OFFICIAL Yaris SEDAN thread

[mario98c]

My Yaris with new wheels.
http://img689.imageshack.us/img689/5807/dsc00518jv.jpg

[fnkngrv]

ืำnew hood


lookin nice...I can't wait to get a new hood like CF...that would really set the look off nice along with the other CF accents in store...

[fujiwaru]

ืำnew hood

:drool: very nice CF hood!!

[darkmoon87]

so not fair that thailand guys get all those nice ones for so cheap let alone the dirt cheap hourly labor charges lol...

nice hood btw nunza

[bugg_master]

ืำnew hood

hey viosnuza how much was the whole body kit set? and where did u get it?

[destroyerjp]

Hey Guys!

I'm new here. Sharing some pics of my 09' Vios E from Malaysia.

Only done minor stuff so far. Ducktail spoiler, 2007-2009 'S' spec skirts. 16" rims wrapped in 205/55/R16 Yokohama S drives.

[viosnunza]

That a functional hood or are the vents plugged? If it is functional, how is the fit and then next question is how when the hell are we gonna get this shipped over here? Oh yeah how much does it cost?

i don't know how much does it cost

[viosnunza]

hey viosnuza how much was the whole body kit set? and where did u get it?

what kind of body kit set? ex. trd srv

i get it thailand

where are u ?

[link]

This is mine.
Comments welcome
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00661.jpg
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00544-2.jpg

[GeneralDon7]

:w00t:Wow that looks awesome, and very clean install. Are your door handles a white light or blue?

[Vioz]

I think he put blue LED's on the inside of the handle or doesn't garm sell those handles? or was garm's LED handles on the outside?

[GeneralDon7]

I think he put blue LED's on the inside of the handle or doesn't garm sell those handles? or was garm's LED handles on the outside?

I believe his were for the outside.

[fujiwaru]

Is that a Gran Turismo sticker i see on the windshield and rear window? lol

[link]

Yes, that Gran Turismo decals!
Was thinking whether to add racing strips to it

[changchewsoon]

everybody's yaris sedan/vios here is looking good! :w00t:

[ERA]

This is mine.
Comments welcome
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00661.jpg
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00544-2.jpg

very interesting.

ืำnew hood

http://www.yarisworld.com/forums/attachment.php?attachmentid=34182&stc=1&d=12755161869

i think ive found my favorite. looking sweet. more pics would be nice aha.

[eii]

This is mine.
Comments welcome
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00661.jpg
http://i92.photobucket.com/albums/l22/mark-xlink/DSC00544-2.jpg

What skirt/rear & front lip kit is that on your car and where'd you get that wing?

[AdeJong 03]

got my car featured on the iputinwork site

http://www.iputinwork.com/wp-content/uploads/2010/06/yaris_crkai_mgm_800.jpg

[Kaotic Lazagna]

Okay, since I was a third way into the wear bar on two of my tires and half a mm away from the bars on the other two, I decided to get new tires. I wanted the General Exclaim UHP, and then just repair and powder coat my "Ikari's". But for the same price or less, I found a set of Giovanni G817H with Lexani LX9100's. So since I also wanted a more flush look, as well as something less sporty looking, I picked them up. On to the pics (yeah, I know my car is really dirty, it rained outta no where).

Old rims and dead Falken's weigh in at 38.4 lbs each.
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0072.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0073.jpg

G-Line's with the 100% Lexani tires weigh in at 40.6 lbs each :(
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0074.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR1.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0078.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0094.jpg

:biggrin:
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0087.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0088.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0089.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0090.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0101.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0102.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0104.jpg

Don't mind my legs and feet :p
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0105.jpg

Well, this is what happens when you're flush and don't have stretched tires:

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0001.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0002.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0003.jpg

Started smelling burning rubber within a mile of driving (total of 4 people in the car), and just drove for about 5 miles total (couldn't turn back right away). I had someone pull up next to me and tell me to roll down my window to say that one of my tires was smoking :(

I'll be taking out the rear hub spacers, and install them only for shows. I'll also be putting some rubber spring spacers in the rear.

[derickveliz2]

.
Very nice Kao! as usually

These picture are my favorites:

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR1.jpg

and...
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0101.jpg

.


The rubber spring spacers works for me very good, let me know how it goes taking the spacer out, with my primitive tools I just can't take them out.

Looking good...
.
:burnrubber:

[Herbicidal]

I like the new rims too Kaotic! :thumbsup: We somehow gotta connect for a sedan photo shoot. Maybe take part of a day and head up the road past the Foresthill bridge. There is a lake back there (past the town of Foresthill) and the road goes for quite a ways into the mountains. It would be a fun drive!

[jpadua]

I'm really loving the rims Kaotic! what if you try the spring cushions again? might relieve some rubbing.

[AdeJong 03]

hey laz- consider cutting your rear fenders. i did and it gave me like 20 mm more clearance. pretty awesome

[jpadua]

Hey AdeJong, im interested in how you did your fenders.. 20mm is plenty! I'm changing my rims soon as well, I might run into rubbing problems coz my new rims would be 8" wide.

Hope you can post some pix of your fender.

So you would recommend cutting over rolling fenders?

[jpadua]

Laz at least your's is just rubbing, I had slicing! so I had to remove my spacers for now...

http://i562.photobucket.com/albums/ss67/jpaduadesigns/Tires/DSC03089.jpg

[jpadua]

got my car featured on the iputinwork site

http://www.iputinwork.com/wp-content/uploads/2010/06/yaris_crkai_mgm_800.jpg

Congratulations!!! I visit that site often... :headbang: the very first yaris sedan on "Iputinwork.com"

I hope I get to be featured there one day... will be getting my Work Euroline DHs in a few weeks.

[JumpmanYaris]

I like them wheels KL looks better

[Kaotic Lazagna]

I like the new rims too Kaotic! :thumbsup: We somehow gotta connect for a sedan photo shoot. Maybe take part of a day and head up the road past the Foresthill bridge. There is a lake back there (past the town of Foresthill) and the road goes for quite a ways into the mountains. It would be a fun drive!

I'll be in Roseville this coming Thursday (22nd) for a few hours (don't want to drive back to Sac and then go back to Roseville after those few hours). I don't think my car will be clean since I'll be cleaning it on Friday for the NorCal meet. We can still do a photoshoot tho. :wink:

However, since I'm there for dropping my gf off for a test, she said be ready to pick her up when she calls. hahaha. I'll let you decide on this.

[Kaotic Lazagna]

.
Very nice Kao! as usually

These picture are my favorites:

http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/G817HDR1.jpg

and...
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0101.jpg

.


The rubber spring spacers works for me very good, let me know how it goes taking the spacer out, with my primitive tools I just can't take them out.

Looking good...
.
:burnrubber:

Thanks. Taking out and putting in the hub spacers is pretty easy, especially if you are using the DIY guide here. But it's good to know that the rubber spring spacers works well.

[Kaotic Lazagna]

I'm really loving the rims Kaotic! what if you try the spring cushions again? might relieve some rubbing.

Yup, going to try out the rubber spacers again. heehe. Thanks.

hey laz- consider cutting your rear fenders. i did and it gave me like 20 mm more clearance. pretty awesome

What did you use to cut the metal? And what about rusting on the exposed areas now? It's either cutting or rolling the fenders. hahaha.

