Lower alternator bolt won't go back in, help!

[Tmblackflag]

Originally Posted by CTScott

Stick something smaller through (like a screwdriver) to make sure you have the holes somewhat lined up. Once that goes through OK, move up to something closer to the bolt's diameter. Also, check to make sure that the lower bolt is not bowed.

Sometimes we forget some of the tools we have. I stuck an adjustable mirror down there and the holes were indeed not lined up. Somehow, the pivot bracket had come lose and lowered itself, further pushing the alt out of alignment. I put on some gloves and lifted the alt up, then threaded that lower bolt in.

Job is complete! Thank you.