. Not a huge deal, but I might fix it just to make it perfect.

As far as the bang-for-buck comment, I agree this mod is one of the best candidates out there for the Yaris.

05-05-2010, 10:42 PM	#18
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	Thanks for posting this info again. What's the best way to replace a stripped idle screw? It was pretty worn when I bought the TB, and I ended up stripping it completely after a while. I don't think I can drill it (without hurting the TB) since it's pretty much level with the enclosure already. I'm pretty much used to the high startup idle @ ~2.5K, but it goes down after 20 seconds or so. Not a huge deal, but I might fix it just to make it perfect. As far as the bang-for-buck comment, I agree this mod is one of the best candidates out there for the Yaris. __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1.8L Engine Swap, Possible?	Yaris T-Sport	Performance Modifications	4	05-06-2007 06:57 PM
swap for 2zz-ge????	yarisTOONR82	Performance Modifications	12	03-23-2007 07:15 PM