[Kaotic Lazagna]

Laz at least your's is just rubbing, I had slicing! so I had to remove my spacers for now...

http://i562.photobucket.com/albums/ss67/jpaduadesigns/Tires/DSC03089.jpg

hahaha, mine is slicing and dicing as well as rubbing. hahahaha. I'm going to cut the fender liner at the front, and see what I can do about the rear.

[Kaotic Lazagna]

I like them wheels KL looks better

Thanks :biggrin:

[Herbicidal]

I'll be in Roseville this coming Thursday (22nd) for a few hours (don't want to drive back to Sac and then go back to Roseville after those few hours). I don't think my car will be clean since I'll be cleaning it on Friday for the NorCal meet. We can still do a photoshoot tho. :wink:

However, since I'm there for dropping my gf off for a test, she said be ready to pick her up when she calls. hahaha. I'll let you decide on this.

That may not work for me since I'm at work until 4pm. Do you have any weekends that you'll be up in this area?

[Kaotic Lazagna]

Ummm, I'll PM you when I'm back in Sac. After the NorCal meet, I'll be back at my mom's place in the Bay Area. However, once Sac State starts again, I'll be up there longer. hahaha.

[shameer_k]

i recently installed trd springs:thumbup:

[jpadua]

Looks Great!!!

[derickveliz2]

.
That's a scary sign! Nice photo effect in black!

[JumpmanYaris]

shammer them wheels are sick 2

I want them!

I think I am gonna start a wheels collection like my shoes lol

[shameer_k]

note i repainted them... they suppose to be satin black, but i think its still shiny

[rye7jen]

daylight led
Got some DIY on the LEDS? :wub:

[Pitt Yaris]

Okay, since I was a third way into the wear bar on two of my tires and half a mm away from the bars on the other two, I decided to get new tires. I wanted the General Exclaim UHP, and then just repair and powder coat my "Ikari's". But for the same price or less, I found a set of Giovanni G817H with Lexani LX9100's. So since I also wanted a more flush look, as well as something less sporty looking, I picked them up. On to the pics (yeah, I know my car is really dirty, it rained outta no where).

Old rims and dead Falken's weigh in at 38.4 lbs each.
http://i208.photobucket.com/albums/bb261/YarisKaos/Giovanni%20G817H/DSC_0072.jpg

What are you doing with your old wheels?

[Kaotic Lazagna]

What are you doing with your old wheels?

Plans are to sell them off :wink:

[Pitt Yaris]

Plans are to sell them off :wink:

What's your price estimate?

[Kaotic Lazagna]

What's your price estimate?


What ever is a fair price for them, $200 OBO????

[TEHxFALLEN V1.2]

What ever is a fair price for them, $200 OBO????

OMFG. Srsly? If you do sell, how much w/shipping lol

Any curbing or discrepancies?

[Kaotic Lazagna]

OMFG. Srsly? If you do sell, how much w/shipping lol

Any curbing or discrepancies?

I got them used, so they were pretty curbed already. That's the reason why I don't think I can get anything higher than $200 for them. I also have access for powdercoating for $50 for all four. I would have kept them and just repaired them, but I'm not sure if I want to put all the time and effort into it. hahaha.

They're nice rims, but the offset is only +40. Yeah, I guess spacers can solve that problem. hahahaha.

[TEHxFALLEN V1.2]

If you're okay with it, wanna see if you can quote me with how much it would cost to get it powercoated a dark goldish bronze + shipping to 91303? :drinking:

And what size are they?

[Kaotic Lazagna]

If you're okay with it, wanna see if you can quote me with how much it would cost to get it powercoated a dark goldish bronze + shipping to 91303? :drinking:

And what size are they?

They're 17x7. Powdercoating will be ~$50. However, they will have to be repaired and sanded prior to powdecoating. You might want to PM Clark (MiniTRD) to see if he has a source to do the labor. hahaha.

As for shipping, I entered a box dimension of 23"x8"x23" with a weight of 38.4lbs and got this:


Express Mail® [More info about Express Mail®]
Tue, Jul 20 by 3 PM $152.10
Express Mail® Hold For Pickup [More info about Express Mail® Hold For Pickup]
Tue, Jul 20 by 3 PM $152.10
Priority Mail® [More info about Priority Mail®]
2 days $38.30
Parcel Post® [More info about Parcel Post®]
5 days $22.03

That's per rim, so all four would be at least $150 for shipping, and that's if I can find a box with those dimensions.

[Kaotic Lazagna]

If someone can show/tell me how to dismount the tires, I'm sure shipping will be far less as the 912's weigh in around 22 lbs or something like that from what I remember.

I subtracted just 20 lbs to be safe, and this is what I got:

Express Mail® [More info about Express Mail®]
Tue, Jul 20 by 3 PM $83.50

Express Mail® Hold For Pickup [More info about Express Mail® Hold For Pickup]
Tue, Jul 20 by 3 PM $83.50

Priority Mail® [More info about Priority Mail®]
2 days $25.95

Parcel Post® [More info about Parcel Post®]
5 days $15.30

[AngryGnome]

My new (used) 2007 Sedan:

http://img832.imageshack.us/img832/8884/car2d.png

You can't really tell from the photo... but it's dark blue.

[desiCyrus_Yaris]

My new-er (used) 2009 Sedan in Polar White...minimal yet economical and reliable :-). Up Yaris.

[goliath1812]

2007 sedan. black sand pearl.

[JumpmanYaris]

Ohhhh so thats ur car!

I seen it!

(SSYaris07)

[goliath1812]

heh. wanna trade? :P

[JumpmanYaris]

I'll stick to mine lol

You can make urs look like that

When are you lowering it?

[JumpmanYaris]

I had a bodykit but I took it off

[goliath1812]

lowering!! lol, that's way down the line for me....after a few more things (NST SSK cable bushings, new SRI, braille battery, oil catch can, maybe some MI rad hoses, etc.)... i like the cheap stuff. lol.

[jpadua]

Here a short video clip of our meet last saturday.
http://www.youtube.com/watch?v=NzbbSnjVE_w&feature=player_embedded

[jpadua]

just some new photos of my vios
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/th_IMG_6010.jpg (http://s562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/?action=view&current=IMG_6010.jpg)

[landrym28]

Some nice looking sedans there!

[JumpmanYaris]

Here a short video clip of our meet last saturday.
http://www.youtube.com/watch?v=NzbbSnjVE_w&feature=player_embedded

Cool vod JP

[dan7373]

Hey I'm new here. Love the forum.

Here is a quick pick of my ride.

[dan7373]

Also could I get some opinons on whether or not I should ditch the bug deflector on the hood.

[ERA]

ditch

[Herbicidal]

Also could I get some opinons on whether or not I should ditch the bug deflector on the hood.

x2, ditch. Replace the mono-brow with some color matched eyelids instead. :thumbsup:

[jpadua]

Hey Era love your sig image! is your yaris setup like that?

