 |
 |
|
|
07-21-2018, 11:04 PM
|
#12 |
 
Drives: 2013 NCP130 Join Date: Nov 2015
Location: Sydney, Australia
Posts: 386
|
Adam,
You only need to test between the two pine S in the plug. Ignore the horn wire for this test. All the switch functions on the stalk are momentary. If the stalk is in its rest postion, you should not see any connection between the pins. You should see a short circuit while pressing the On/Off button, and the other values I mentioned before when operating the stalk to one of the Set/Resume/Cancel positions. If you can find connector C3 in the steering column, it should have only 2 wires in it, blue and brown. With the ignition swithed on, shorting these 2 wires should turn on or off the cruise control indicator light in the instrument cluster. Hope you get it working soon. I would be lost without my cruise control.
__________________
Running on standard AU 14" steel wheels (14x5 rims, 175/70R14 tyres). Added reversing camera and touch screen radio, cruise control, 16" rear wiper blade, tow bar and dash cam. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag | CTScott | DIY / Maintenance / Service | 307 | 04-04-2023 03:43 AM |
| Broken Auto Transmission cable fix | tmontague | DIY / Maintenance / Service | 0 | 09-19-2016 10:16 AM |
| Rostra Cruise Control install done on MT | AlexK | DIY / Maintenance / Service | 34 | 09-18-2007 03:21 PM |
| How difficult is it to install the aftermarket cruise control kit? | grampi | Performance Modifications | 3 | 07-19-2007 08:06 AM |
| official: cruise control install pdf | punch | DIY / Maintenance / Service | 3 | 12-19-2006 06:26 PM |
Threaded Mode