Car will not idle after MAF relocation

[myfirstyota]

I'm not sure about the 1.3 engine as we simply don't have those available in the yaris here in North America. But on the 2zr swap I did, the maf and the pipe it mounts to is removable. You'll end up with a section of pipe about 4" long with the maf mounted in it. If this happens to be your setup, maybe that oem maf tube could be integrated into the cold air setup.

[G.Chetcuti]

Originally Posted by myfirstyota

I'm not sure about the 1.3 engine as we simply don't have those available in the yaris here in North America. But on the 2zr swap I did, the maf and the pipe it mounts to is removable. You'll end up with a section of pipe about 4" long with the maf mounted in it. If this happens to be your setup, maybe that oem maf tube could be integrated into the cold air setup.

Yeah unfortunately the 1.3 setup has the MAF sensor integrated into the airbox which is located right above the throttle body, so I didnt have much room to play with, because the bonnet space is already pretty limited so adding a 90 degree bend over the existing MAF housing in the airbox wouldn't fit. Hence why I opted to relocate the MAF. Alas the car is working fine as I have just driven it