[jpadua]

yeah dan, ditch the bug deflector :)

[JumpmanYaris]

x4, era , ditch the damn thing lol

[jpadua]

Hey guys! I this maybe a little off topic, but I created this new website! It's a classified ads website specifically for wheels. Its a neat concept coz I've always wanted a single place where you can go and look for wheels used or new, instead of jumping into so many different forums everywhere.

http://www.wheelsearcher.com

I just finished it, logo not even final yet but the classifieds are operational! So if you guys have any rims you'd like to sell, create an account and post it! Or if you know of anyone selling, please tell them about it. I need help getting it filled with ads.

I hope you guys can help me out, It's perfect for wheel whores hahah. :) Thanks and sorry for the Off-topic

@Era

dude, is your yaris, stanced like your sig? Loving it!

[dan7373]

yeah dan, ditch the bug deflector :)


Yea didn't take much to twist my rubber arm on that one. Took it off last night.

It's been there since I bought it in 2007 and I was always wrestling with taking it off or not. I thought it kinda complimented the tint...

Anyhow looks alot cleaner now. Any other suggestions? Going through this forum there are some really sick yaris' especially sedans.

jpadua yours is wicked. That is more the route I want too take. Where did you get that grill?

[Herbicidal]

Any other suggestions? Going through this forum there are some really sick yaris' especially sedans.
Well, you're in the sedan thread! Haha! :biggrin:

A "drop" and rims/tires make the biggest visual improvement, then it's little things like eyelids, grills, center exit exhaust, etc. Subtle touches while retaining a "clean" look. I rebadged my car at the rear and shifted around the badges, now I get double-takes all the time with people trying to figure out what the heck a Vios is! That's what I like anyway. :cool:
http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=2201

Welcome to Yaris World, by the way. :smile:

[dan7373]

Thanks Herbi,

Your car looks great!

I have thought about getting a little drop.... don't know yet. Does it take away from performance? I live in Canada and have to deal with winter driving.

All I have done to it so far is tinted it and debadged it. Haha I get looks from people trying to figure out if its a Carolla or Camery! haha

[Herbicidal]

Thanks! Regarding the drop and performance, the lower center of gravity helps with cornering, although the ride does stiffen up depending upon how you lower your car. I've only used the TRD lowering springs with the stock shocks. Definately get a rear anti-sway bar! Huge cornering improvement! If you need to deal with chains, cables or other options, you would want something that will still clear your fender wells without tearing anything up on your car. Perhaps your fellow Canadians will chime in and share their experiences.

[jpadua]

Yea didn't take much to twist my rubber arm on that one. Took it off last night.

It's been there since I bought it in 2007 and I was always wrestling with taking it off or not. I thought it kinda complimented the tint...

Anyhow looks alot cleaner now. Any other suggestions? Going through this forum there are some really sick yaris' especially sedans.

jpadua yours is wicked. That is more the route I want too take. Where did you get that grill?

Thanks Dan! well, its a bit different in my case cause my car is a Vios coz I live in the PI, funny thing, over here people re badge their vios to belta or yaris S and paint the clear signals amber hahaha. Anyway we have a lot off Vios accessories over here, but just the regular replacement stuff. All the neat aftermarket stuff is in Thailand.

My grill came from Thailand. I had someone buy it for me at the Rstyleracing store. But I have purchased a lot of other things from their website... www.rstyleracing.com these guys have so much goodies! although their website is in Thai, and it would be difficult to purchase from the website. What I did was I contacted them directly through email, told them the item I wanted to order. They gave me their paypal account and as soon as I sent payment, they emailed me right away with shipping info.

oh about lowering, it would really look so much better, but if you use chains for snow, having it too low might give you a problem. If you just use snow tires then you can lower it nicely.

[visia]

long time no post hehe. became silent reader make me wanna show my car too. so here its my car

http://th08.deviantart.net/fs71/PRE/i/2010/235/8/b/fhfdhdf_by_our_avenue.jpg


http://fc04.deviantart.net/fs70/i/2010/235/a/5/gchjcuyf_by_our_avenue.jpg


http://th00.deviantart.net/fs71/PRE/i/2010/235/e/b/gjgj_by_our_avenue.jpg

[jpadua]

wow! I like the painted 2010 grill! nice and clean!

[visia]

wow! I like the painted 2010 grill! nice and clean!

thanks hehe, but still your car is the best here hehe

[jpadua]

thanks hehe, but still your car is the best here hehe

hehe Thanks Visia! I was really planning on having my grill painted bodycolor, but I decided to try it out chrome first.

Good job, I think it looks good that way:)

[visia]

hehe Thanks Visia! I was really planning on having my grill painted bodycolor, but I decided to try it out chrome first.

Good job, I think it looks good that way:)

its hard to find a place to chrome here in my country indonesia :cry:

[Princess B]

My Sedan!!

[jpadua]

Lower it! :D and get some nice spankin new rims!

[Princess B]

I am currently unemployed right now *sigh* But I wanna get a body kit and I paid extra for the rims when I bought my car so I think those are the last thing thats gonna go unless I can get some badass rims for somewhat cheap. You know of anywhere?

[mercykill3r]

Just to spice up the Sedan Thread. Here, I share my ride. Love Sedan

My simple white sedan :smoking:

[jpadua]

Hey nice lip kits... the front lip looks like the Aeroklass Kit, but the side skirts and rear are different? What kits are you using bro?

[mercykill3r]

Hey thanks. Yeah i did some mix and match. the front is Aeroklas srv kit. but the side skirt and rear are from TRD sportivo kit which is actually an OEM kit for a top grade sedan being sold over here.

Here's another shot of my ride and my friend's. Take note that my friend is using fully trd sportivo bodykit. :biggrin:

[fnkngrv]

pic I took last night...

http://images.myphotoalbum.com/f/fn/fnk/fnkn/fnkng/fnkngrv/albums/album02/img_0169.sized.jpg

pic I took this morning...

http://images.myphotoalbum.com/f/fn/fnk/fnkn/fnkng/fnkngrv/albums/album02/img_0173.sized.jpg

I will be doing a photoshoot once I have my body kit and turbo installed

[jpadua]

I got a hold of my sister's Canon 500D, heheh... I think I want to get myself one now.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/August%2029%202010/IMG_6901.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/August%2029%202010/IMG_6900.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/August%2029%202010/IMG_6897.jpg

[ERA]

pics I took last night while installing my new CF Hood...

http://images.myphotoalbum.com/f/fn/fnk/fnkn/fnkng/fnkngrv/albums/album02/img_0123.sized.jpg

http://images.myphotoalbum.com/f/fn/fnk/fnkn/fnkng/fnkngrv/albums/album02/img_0124.sized.jpg

nice.

[TRD_4_LIFE]

THERE R SOME RSOME RIDES OUT THERE... HOPE LIKE MINES...

http://i182.photobucket.com/albums/x286/osiri4life69/TSOC/kdk_1912cool.jpg

[jpadua]

wow, what kind of paint is that?

[Princess B]

ya that's an awesome looking color

[sickpuppy1]

Looks like Photoshop chrome red, very good looking though!! Nice job!

[Princess B]

I'm trying to upload photos to the thread and it's saying that my submission couldn't be processed cuz a security token is missing. Anyone know how to fix that problem?

[rene0023]

Here's mine after the Tanabe NF210's.
Very Nice!

