Remote Start DIY Wiring Guide 2006-2010 Yaris

[CTScott]

Originally Posted by devinlamothe

Thanks for the info Scott.

So I finally did get the Scotchlok connectors as well as my remote start but I am having some issues getting it going.

This is a Viper 4203v unit (Responder One):

Starter wires -> car wires

Pink Ignition -> Green ignition
Pink/White Secondary ignition -> Pink ignition
Purple Starter -> Black starter
Orange Accessory -> White accessory
Red 12v - 12v on fuse panel (top)
Red 12v - 12v on fuse panel (top)

Black/White Neutral Switch -> to ground
Violet/White Tach wire -> L.Green on OBD2
Brown brake -> Green brake +12
Grey hoodswitch -> not connected

Everything looks like it is connected properly, but it seems the unit will not turn on. I would think if the unit was powering up I would see the red LED come on for at least a second but it does not.

I have checked my connections with a multi-meter and everything looks good.

Is there something I am missing here? I have never installed a remote start before and reading through this thread made me think it was easy, lol.

I don't have the manual for the 4203v, but what you are connected to looks good. Check the install manual for a start-up or configuration process that may have to be done before it will work.