[fnkngrv]

I'm trying to upload photos to the thread and it's saying that my submission couldn't be processed cuz a security token is missing. Anyone know how to fix that problem?



drop PC from at least 3 floors up....j/k

Try deleting all of your cache for your browser and try again

[visia]

hey jpdua you know what, your car has become the topic that my forum friends talking about . how awesome your car ahaha

[Princess B]

Some Sedans From the Meet on Saturday

[LA Yaris]

I look funny in that pic.

[id3379]

My 08 Sedan

http://i44.tinypic.com/xbe635.jpg

http://i45.tinypic.com/25jwglv.jpg

[LA Yaris]

^^ NICE CAR TO BAD YOUR SELLING ALL YOUR PARTS

[Brian]

I just realized that I've never posted pics of my car in this thread so here it is.

http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_013.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_012.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_011.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_010.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_007.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_002.jpg

[Kal-El]

Pretty impressive Brian. :thumbsup:

Must've cost you as much in mods as the Yaris originally cost!

[Princess B]

I look funny in that pic.

lol no you don't!

[Brian]

Pretty impressive Brian. :thumbsup:

Must've cost you as much in mods as the Yaris originally cost!

I'm affraid to add up the cost of everything. It's close to $10k though.

[viosnunza]

ืNew update My car..

Side Mirror Craft Square and DEFI Advance BF /DEFI Advance ZD

[ross sez]

New here, posting pics later on of my stock '08 5spd Yaris.

How can I remove the amber from the head light housing? Som

[fnkngrv]

New here, posting pics later on of my stock '08 5spd Yaris.

How can I remove the amber from the head light housing? Som

search for the DIY on how to paint or black out the headlights...you essentially have to bake your housing, pull apart, remove the amber panel and then reseal. I have seen in person when someone has done that and it looks shotty IMHO. If you are concerned with having clear corners then your best bet would be to buy a pair of Vios HLs since they have clear corners. You can find them on eBay in SW Asia from time to time.

[ross sez]

Just bought this last week... my 2008 Yaris w/ 5 spd manual.

Currently no mods, planning on purchasing a set of the 15" scion OEM rims within the next couple of weeks... then not sure where I'm going from there!

http://i52.tinypic.com/2ir40t2.jpg

http://i56.tinypic.com/2qimfxz.jpg

http://i53.tinypic.com/2lmbaqh.jpg

Suggestions maybe?

[Herbicidal]

...then not sure where I'm going from there!
Going? How about lower, but that's just me. :biggrin: Welcome to Y.W, by the way. :smile:

[derickveliz2]

Just bought this last week... my 2008 Yaris w/ 5 spd manual.
Currently no mods, planning on purchasing a set of the 15" scion OEM rims within the next couple of weeks... then not sure where I'm going from there!

Suggestions maybe?

Welcome ross sez! Where are you? I'm in Warren MA :thumbsup:

D.

[ross sez]

Welcome ross sez! Where are you? I'm in Warren MA :thumbsup:

D.

Thanks everybody. I'm in Ludlow

[derickveliz2]

Thanks everybody. I'm in Ludlow

You are welcome!
we should meet some day (just 25 minutes from home) and then you can see all my mods, I'll give you some good tips too!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/c476b504.jpg

[Herbicidal]

You are welcome!
we should meet some day (just 25 minutes from home) and then you can see all my mods, I'll give you some good tips too!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/c476b504.jpg

OH NO!!! Don't show him your sound deadening project!!! :eek: :biggrin:

[derickveliz2]

OH NO!!! Don't show him your sound deadening project!!! :eek: :biggrin:


LOL
Herb... that was supposed to be a secret :biggrin:

.:w00t:

[sickpuppy1]

Sound deadening? You have a deadening project?! Do tell!

[Herbicidal]

Sound deadening? You have a deadening project?! Do tell!

No no no no no no!!! DON'T get him started!!! :tongue:

[derickveliz2]

No no no no no no!!! DON'T get him started!!! :tongue:



What?... I didn't hear you :iono:




Lets move on... this is the OFFICIAL Yaris SEDAN thread...

LINK to In Car Entertainment + Electronics (audio / video / alarm) (http://www.yarisworld.com/forums/forumdisplay.php?s=&daysprune=&f=20)


.:thumbsup:

[packetrace]

Where can I found lip kit wor CANADA yaris sedan 2009 and what would be the best color for led, panel paint and seat in a black yaris ? and what is the beat way to install led everywhere in a car ?

[fender_boi]

I just realized that I've never posted pics of my car in this thread so here it is.

http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_013.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_012.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_011.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_010.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_007.jpg
http://i35.photobucket.com/albums/d155/MASUMOBJ/Fairmount%20Park%20meet/FairmountPark_002.jpg

where did you get your projector fog lights? i want to get one..

[fnkngrv]

^ Pretty sure he bought them from MicroImageOnline:

http://shop.microimageonline.com/Projector-Foglight-Kit-YARIS-SEDAN-Yaris-sedanFL.htm

I will be upgrading to those myself prolly next spring from the ones that I have.

[yarisugi]

Brian, no matter how many times I see your sedan I never get tired of it. Very clean and well thought out.

[Kal-El]

Brian, no matter how many times I see your sedan I never get tired of it. Very clean and well thought out.

Yup, and that color... :thumbsup:

Brian, is that a factory color in the Philippines? It looks great, wish we had it in the US. Interestingly enough, there's 3 kinds of blue that the sedan is available in in the states, yet none as nice as yours.

We get Blue Streak Metallic, Pacific Blue Metallic, and Zephyr Blue Metallic for the sedan.

Then the LB has Blazing Blue Pearl, and Bayou Blue Pearl.

Amazing how many blues Toyota paints the Yaris with, and all very different.

[Brian]

Yup, and that color... :thumbsup:

Brian, is that a factory color in the Philippines? It looks great, wish we had it in the US. Interestingly enough, there's 3 kinds of blue that the sedan is available in in the states, yet none as nice as yours.

We get Blue Streak Metallic, Pacific Blue Metallic, and Zephyr Blue Metallic for the sedan.

Then the LB has Blazing Blue Pearl, and Bayou Blue Pearl.

Amazing how many blues Toyota paints the Yaris with, and all very different.

As far as I know it was only a factory color in North American. Only available for the '07 and '08 sedans. It is available on many other Toyota vehicles. The paint code is 8S6 and called nautical blue.

[Kal-El]

As far as I know it was only a factory color in North American. Only available for the '07 and '08 sedans. It is available on many other Toyota vehicles. The paint code is 8S6 and called nautical blue.

I'm not sure about Canada, but it was never available on the Yaris in the United States.

So you repainted yours? What was the original color?

[Brian]

I'm not sure about Canada, but it was never available on the Yaris in the United States.

Actually it was. I'm in California.

[Kal-El]

Wait a second...

Is this the same color? Brian, yours just looks so much different modded that I was thrown off. I guess Toyota did stop offering nautical blue. I see them all the time so I thought it was still offered. Now they don't offer any dark blue. :confused:

[Kal-El]

Actually it was. I'm in California.

LOL, I was looking at Fender Boi's profile as he quoted your post.

Sorry.:tongue:

[monchito18]

new pics of mine
http://i153.photobucket.com/albums/s219/djucw/yaris/deesquina.jpg
http://i153.photobucket.com/albums/s219/djucw/yaris/1960stylelol.jpg
http://i153.photobucket.com/albums/s219/djucw/yaris/delado.jpg
http://i153.photobucket.com/albums/s219/djucw/yaris/defrente.jpg

[.Kevin.]

hmm

[roadie]

some nice cars in here!
i just got mine last week and here's what it looks like for now :gap:
http://farm5.static.flickr.com/4138/5052866835_74146c89e6_b.jpg

[Kaotic Lazagna]

^ what gap :wink:

http://i208.photobucket.com/albums/bb261/YarisKaos/Photoshop/5052866835_74146c89e6_b.jpg

[.Kevin.]

too low in that ps

[derickveliz2]

.

Did you notice that the Tundra got lowered springs too!

LOL

[Kaotic Lazagna]

too low in that ps

hmmm, I'm guessing you think my car is too low then, since the fender gap I did on that PS is about the same as mine:

http://farm5.static.flickr.com/4152/5054910415_2c78851485_b.jpg (http://www.flickr.com/photos/54293626@N08/5054910415/)DSC_0011 (http://www.flickr.com/photos/54293626@N08/5054910415/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

[Kaotic Lazagna]

.

Did you notice that the Tundra got lowered springs too!

LOL

Not it didn't, but the room may have shrunk ~2 inches. hahahahahahaha

[.Kevin.]

Mm way too low for where I live since we get snow, and eh I dont like the body looking like it overlaps the wheels might just be me though

[derickveliz2]

Kaotic... As good as usual, your ride looks better every time you post a photo, like I said before the inspiration to lots of us.

Kevin... Yes I know what you mean with the snow, but there is a balance.

Cheers!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/c476b504.jpg

[roadie]

hey kaotic, that chop looks really good :drool:

[roadie]

deric is that an overlay on the headlights or eyelids?
also that's one nice looking grill !

[derickveliz2]

deric is that an overlay on the headlights or eyelids?
also that's one nice looking grill !

Eyelids!

Thank Kaotic he forced me to buy one. Well when I saw his it was a must have.

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg

[roadie]

they came out look really good ! did you get them from MI? there aren't many vendors on here and i couldn't find that grill that you have =(

[derickveliz2]

they came out look really good ! did you get them from MI? there aren't many vendors on here and i couldn't find that grill that you have =(

Thanks,
Yeah! Micro Image is the way to go!

D.

[roadie]

seems like they got all the goods !!! well i might as well and go to their meet today

[viosnunza]

new vios turbo
400 hp at Wheel

[fnkngrv]

new vios turbo
400 hp at Wheel


Gonna need more details on that one. If you are putting 400 to the ground then I would think you have the record. What is your suspension and drivetrain to accomplish this? Maybe it is just me, but is that a different motor than the 1NZ-FE? Welcome and definitely hope to hear more from you. :w00t:

[Kaotic Lazagna]

Looks like a 1NZ to me. But yeah, that's a whole lotta hp! Nice!

[Kaotic Lazagna]

they came out look really good ! did you get them from MI? there aren't many vendors on here and i couldn't find that grill that you have =(

Yup, eyelids and mesh grill can be found on MI. My DIY guide for the mesh grill is in MI and here as well.

[Kaotic Lazagna]

Kaotic... As good as usual, your ride looks better every time you post a photo, like I said before the inspiration to lots of us.

Kevin... Yes I know what you mean with the snow, but there is a balance.

Cheers!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/c476b504.jpg

Thanks.

Looking good!

[krolos]

My Yaris just turned 36k a few days ago and no problems,
pro installed tint is my only real mod so far,I really like my tinted windows
next will be swaybar, and maybe a more sporty sound muffler.

http://i707.photobucket.com/albums/ww71/crowxm/test009.jpg

[fnkngrv]

My Yaris just turned 36k a few days ago and no problems,
pro installed tint is my only real mod so far,I really like my tinted windows
next will be swaybar, and maybe a more sporty sound muffler.

http://i707.photobucket.com/albums/ww71/crowxm/test009.jpg



nice to see another Jade Sea in the ranks. in all honesty seeing your stock suspension really shows me the difference since I installed my AMR springs. if you are considering the sway bar you very well may want to consider lowering springs. the springs made it feel like a whole new car to me, for the better.

[roadie]

krolos can you post more pics of that roof rack?

[viosnunza]

Gonna need more details on that one. If you are putting 400 to the ground then I would think you have the record. What is your suspension and drivetrain to accomplish this? Maybe it is just me, but is that a different motor than the 1NZ-FE? Welcome and definitely hope to hear more from you. :w00t:

http://www.youtube.com/watch?v=qCwZv6-epcc

[.Kevin.]

SHIT a roof rack on a Yaris, thats intense

[krolos]

krolos can you post more pics of that roof rack?

IT is a Thule Rack and they make a fit kit for the Yaris sedan
the wind fairing is a must , it really howls without it
check out their website at thule.com

http://i707.photobucket.com/albums/ww71/crowxm/test008.jpg

http://i707.photobucket.com/albums/ww71/crowxm/Picture167.jpg

[SimTronik]

Thanks,
Yeah! Micro Image is the way to go!

D.

which one did you bought?

[ERA]

hmmm, I'm guessing you think my car is too low then, since the fender gap I did on that PS is about the same as mine:

http://farm5.static.flickr.com/4152/5054910415_2c78851485_b.jpg (http://www.flickr.com/photos/54293626@N08/5054910415/)DSC_0011 (http://www.flickr.com/photos/54293626@N08/5054910415/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

dayum.

shits hot.

[Kaotic Lazagna]

Thanks! :thumbsup:

[JumpmanYaris]

I need that Vios turbo well atleast the motor and all that

[Kaotic Lazagna]

^ +1 million, billion, kajillion!!!!!

[JumpmanYaris]

^ +1 million, billion, kajillion!!!!!

You know what that means ?

We would be smoking Garms LB muahahaha no more feeling like the slowest car around hehehe

[jpadua]

Just a photo update... slapped on new rims, Work Eurolines 17x8 wrapped with new tires Falken 205 40 17

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/fitment%20640x480/IMG_6888.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6880.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6878.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6877.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6875.jpg

[derickveliz2]

.

NICE!:thumbsup:

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/fitment%20640x480/IMG_6888.jpg

[SimTronik]

Nice ride, wish i could afford a body kit like that. Or just the RS body kit. But can't find it.

[fnkngrv]

Damn Jay, you have a sweet looking ride.

[krolos]

Ya that is very nice looking.

[jpadua]

Thanks guys!

Just another photo update... with one photochopped heheh :D
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/photchopped.jpg

[jpadua]

kaotic, dayum, how did you get your yaris that low on Tein springs? were on the same springs, but my fender gap is big compared to yours.

[Kaotic Lazagna]

kaotic, dayum, how did you get your yaris that low on Tein springs? were on the same springs, but my fender gap is big compared to yours.

Remember in VUG, you guys found that there are two versions of the S.Tech's there in the PI. hahahaha. That's with my rear lifted 1/2" too. hahaha.

[Kaotic Lazagna]

Can't wait for your Vios to look like the PS'ed one once you get your coilovers on.

[Dj_SloKid]

hmm


hey sup man, where can i get some of those visors, I have the vios ones now and there not really functional

[.Kevin.]

hey sup man, where can i get some of those visors, I have the vios ones now and there not really functional

The window visors you mean?

[jpadua]

hmm I just got them off some local shop here... I know there are good ones over there, dont microimage have them?

[JumpmanYaris]

JP need to get that car some more LOW bro hahaha

[jpadua]

hahaha yeah dude... just a little more :D

[.Kevin.]

I got my visors from the dealership 70 dollars installed lol they are REAL solid and light.

[.Kevin.]

Oh and heres my car as of late.

[MUSKOKA800]

Here are a couple pic's of my TRD equipped aero sedan after finally getting the big wheels bolted up.

[JumpmanYaris]

Nice clean look

[JumpmanYaris]

here is my recent look

[.Kevin.]

Jumpmannnn, SO nice how much does it even cost to get TRD Painted on your car from a shop>?

te tienen enbidia bastante jente mi imagino ; b

[JumpmanYaris]

Jumpmannnn, SO nice how much does it even cost to get TRD Painted on your car from a shop>?

te tienen enbidia bastante jente mi imagino ; b

its a badge like the ones garm sells I just painted it

pa Yo no sabia que sabes espanol de donde eres?

[.Kevin.]

The red thing at the bottom left rear door is a garm sold emblem? o,o Those halo headlights are sweet too.

Soy de espania, eso esplica porque escribo algunas cosas differente :) mi nombre real es Antonio si quierias saber xD

[JumpmanYaris]

The red thing at the bottom left rear door is a garm sold emblem? o,o Those halo headlights are sweet too.

Soy de espania, eso esplica porque escribo algunas cosas differente :) mi nombre real es Antonio si quierias saber xD

ohhhh my bad i thought you was talking about the emblems in the trunk,

its just a red decal i got it off ebay

[JumpmanYaris]

Ohhh que bien yo soy Orlando pero me dicen OJ mucho gusto, Pensaba que eras Canadiense

[.Kevin.]

Oh damn nice, your car would turn tons of heads here seeing as mine being simple does lol its the only 'different' Yaris in town.

Mucho gusto OJ :) nah solo vivo aqui en el frio haha

[JumpmanYaris]

so start modding then.:biggrin:

Pregunta que te ago por que Canada?

[.Kevin.]

I TRY! Money isnt' free sadly.

Eh mi papa vino de Europa con 50 mil Euros i empeso comprar i vender casas ahora vivimos barato pero ya no trabaja el tiene unos 3 mionnes en el banco pienso esta retired i apenas tiene 44 anos lol

Basicamente por mejor vida que no sos un slave para sobrevivir

[JumpmanYaris]

Serca de que estado en estados unidos vives?

[.Kevin.]

Serca de que estado en estados unidos vives?

Vivo en Pacific timezone - Cali? Vivo como 10 horas de vancouver i eso es 3 horas de Seattle

1000km para llegar a Seattle

[why?]

here is my recent look

i just cringe looking at those tires, they just spell bent rims to me.

[JumpmanYaris]

i just cringe looking at those tires, they just spell bent rims to me.

lol them wheels are heavy and strong aint nothing gonna happen, the tire will go first if anything

[ERA]

Here are a couple pic's of my TRD equipped aero sedan after finally getting the big wheels bolted up.

http://www.yarisworld.com/forums/attachment.php?attachmentid=38015&stc=1&d=1288823283

http://www.yarisworld.com/forums/attachment.php?attachmentid=38016&stc=1&d=1288823283



damn.

makes me wish i had gone black.

good stuff.

[Kaotic Lazagna]

On my way to do some errands, I saw a good opportunity to do a photoshoot. hahahaha. What do you guys think? I didn't have a lot of time, so I couldn't move my car around or to another spot.

http://farm2.static.flickr.com/1260/5147356237_2557ffae9b_b.jpg (http://www.flickr.com/photos/54293626@N08/5147356237/)
DSC_0001 (http://www.flickr.com/photos/54293626@N08/5147356237/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4131/5147356273_bbdab1aca4_b.jpg (http://www.flickr.com/photos/54293626@N08/5147356273/)
DSC_0005 (http://www.flickr.com/photos/54293626@N08/5147356273/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm2.static.flickr.com/1131/5147958744_b0e712afc6_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958744/)
DSC_0002 (http://www.flickr.com/photos/54293626@N08/5147958744/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4130/5147958770_da75f6eff7_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958770/)
DSC_0004 (http://www.flickr.com/photos/54293626@N08/5147958770/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4145/5147958808_fefdf30328_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958808/)
DSC_0006 (http://www.flickr.com/photos/54293626@N08/5147958808/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4086/5147356433_8d51d8be8a_b.jpg (http://www.flickr.com/photos/54293626@N08/5147356433/)
DSC_0007 (http://www.flickr.com/photos/54293626@N08/5147356433/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4089/5147958882_46932097a8_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958882/)
DSC_0010 (http://www.flickr.com/photos/54293626@N08/5147958882/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm2.static.flickr.com/1312/5147958910_561d62f6aa_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958910/)
DSC_0012 (http://www.flickr.com/photos/54293626@N08/5147958910/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

http://farm5.static.flickr.com/4014/5147958976_d381209fe7_b.jpg (http://www.flickr.com/photos/54293626@N08/5147958976/)
DSC_0013 (http://www.flickr.com/photos/54293626@N08/5147958976/) by YarisKaos (http://www.flickr.com/people/54293626@N08/), on Flickr

[derickveliz2]

On my way to do some errands, I saw a good opportunity to do a photoshoot. hahahaha. What do you guys think? I didn't have a lot of time, so I couldn't move my car around or to another spot.




The fist one it's a winner! the light, shadows, colors and the composition are really good and love the depth and perspective of the docks on the right! I'm not a big fan of the stars on the lights but in this case looks good... and of course... your rides looks HOT!:burnrubber:

Stunning as usual Kaotic! :w00t:


http://farm2.static.flickr.com/1260/5147356237_2557ffae9b_b.jpg



Derick

[LA Yaris]

:thumbup:

[SolidGamble]

http://www.yarisworld.com/forums/images/funkygarage/1522/Yaris%20Full%20left.jpg
http://www.yarisworld.com/forums/images/funkygarage/1522/Wheels.jpg

[kingbobby83]

Can't wait to start my mods.....

http://img571.imageshack.us/img571/4012/1016100733c.jpg (http://img571.imageshack.us/i/1016100733c.jpg/)

[jpadua]

Finally got my AMR coilovers! I'm very impressed.. high quality tooling, great handling, and most especially the ride is great! Feels like im on S.techs.
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG_7660.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG_7673.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG_7667.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG_7665.jpg

http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG104.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG097.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG096.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG099.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG098.jpg

[Kaotic Lazagna]

Looks awesome, Jay. Can't wait to see the full dropped and full raised pics. hahaha

[jpadua]

Hey laz.... Ive dropped it significantly already heheh.. take note, im running Falkens, 205/40 stretched over 17x8 so my tire diameter is slightly lower :) therefore already lower by half an inch to begin with, with a bigger fender gap.

Here are photos for comparison

Front Before (Tein S.Tech)
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6880.jpg

Front After (AMR Coilovers)
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG097.jpg

Rear Before (Tein S.Tech)
http://i562.photobucket.com/albums/ss67/jpaduadesigns/new%20VIP%20stuff/IMG_6878.jpg

Rear After (AMR Coilovers)
http://i562.photobucket.com/albums/ss67/jpaduadesigns/AMR%20coilovers/Vios-yaris-coilovers/IMG096.jpg

heheh, lowered more by about an inch on both fronts and rears.

[aceng]

word up... im new here...finally make a post. juz wanna share my ride. :)

Wheels : LowenHart DEF X2

Spec:
Frnt : 8j et30, 195/40/R17
Rear: 9j et25, 205/40/R17

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1394.snc4/164607_1672976617091_1017675819_1790780_7013365_n. jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs744.ash1/163621_1673287184855_1017675819_1791138_645669_n.j pg

http://i838.photobucket.com/albums/zz307/aceng747/my%20ride/IMAG0186.jpg

future plan: 25mm spacer :evil:

http://i838.photobucket.com/albums/zz307/aceng747/my%20ride/IMAG0178.jpg

[jpadua]

Hey good job fitting those rims! good thing you found those tires to stretch on. Did you do 5 lug conversion? or are your rims 4x100?

[aceng]

^^bro... amazed 2 see u here. ur yaris is like everywhere. :) im aceng from VipStyle Society Msia. :)

btw, i bought d wheels from japan 2gether with tires. lucky 4 me,at japan 195/40 aint that rare if compare 2 Msia. lol... i know,i love japan too. :w00t:

mine are 4H 100pcd still. :)

[jpadua]

^^bro... amazed 2 see u here. ur yaris is like everywhere. :) im aceng from VipStyle Society Msia. :)

btw, i bought d wheels from japan 2gether with tires. lucky 4 me,at japan 195/40 aint that rare if compare 2 Msia. lol... i know,i love japan too. :w00t:

mine are 4H 100pcd still. :)

Hey bro! I didnt realize it was you until you replied! good job on the rims! im so jealous hehehe... its so great to find rims that are 4x100 :) changing the knuckle to 5 stud is sorta like cheating hahah LOL. Its really a challenge to find 4x100 rims that are really nice, brand and specs wise, so finding one is like finding gold! heheh congrats bro. I havent seen your update on VIPstylesociety yet... let me check...

by the way what adjustables are you using?

[jpadua]

bro I thought you drove a myvi? heheh

[aceng]

Hey bro! I didnt realize it was you until you replied! good job on the rims! im so jealous hehehe... its so great to find rims that are 4x100 :) changing the knuckle to 5 stud is sorta like cheating hahah LOL. Its really a challenge to find 4x100 rims that are really nice, brand and specs wise, so finding one is like finding gold! heheh congrats bro. I havent seen your update on VIPstylesociety yet... let me check...

by the way what adjustables are you using?

im using local made adjustable brand GAB. from ur pic,our adjustable look d same,only urs is nicer. :thumbup:

i guess we both ady found our gold ey? but maybe 4 d future im gonna redrill my knuckle coz 4x100 wheels are seriously pricey!! hehe
btw,i ady bought 25mm spacer,now waiting 4 d shipment .... oh wish me luck wit those badass.. im gonna poke n lower. wuts ur future plans bro?

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs801.snc4/68163_1764421835325_1382504770_31882805_2431952_n. jpg

bro I thought you drove a myvi? heheh

i was...but ady changed 2 vios/yaris sedan/belta. i need a sedan. lol

[jpadua]

@aceng Damn those are thick!!! nice! your really goin wider!

Just had a quick shoot today hope you guys like the pix

http://i562.photobucket.com/albums/ss67/jpaduadesigns/Photoshoot%20Jan30%202010/vios3.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/Photoshoot%20Jan30%202010/vios2.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/Photoshoot%20Jan30%202010/vios1.jpg

[matthewai]

its pretty straight up

[jpadua]

Ride update: VIOS 08

Still have a long way to go.. but getting there slowly I think :) posting this to share to other vios owners. Vios hard to flush with stance, front liner too shallow. Rear has not camber adjustment. Here are some thing I did to remedy that. Hope this would be useful to other Vios owners.

Added additional -1 degree camber using EZ Shim on rear wheels, so it comes out to about -1.5? (including the natural camber on the drop). Went back to my 5mm spacer, but damn, I felt like I was murdering my tires on the free way... I hate our roads here... I'll try to use a bigger Spring Cushion to lessen the shock play, maybe it would help. Rim to fender now at 5cm, used to be 6cm. Rear dampers at Full Stiff.

Front wheels now at -1 degree camber, also lowered an additional half inch. Rim to fender now at 6cm. Dampers at 5 clicks (1 soft - 8 hard)

Used a heat gun on the liner, it works like a charm!!! Liner rubbing.... GONE!, heated it up, took a wet rag and pushed it in. The water from the wet rag, hardened the plastic in seconds.

Here are some pix:

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8223.jpg
Smaller space now in between, much... still flush though no poke. Once I find 205 35 18, I can fix that fitment.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8225.jpg
Had to saw off a portion of my front lip kit to clear the tires when turning. My finger can barely fit in between.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8227.jpg
Now lower about half inch from before. Finally at 0 finger.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8235.jpg
Camberlicious! loving the new camber on the rear.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8237.jpg
Closer view of the side profile, front wheels still flush.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8241.jpg
Thats it for now maybe until I find 205 35 18 for the front, I can lower it some more.

[malibuguy]

I just picked mine up last night...then we got snow

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182944_10150186439980278_524470277_8664620_3529827 _n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183508_10150186440015278_524470277_8664621_1396798 _n.jpg

[donchae]

here's mine :):wub: sorry pic's a little blurry
first drop of snow for the year woop!

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180699_10150150321970407_515090406_8059720_6054929 _n.jpg

That's in KM..
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash1/182733_10150150321825407_515090406_8059717_438387_ n.jpg

[jpadua]

some new photos

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Fort%20Shoot%20Feb%2027%20Vios/mckinley.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Fort%20Shoot%20Feb%2027%20Vios/highstreet.jpg

[ERA]

^ nice. ive seen this sedan in many different stages.

i like this one especially. good job.

[lady-bug]

Some new pics since I got my foglights installed.

http://photos-b.ak.fbcdn.net/photos-ak-snc1/v2182/133/104/1667442286/n1667442286_127097_5504.jpg

http://photos-c.ak.fbcdn.net/photos-ak-snc1/v2182/133/104/1667442286/n1667442286_127098_6338.jpg

And my car next to a local stock one
http://photos-a.ak.fbcdn.net/photos-ak-snc1/v2182/133/104/1667442286/n1667442286_127096_4436.jpg

do you have to remove the whole bumper to install the fog lights

[lady-bug]

Ride update: VIOS 08

Still have a long way to go.. but getting there slowly I think :) posting this to share to other vios owners. Vios hard to flush with stance, front liner too shallow. Rear has not camber adjustment. Here are some thing I did to remedy that. Hope this would be useful to other Vios owners.

Added additional -1 degree camber using EZ Shim on rear wheels, so it comes out to about -1.5? (including the natural camber on the drop). Went back to my 5mm spacer, but damn, I felt like I was murdering my tires on the free way... I hate our roads here... I'll try to use a bigger Spring Cushion to lessen the shock play, maybe it would help. Rim to fender now at 5cm, used to be 6cm. Rear dampers at Full Stiff.

Front wheels now at -1 degree camber, also lowered an additional half inch. Rim to fender now at 6cm. Dampers at 5 clicks (1 soft - 8 hard)

Used a heat gun on the liner, it works like a charm!!! Liner rubbing.... GONE!, heated it up, took a wet rag and pushed it in. The water from the wet rag, hardened the plastic in seconds.

Here are some pix:

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8223.jpg
Smaller space now in between, much... still flush though no poke. Once I find 205 35 18, I can fix that fitment.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8225.jpg
Had to saw off a portion of my front lip kit to clear the tires when turning. My finger can barely fit in between.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8227.jpg
Now lower about half inch from before. Finally at 0 finger.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8235.jpg
Camberlicious! loving the new camber on the rear.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8237.jpg
Closer view of the side profile, front wheels still flush.

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8241.jpg
Thats it for now maybe until I find 205 35 18 for the front, I can lower it some more.

how much was your grille, and body kit seperately

[JumpmanYaris]

do you have to remove the whole bumper to install the fog lights

Yes

[viosnunza]

new look

[JumpmanYaris]

loving it man. i wish i had a couple things you have

[jpadua]

new look

dude! love the new paint! awesome job

[kingbobby83]

I like that color..nice set up as well!

[lady-bug]

Mine

can you please tell me what brand and size bulbs you used for your altezza lights please:bow:

[lady-bug]

daylight led

are those on the inside or outside

[cdu]

I like the stock rims...not sure where to find them.

[shima]

I'm new here, but I've been a first gen (well US first gen since these existed overseas long before they came to the US) 2007 Yaris owner since I ordered mine from the factory and received it back in September 2006. It not has 59,000 miles on it... I'll likely hit 60,000 this week.

These photos are from when I first got it back in 2006. I need to take some more recent photos of it. I just got some of it re-painted to fix paint missing from rock chips in the front of the car and to fix places where luggage had removed paint in the back of the car... so my car got re-polished again and looks like new on the paint now which makes me very happy.

I plan to get new wheels for it at some point, still riding the originals and the plastic hubcaps have gotten scratched up a bit... I've got my eyes on some nice looking wheels for later in the year.

Also my boyfriend just bought himself a new stereo for his 1993 Toyota Supra, so once he gets his current stereo out of there (which is actually a really nice one, he just got himself an even nicer one, heh) we're going to get a new fitting for where my audio stuff is currently and install his "old" stereo system in my car :) (that will probably happen in the next month or two)

http://www.photography-by-cat.com/photos/94771774_zidjR-L.jpg

http://www.photography-by-cat.com/photos/94771922_ChV84-L.jpg

[Kal-El]

^^ Welcome :smile:

[shima]

^^ Welcome :smile:

Thanks! Looking forward to participating in here more as I start improving the car this year :)

[fujiwaru]

Welcome to Yarisworld :thumbup:

[JumpmanYaris]

Thanks! Looking forward to participating in here more as I start improving the car this year :)

Welcome to the world of Yaris!

When does moding start?

[JumpmanYaris]

new look

Hey do you still have the fender liner In ur car ?
I am gonna say no, but just curious, I just had mine replaced because the 18" I had on the car rubbed every where in the liner and it wore the hell out of it and I was scared water might cross over to where the fogs are and damage them.

[SeBolivar]

I watch all photos, the 55 pages of this thread, very amazing somebody Yaris :coolpics::coolpics::coolpics::coolpics::coolpics:

[Yaris4L1fe]

Just wanted to add mines to this thread!! :)

[miikeydakiid]

:biggrin:

[jpadua]

Latest pix
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Vios%20April%2012/ucc.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Vios%20April%2012/nikon_7100_small2.jpg

[Vanquisher]

:wink:

http://i303.photobucket.com/albums/nn136/vs_vanquisher/1st%20facelift/IMG_0133.jpg
http://i303.photobucket.com/albums/nn136/vs_vanquisher/1st%20facelift/IMG_0127.jpg
http://i303.photobucket.com/albums/nn136/vs_vanquisher/1st%20facelift/IMG_0128.jpg
http://i303.photobucket.com/albums/nn136/vs_vanquisher/1st%20facelift/IMG_0129.jpg
http://i303.photobucket.com/albums/nn136/vs_vanquisher/1st%20facelift/IMG_0134.jpg

[JumpmanYaris]

Here is my Sedan up to date

Suspension: Megan Coilovers

Wheels: XXR 522 15" Chromium Black

Tires: 185/55/R15

[monchito18]

Latest pix
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Vios%20April%2012/ucc.jpg
http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/Vios%20April%2012/nikon_7100_small2.jpg

Nice!!!! :thumbup::clap:

[Herbicidal]

Looks very stealthy JumpmanYaris. :thumbsup: Just curious why you haven't added color matching eyelids? I think it would give your car an even more sinister look. My .02 anyway.
:headbang:

[JumpmanYaris]

Looks very stealthy JumpmanYaris. :thumbsup: Just curious why you haven't added color matching eyelids? I think it would give your car an even more sinister look. My .02 anyway.
:headbang:

I thought about it before but the headlights are already black, Idk

[Herbicidal]

I thought about it before but the headlights are already black, Idk

Maybe one of your pics can be photoshop'd to see what it would look like. Personally, I think it gives the car (especially the sedans) a more squinty-eye aggressive look vs this: :eek:. I've fooled quite a few people who were trying to figure out what my car is with the addition of those eyelids. Haha! Regardless, I like the look of your ride. :cool:

[JumpmanYaris]

Ill try to do it

[matthewai]

just got this from camelll figured id post it
i think its awesome
thanks

[.Kevin.]

^I got one too these whip ass.

[Kaotic Lazagna]

I can't remember if I posted this here already:

http://i208.photobucket.com/albums/bb261/YarisKaos/04-17-11%20Yaris%20Meet/DSC_0007.jpg

[camelll]

Laz the car is looking good, I love the look of blacked out housings with projectors and eyelids. Looks sick! Matthewai I am glad you like it!

[matthewai]

http://i562.photobucket.com/albums/ss67/jpaduadesigns/pitimini/OZ%20Futura/IMG_8235.jpg
Camberlicious! loving the new camber on the rear.

.

hey can i ask you what exhaust this is or is it just a dual tip ? i like the dual look and am going to try to cut and weld a straight pipe with a tip like yours (does anyone know the exhaust piping diameter ? 2 inch?)i like the angled square look too

http://www.etdzmachinery.com/uploadfile/bigpro/20111716465564446.jpg

[Thirty-Nine]

I can't remember if I posted this here already:

http://i208.photobucket.com/albums/bb261/YarisKaos/04-17-11%20Yaris%20Meet/DSC_0007.jpg

DAMN that's hot. :bow:

[Kaotic Lazagna]

Thanks Mike and Andy. =D

[2010.YARIS.SEDAN]

Heres mine before I drop it.

Your YARIS looks great where did get your body kit skirting from how much$ looks great mine is the same color no skirting yet.

[giecoyeinram]

here is mine...hope every body like it!

[giecoyeinram]

i have another one pics.....